Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 13 CYLINDER TYPE POLYACENE CAPACITORS WAVE FEATURES APPLICATIONS Polyacene Capacitors can store a large number of ions into its amorphous structure (doping), therefore Polyacene Capacitors has much larger capacitance than conventional electric double layer capacitors. Back-up power source for CPU, microcomputer, and flash memory writing when shutting off the power. Load change leveling (life lengthening of main power source such as dry battery, Lithium primary battery) Quick-charge with ampere measure is possible with its Low internal resistance. Power source storage combined with solar cell, fuel cell, generator, and so on. Po s s i b l e to c h a r g e /d i s c h a r g e m o r e t h a n 100,000 t i m e s w i t h less deterioration caused by charging/discharging compared to secondary battery which involves chemical reaction, and that enables to more than 100,000 times charge/discharge and large excellence of durability for over charge/discharge. Main power source for small devices (Measuring equipments, toys and so on). Polyacene Capacitors is environmentally friendly power source, which does not contain any heavy metals such as Cd,Hg and Pb. (RoHS compliant) ORDERING CODE A S 0 PAS 8 1 5 2 R Dimensions/ L [mm] 15 15 16 16 20 20 35 35 40 40 5 1 5 Characteristic Spec LS Low ESR type LA High Capacitance type 0 Maximum Usable VoltageV 2R5 2.5 3R0 3.0 R=decimal point Nominal CapacitanceF example 105 10x105F=1F 506 50x10 6F=50F Dimensions/ D [mm] 08 8.0 10 10.0 12 12.5 18 18 S Type Polyacene Capacitors L SUPER CAPACITORS ENERGY DEVICES P EXTERNAL DIMENSIONS D L d P PAS0815LS2R5105 8.0 15.0 0.6 3.5 Part Number Low ESR type (LS series) PAS1016LS2R5205 10.0 16.0 0.6 5.0 PAS0815LA2R5205 8.0 15.0 0.6 3.5 PAS1020LA2R5475 10.0 20.0 0.6 5.0 PAS1220LA2R5106 12.5 20.0 0.6 5.0 Large Capacitance PAS1235LA2R5206 type (LA series) PAS1020LA3R0405 12.5 35.0 0.6 5.0 10.0 20.0 0.6 5.0 PAS1220LA3R0905 12.5 20.0 0.6 5.0 PAS1235LA3R0206 12.5 35.0 0.6 5.0 PAS1840LA3R0506 18.0 40.0 0.8 8.0 - Unit : mm PART NUMBERS Maximum Usable Voltage (V) Part Number Low ESR type (LS series) Large Capacitance type (LA series) PAS0815LS2R5105 PAS1016LS2R5205 PAS0815LA2R5205 PAS1020LA2R5475 PAS1220LA2R5106 PAS1235LA2R5206 PAS1020LA3R0405 PAS1220LA3R0905 PAS1235LA3R0206 PAS1840LA3R0506 2.5 2.5 3.0 Nominal Capacitance (F) Internal Resistance (m) 1 2 2 4.7 10 20 4 9 20 50 70 50 700 200 150 100 300 200 100 70 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 138 13 LS Series SPECIFICATIONS Operating Temp. Range () Part Number Max. Usable Voltage (V) Initial Capacitance Initial Internal (F) Resistance (m) PAS0815LS2R5105 2570 1.020% Under 70 2.020% Under 50 Highest temperature (70) Capacitance, Internal Resistance : Within initial spec. 2.5 PAS1016LS2R5205 Temperature Characteristics Lowest temperature (25) Capacitance : Over 70% of initial spec. Internal Resistance : Within 4 times of initial spec. LA Series SPECIFICATIONS Operating Temp. Range () Part Number PAS0815LA2R5205 PAS1020LA2R5475 PAS1220LA2R5106 PAS1235LA2R5206 PAS1020LA3R0405 PAS1220LA3R0905 PAS1235LA3R0206 PAS1840LA3R0506 Max. Usable Voltage (V) 2570 2.5 2560 3.0 Initial Capacitance Initial Internal (F) Resistance (m) 2.020% Under 700 4.720% Under 200 1020% Under 150 2020% Under 100 4.020% Under 300 9.020% Under 200 2020% Under 100 5020% Under 70 Temperature Characteristics Lowest temperature (25) Capacitance : Over 70% of initial spec. Internal Resistance : Within 4 times of initial spec. Highest temperature (70) Capacitance, Internal Resistance : Within initial spec. Lowest temperature (25) Capacitance : Over 70% of initial spec. Internal Resistance : Within 4 times of initial spec. Highest temperature (60) Capacitance, Internal Resistance : Within initial spec. PACKAGING Item PAS0815 PAS1016 PAS1020 PAS1220 PAS1235 PAS1840 250 180 Minimum Packing Unit 200 200 100 100 50 10 Standard Inner Packing Box quantity 10bags 2000 10bags 2000 15bags 1500 10bags 1000 10bags 500 20bags 200 Standard Inner Packing Box 200mm(W)x330mm(L)x140mm(H) RELIABILITY DATA Specifications LS Series LA Series 1. Operating Temperature range 2570 2560 2. Max. Usable Voltage 2.5V 2.5V 3.0V Capacitance : Over 70% of initial spec. 3. Floating Charge Characteristics Internal Resistance : Within 4 times of initial spec. Appearance : No noticeable abnormality Capacitance : Over 70% of initial spec. 4. Charge/Discharge Cycle Internal Resistance : Within 4 times of initial spec. Characteristics Appearance : No noticeable abnormality Capacitance : Within initial spec. 5. Thermal Durability Internal Resistance : Within initial spec. Appearance : No noticeable abnormality Capacitance : Within initial spec. 6. Humidity Durability Internal Resistance : Within 4 times of initial spec. Appearance : No noticeable abnormality No exterior abnormality observed : 7. Impact Durability initial spec. values retained No exterior abnormality observed : 8. Vibration Durability initial spec. values retained Items 9. Solder Heat Resistance Capacitance : Within initial spec. Internal Resistance : Within initial spec. Appearance : No noticeable abnormality Test Conditions, Remark Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp. and measure the floating charge characteristics after returning to normal temperature and humidity. Measure the charge/discharge cycle characteristics after 10000 charge/discharge cycle at 255 with under mentioned charge/discharge cycle test condition for each parts. Leave the capacitor in an atmosphere of Max Operationg Temperature2 and 252 consecutively for 96 hours each, and return to normal temperature and humidity. SUPER CAPACITORS ENERGY DEVICES Minimum Packing Unit (Plastic Bag) Temperature : 402, Humidity : 9095%RH Leave the capacitor for 500 hours, and return to normal temperature and humidity. Accorging to JIS C 0041 Sine half wave A=294 Apply a sine wave vibration of 1.5mm amplitude and frequency 1055Hz, for 2 hours per each direction (X, Y and Z), total 6 hours. Material : Sn-3Ag-0.5Cu Solder bath temperature : 2605 Dipping time : 101 sec. Dipping depth : 1.52mm from cell body Charge/Discharge Cycle Test Condition Part Number PAS0815 LS2R5105 PAS1016 LS2R5205 PAS0815 LA2R5205 PAS1020 LA2R5475 PAS1220 LA2R5106 PAS1235 LA2R5206 PAS1020 LA3R0405 PAS1220 LA3R0905 PAS1235 LA3R0206 PAS1840 LA3R0506 Charging Voltage (V) 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 Charging Time (s) 10 10 10 10 10 10 30 30 30 30 Max. Charging Current (A) 1 1 1 1 1 1 2 3 5 10 Discharging Current (A) 1 1 1 1 1 1 0.5 1 1 2 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Cut off Voltage (V) This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 139 CYLINDER TYPE PAS CAPACITOR PACKAGING Minimum Packing Unit (Plastic Bag) Item PAS0815 PAS1016 PAS1020 PAS1220 PAS1235 PAS1840 Minimum Packing Unit 200 200 100 100 50 10 Standard Inner Packing Box quantity 10 bags 2000 10 bags 2000 15 bags 1500 10 bags 1000 10 bags 500 20 bags 200 Standard Inner Packing Box 200mm(W)x330mm(L)x140mm(H) This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_cylinder_pack_e-01 CYLINDER TYPE PAS CAPACITOR RELIABILITY DATA 1. Operating Temperature range Specified Value LR Series 2560 LA Series 2. Max. Usable Voltage Specified Value LR Series 2.3V LA Series 2.3V 3.0V 3. Floating Charge Characteristics LR Series Specified Value Test Methods and Remarks Capacitance Internal Resistance Appearance LA Series : Over 70% of initial spec. : Within 4 times of initial spec. : No noticeable abnormality Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp. and measure the floating charge characteristics after returning to normal temperature and humidity. 4. Charge/Discharge Cycle Characteristics LR Series Specified Value Test Methods and Remarks Capacitance Internal Resistance Appearance LA Series : Over 70% of initial spec. : Within 4 times of initial spec. : No noticeable abnormality Leave the capacitor in an atmosphere of 602 and 252 consecutively for 96 hours each, and return to normal temperature and humidity. Charge/Discharge Cycle Test Condition PAS0815 PAS1016 PAS0815 PAS1020 PAS1220 PAS1235 Part Number LR2R3105 LR2R3205 LA2R3185 LA2R3475 LA2R3106 LA2R3226 Charging Voltage (V) 2.3 2.3 2.3 2.3 2.3 2.3 Charging Time (s) 10 10 10 10 10 10 Max. Charging Current (A) 1 1 1 1 1 1 Discharging Current (A) 1 1 1 1 1 1 Cut off Voltage (V) 1.5 1.5 1.5 1.5 1.5 1.5 Part Number Charging Voltage (V) Charging Time (s) Max. Charging Current (A) Discharging Current (A) Cut off Voltage (V) PAS1840 LA2R3566 2.3 30 5 5 1.5 PAS1020 LA3R0405 3 30 2 0.5 1.5 PAS1220 LA3R0905 3 30 3 1 1.5 PAS1235 LA3R0206 3 30 5 1 1.5 PAS1840 LA3R0506 3 30 10 2 1.5 5. Thermal Durability LR Series Specified Value Test Methods and Remarks LA Series Capacitance Internal Resistance Appearance : Within initial spec. : Within iniial spec. : No noticeable abnormality Leave the capacitor in an atmosphere of 602 and 252 consecutively for 96 hours each, and return to normal temperature and humidity. 6. Humidity Durability LR Series Specified Value Test Methods and Remarks LA Series Capacitance Internal Resistance Appearance : Within initial spec. : Within 4 times of initial spec. : No noticeable abnormality Temperature : 402, Humidity : 9095%RH Leave the capacitor for 500 hours, and return to normal temperature and humidity. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_cylinder_reli_e-01 7. Impact Durability Specified Value Test Methods and Remarks LR Series No exterior abnormality observed : initial spec. values retained LA Series Accorging to JIS C 0041 Sine half wave A=294 8. Vibration Durability Specified Value Test Methods and Remarks LR Series No exterior abnormality observed : initial spec. values retained LA Series Apply a sine wave vibration of 1.5mm amplitude and frequency 1055Hz, for 2 hours per each direction (X, Y and Z), total 6 hours. 9. Solder Heat Resistance LR Series Specified Value Test Methods and Remarks Capacitance Internal Resistance Appearance LA Series Material Solder bath temperature Dipping time Dipping depth : : : : : Within initial spec. : Within initial spec. : No noticeable abnormality Sn-3Ag-0.5Cu 2605 101 sec. 1.52mm from cell body This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_cylinder_reli_e-01 CYLINDER TYPE PAS CAPACITOR PRECAUTIONS 1. Use under the maximum usable voltage If over maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime and sometimes damage PAS capacitor. 2. Use under maximum operating temperature Not only shorter life time but also leakage and damage will happen by increasing internal pressure if PAS capacitor use in over max operating temperature. 3. Limited life time Lifetime of PAS capacitor is greatly affected by surrounding temperature. 10 drop in temperature extend its expected lifetime approximately twice as much. Design a circuit under consideration of deterioration of electrical characteristics after long time usage, decreasing in capacitance and increasing in internal resistance. 4. The electrical characteristics of capacitors vary with respect to temperature The electrical characteristics of PAS capacitors temporarily vary with respect to temperature separately from secular change mentioned above. Design a circuit under consideration of temperature characteristics. 5. PAS capacitor has polarity PAS capacitor has polarity. Please check the polarity before use. It will be damaged if it is reversely charged. 6. Mind high ripple current or rapid charge / discharge In circuit with high ripple current or rapid charge / discharge, the lifetime of PAS capacitors might be shortened by self-heating. 7. Mind voltage drop when discharging When back-up (discharging) starts, voltage drop because of active current and internal resistance. 8. Series connection In case of using PAS capacitor in series connection, the voltage of each capacitor is not always equal and it may be occurred excessive voltage in a part of capacitor, which may lead to shortening lifetime and breakdown. Take a margin against a rated voltage or add a balancing resister. 9. PAS capacitor has the pressure release vent In case of inside pressure of capacitor excessively rising, the pressure release vent will be opened in order to release inner gas. Following clearance (Diameter< 18over 2mm, Diameter18over 3mm) should be made above the pressure release vent. Don't set up wiring or a pattern in the upper part of the pressure release vent, so that the high temperature gas is gushed when the pressure release vent open. The product which open the pressure release vent can not use. 10. The sleeve of the PAS capacitor is not guaranteed insulation Short circuit might happen if circuit pattern is set underneath of PAS capacitor or it fixed by a metal or it contact with other component. 11. Environmental of usage In case PAS capacitor is used in the high humidity, alkaline or acid air, it may cause deterioration of its performance, electrolyte leak and short circuit by corrosion of outer can or lead terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak by dew condensation. 12. Don't apply shock and vibration or pressure PAS capacitor is sensitive to shock. Don't drop PAS capacitor and not apply strong pressure to a body, terminals and lead. Soldering part or lead terminal might be damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed. 13. Soldering If next each item is not minded, it may cause deteriorating of its performance, leakage, shortening lifetime. Don't contact solder iron to a cell body. Don't solder over solder conditions in the spec sheet. 14. Cleaning condition when cleaning circuit-board after soldering Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand. Some cleaning conditions cause detrimental influence. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_cylinder_prec_e-01 15. Storage Keep following cautions for storage of PAS capacitor. Don't store in the high temperature, the high humidity condition and a place where receiving direct sunlight. Storing PAS capacitor in the room condition of 10 - 35 and less than 65% relative humidity is recommended. Sudden temperature change or high humidity may cause deteriorating of its characteristics and Soldering. Don't store PAS capacitor near water, salt water or oil, and it the dew condensation, gasified oil or salinity filled place. Don't store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine , ammonia, bromine, methyl bromine and etc). Don't fumigate by halogen fumigant. Don't store PAS capacitor near acid or alkaline solvent. Don't store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray. Don't store PAS capacitor in a place where vibration and shock might occur in. 16. Disposal Dispose PAS capacitor in accordance with local and country rules and regulations. 17. Usage PAS capacitor is developed on the assumption of the memory-backup & RTC for usage of information & communication equipment, home electronics, audio & visual equipment, office equipment and etc. Consult us about using high reliability and safety required products such as medical equipment, transportation equipment, industrial equipment, flight / space equipment and emergency equipment. 18. Other Notice Don't heat or throw PAS capacitor into fire. Don't short. Don't solder directly to a cell body. Don't open a body Don't deform. Don't apply pressure. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_cylinder_prec_e-01