DESCRIPTION
If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using
your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with
our desires, we'll just have to make do with these handy HC-SR04 Ultrasonic Sonar Distance
Sensors and a pair of flippers. These ubiquitous sensors are really common in robotics
projects, but they can also be used for automation, interactive art and motion sensing. They
work at about 2cm to 400cm away, but we think 10cm-250cm will get you the best results.
These sensors are fast, fairly easy to use, and low cost. They do require powering from 5V for
best results: connect GND (ground) and VCC to 5V power. While the Trig signal can be 3V or
5V, the 'return' Echo signal is 5V logic. For that reason, we include two 10K resistors, use these
as a divider to convert the 5V logic level to a safe 2.5V that you can ready with your 3V device.
You can use this sensor with Arduino, CircuitPython (for microcontrollers or Raspberry Pi) or
MakeCode
We carry a large variety of distance sensors here if this fellow isn't what you're looking for.
TECHNICAL DETAILS
Power & Logic Voltage: DC 5V
Current during measurment: 15mA
Ultrasonic Frequency: 40 KHz
Measuring Angle: 15º
Trigger Input Signal: 10uS high pulse
Sensor dimensions (excluding header): 45.5 x 20 x 15.5mm
Weight: 8.7g
LEARN