www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com
TM
TM
Page <1> V1.024/02/14
250MHz Passive Oscilloscope Probe
Description:
General purpose series 250MHz, 100x xed attenuator oscilloscope probe.
Probe is designed for applications where you need to measure signals with
a higher voltage, up to 1,200V.
Features & Benets:
• 50MHz (-3 dB) bandwidth
• High impedance input (100MΩ / 6.5pF)
• 10−35pF compensation range
• 1,200V CAT I
• Snap-Locking Sprung Hook
• Easily replaceable tip
• Large accessory set
• Meets IEC 61010-031
Specications:
Type : 5mm Passive Voltage
Bandwidth : 250MHz
Attenuation : 100x
Input Impedance : 100MΩ
Input Capacitance : 6.5pF
Output Impedance, ohm : 1MΩ
Risetime : 1.4ns
IEC Rating : 1,200V CAT I
Compensation : 10 - 35pF
Cable Length : 1.2m
Operating Temperature : 0°C to +50°C
Humidity : 85% RH or less (at 35°C)
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Tenma is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
250MHz Passive Oscilloscope Probe 76-130
Accessories included: 15cm Ground Lead, Replacement Tip, Red Snap-on Sprung Hook, Tip Insulator, IC Tip, BNC Adapter,
Probe Tip Ground & Trimmer Tool.
The High Performance family is a high quality, general purpose set of 5mm Passive Voltage Oscilloscope probes. They are
excellent replacement probes for all makes and models of oscilloscopes.
