cross section A-A 0,2 0,3 12,5 A 10,8 riveted nut : Nietmutter / l = 3,7/5,6/6,0/6,3 #4-40 A M3 oder/ or 0,3 Einpressbolzen / Gewindehulse press-fit bolt / threaded sleeve : #4-40 27,5 Einpressbolzen press-fit bolt : M3 oder/ or 0,3 #4-40 39,1 M3 oder/ or Schnitt A-A / 3,2 min. 4,5 3,2 min. 3 13,72 6,3 (min. 2.5) l 6,4 6,3 (5.9) Abstandshulse / standoff : Gehause genietet +0,13 Nietmutter mit Klemmteil 3,2 M3 riveted housing : 3,05 clamping thread : 124642 8,3 +0,2 5,8 25,1 33,3 Polzahl / 0,2 Terminal Length : Bauart / 3W3 Zubehor / Logo : 207=0.8m (30 in) Au CONTACT, TIN/LEAD TERMINAL ERNI Accessory : Sonderausfuhrung / 6.3 mm Refer to table on page 2 Special : Refer to table on page 2 metal plating of plated-through hole fur Einpresskontakt Zeichnung 114110 / for press-fit contact drawing 114110 fur Einpressbolzen Zeichnung 114109 / for press-fit bolt drawing 114109 Information: Class : Board hole pattern 144058 Schichtaufbau im metallisierten Loch / Pressfit Anschlulange / Aufdruck / Leiterplattenbohrbild 144058 / Refer to table on page 2 Terminal Type : Anforderungsstufe / 6,3 +0,2 No. of contacts : Type : max 1,5 6,3 Refer to table on page 2 Part No. : Anschluart / 3,9 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / +0,3 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 15.05.2001 Date TMC-P 3W3-EP36-6.3-3 TMC-P 3W3-EP36-6.3-3 www.ERNI.com a Index Designation M:00023004.SZN 054955 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 6.3mm Number of Pins 3W3 Accessory Termination Side: Pressfit bolt M3 124764 Accessory Termination Side: Pressfit bolt #4-40 134435 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134498 Accessory Mating Side: Threaded sleeve #4-40 134499 Ordering Information press-in tools Number of Pins 3W3 Upper Tool with Quick Change Device Lower Tool 220058 220147 www.erni.com Accessory Termination Side: Pressfit bolt