SF1601G – SF1606G TO-220A 1 of 3 © 2002 Won-Top Electronics
SF1601G – SF1606G
16A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
! Glass Passivated Die Construction B
! Super-Fast Switching for High Efficiency
! High Current Capability C
! Low Reverse Leakage Current
! High Surge Current Capability G A
! Plastic Material has UL Flammability
Classification 94V-O PIN1 2
D
Mechanical Data F E
! Case: Molded Plastic
! Terminals: Plated Leads Solderable per P
MIL-STD- 202, Met hod 208
! Polarity: See Diagram I
! Weight: 2.24 grams (approx.) L
! Mounting Position: Any H
! Marking: Type Number
PIN 1 + +
J PIN 2 - Case
K
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol SF1601G SF1602G SF1603G SF1604G SF1605G SF1606G Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 150 200 300 400 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 V
Average Rectified Output Current @TC = 105°C IO16 A
Non-Repetiti ve P eak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method) IFSM 200 A
Forward Voltage @IF = 16A VFM 0.975 1.3 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 10
400 µA
Reverse Recovery Time (Note 1) trr 35 nS
Typic al Junction Capacitance (Note 2) Cj170 140 pF
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse volt age of 4.0V D.C.
WTE
PO WER SEM ICO NDUC TO RS
TO-220A
Dim Min Max
A14.9 15.1
B— 10.5
C2.62 2.87
D3.56 4.06
E13.46 14.22
F0.68 0.94
G3.74 Ø 3.91 Ø
H5.84 6.86
I4.44 4.70
J2.54 2.79
K0.35 0.64
L1.14 1.40
P4.95 5.20
All Dimensions in mm
SF1601G – SF1606G TO-220A 2 of 3 © 2002 Won-Top Electronics
50
100
150
0
200
250
300
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
10
100
400
0.1 1.0 10 100
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
1605G -1606G
C,CAPACITANCE(pF)
j
0.01
0.1
1.0
10
100
040 80 120
I , INSTANTANEOUS REVERSE CURRENT (mA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
T = 100 C
C°
T = 75 C
C°
T = 25 C
C°
0
4
8
12
16
20
0 50 100 150
I , AVERAGE FORWARD CURRENT (A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C°
0.1
1.0
10
100
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
SF1605G -SF1606G
SF1601G -SF1604G
1601G -1604G
SF1601G – SF1606G TO-220A 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
SF1601G TO-220A 50 Units/Tube
SF1602G TO-220A 50 Units/Tube
SF1603G TO-220A 50 Units/Tube
SF1604G TO-220A 50 Units/Tube
SF1605G TO-220A 50 Units/Tube
SF1606G TO-220A 50 Units/Tube
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wont op.com
