2-24 Accelerometer – Unamplified
Model 3058
PC Board Mountable Accelerometer
Millivolt Output
Integral Temperature Compensation
Vibration/Shock Monitoring
Modal Analysis
Motion Control
Crash Testing
Aerospace
FEATURES
Adhesive Mount
±0.5% Non-linearity (Typical)
±1.0% Temperature Performance
(Typical)
Dc Response
Built-in Damping
Built-in Overrange Stops
Low Power
STANDARD RANGES
Range g Range g
±2 ●±20 ●
±5 ●±50 ●
±10 ●±100 ●
DESCRIPTION
The Model 3058 is a piezore si st ive silicon ac celerometer with
integral temperature compensation. It is packaged on a ceramic
subst ra te with a metal brac ket which can be used to bol t the
sensor to the mounting locati on.
The acceleromete r consists of a micro machined silicon
mass suspended by multiple beams from a silicon frame.
Pie zor e s ist ors loc at ed in t he be am s c hang e t hei r r es is ta nce a s t he
mo tio n o f the su spend ed ma ss ch an ges th e st ra in in t he be ams.
Sili con caps on the top and bottom of the device are added to
provide ove r-rang e stops. This design provides for a very low
profile, high shock res istance, durability and built-in damping
over a wide usable bandwidth. E ach sensor is individually
serialized.
For an ac ce le ro m et e r d esigned for ad h e sive mo u n t in g, s ee
the Model 3052. F or uncompensated acce lerometers , ple as e
refer to the Mod els 3022 and 3028.
PC Board Mountable Accelerometer Model 3058
Accel erometer – Unamplified 2-25
June 2001
CALIBRATION DATA
Figure 1. Calibration Data Sheet
A calibra tion dat a sheet similar to the sample shown above i s
included with e ach unit. The calibration she et provides the
measured test and calibration data for the sensor.
CONNECTIONS
PIN NUMBER FUNCTION
1GROUND
2ICS USE ONLY
3SUPPLY
4–OUTPUT
5+OUTPUT
RESISTOR FUNCTION OHMS
R1 Rzb 10 - 50
R2 Rset 250 - 350
R3 Rlo 800 - 1250
R5 Rhi 7.5K - 50K
R6 Rstc 3K - 99K
R7 Rztc 0.15M - 4M
Model 3058 PC Board Mountable Accelerometer
2-26 Accelerometer – Unamplified
PERFORMANCE SPECIFICATIONS
Supply Volta ge: 5.0 VDC
Ambient Temperature: 25°C (Unless otherwise specified)
Notes
1. Actual test data for this parameter is included on the calibration sheet
included with each sensor. A sample of this calibration sheet is shown as
Figure 1.
2. The useful frequency range is defined as the range of frequencies over
which the device sensitivity is within ±5% of the DC value.
3. Positive voltage change for positive acceleration; negative voltage
change for negative acceleration.
4. For sensors having resonant frequency greater than 5 kHz, the
calibration data sheet will indicate “>5 kHz”. In addition, the damping
ratio will indicate N/A.
5. Best Fit Straight Line. For full scale ranges of 10g or less, the maximum
non-linearity is ±2%.
6. Compensated temperature range: 0°C to +50°C in reference to 25°C.
7. Prevents increase of TC-Span and sensitivity decrease due to output
loading.
8. 400g for ±2g, ±5g and ±10g versions, 20X or 2000g, whichever is
lower, for other versions.
PARAMETERS
RANGE
UNITS NOTES±2g ±5g ±10g
Frequency Response [MIN] 0-250 0-300 0-400 Hz 1, 2
Mounted Resonant Frequency [MIN] 700 800 1000 Hz 1
Sensitivity (MIN/MAX) 6.0/9.0 2.4/3.6 1.2/1.8 mV/g 1, 3
PARAMETERS
RANGE
UNITS NOTES±20g ±50g ±100g
Frequency Response [MIN] 0-600 0-1000 0-1500 Hz 1, 2
Mounted Resonant Frequency [MIN] 1500 2000 3000 Hz 1, 4
Sensitivity (MIN/MAX) 0.6/0.9 0.24/0.36 0.12/0.18 mV/g 1, 3
PARAMETERS MIN TYP MAX UNITS NOTES
Zero Acceleration Output 1 2 ±mV 1
Damping Ratio 0.4 0.7 0.9 1, 4
Non-linearity 0.5 1±% Span 5
Transverse Sensitivity 13±% Span
Output Resistance 2.5 3.5 6.5 kΩ
Temperature error - Sensitivity 1.0 2.0 ±% Span 1, 6
Temperature error - Zero 1.0 2.0 ±% Span 1, 6
Supply Voltage 5.0 10.0 VDC
Current 1.5 mA
Output Noise 1.0 µV p-p
Output Load Resistance 5 MΩ7
Acceleration Limits (Any Direction) 20X Rated 8
Operating Temperature –40°C to +125°C
Compensated Temperature Range 0°C to +50°C
Storage Temperature –55°C to +150°C
Weight 6.5 Grams
PC Board Mountable Accelerometer Model 3058
Accelerometer – Unamplified
June 2001
DIMENSIONS
ORDERING INFORMATION
LTR 2 - 10g 20 - 500g
“A ” D I M 0.300 ± 0.005
[7.62 ± 0.13]
0.265 ± 0.005
[6.73 ± 0.13]
“B” DIM 0.250 ± 0.005
[6.35 ± 0.13]
0.240 ± 0.005
[6.10 ± 0.13]
“C” DIM 0.032 ± 0.004
[0.81 ± 0.10]
0.032 ± 0.004
[0.81 ± 0.10]
3058 - 005 - P
Acceleration
Electrical Connection (P = Pins)
Range
Model
LEADER Electronic Co., Ltd - 116, Jianghuali, Jianghua Road, Jiangmen City, GD, PRC
Tel: + 86 750 3101711, 3379183 Fax: + 86 750 3388669 Website: www.leadersensors.com - e-mail: leader@leadersensors.com
