VS-10BQ015PbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 1.0 A FEATURES * Ultralow forward voltage drop * Optimized for OR-ing applications Cathode * Guard ring for enhanced ruggedness and long term reliability Anode * 125 C TJ operation (VR < 5 V) * High frequency operation SMB * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C PRODUCT SUMMARY Package SMB (DO-214AA) IF(AV) 1A VR 15 V VF at IF 0.32 V * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION IRM 12 mA at 100 C TJ max. 125 C Diode variation Single die EAS 1 mJ The VS-10BQ015PbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. The proprietary barrier technology allows for reliable operation up to 125 C junction temperature. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL VALUES UNITS Rectangular waveform 1.0 A 15 V IFSM tp = 5 s sine 140 A VF 1.0 Apk, TJ = 125 C TJ Range IF(AV) CHARACTERISTICS VRRM 0.32 V -55 to +125 C SYMBOL VS-10BQ015PbF UNITS VR 15 VRWM 25 VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 1 A, L = 2 mH 1.0 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A 50 % duty cycle at TL = 84 C, rectangular waveform 1.0 5 s sine or 3 s rect. pulse 140 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied A 40 Revision: 28-Aug-14 Document Number: 94110 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ015PbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 1A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 C 2A 1A TJ = 125 C 2A Maximum reverse leakage current See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Typical junction capacitance CT Typical series inductance LS Maximum voltage rate of change dV/dt TJ = 25 C VR = Rated VR TJ = 100 C TJ = TJ maximum VR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 C Measured lead to lead 5 mm from package body Rated VR VALUES UNITS 0.35 0.44 V 0.32 0.40 0.5 mA 12 - V - m 390 pF 2.0 nH 10 000 V/s VALUES UNITS Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction temperature range TJ (1) -55 to +125 Maximum storage temperature range TStg -55 to +150 Maximum thermal resistance, junction to lead RthJL (2) DC operation See fig. 4 36 Maximum thermal resistance, junction to ambient RthJA DC operation 80 Approximate weight Marking device Case style SMB (similar to DO-214AA) C C/W 0.10 g 0.003 oz. 1C Notes (1) (2) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB Revision: 28-Aug-14 Document Number: 94110 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ015PbF Vishay Semiconductors 10 10 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com TJ = 100 C TJ = 75 C TJ = 25 C 1 0.1 TJ = 100 C 1 TJ = 75 C TJ = 50 C 0.1 TJ = 25 C 0.01 0 0.2 0.4 0.6 0.8 1.0 0 VFM - Forward Voltage Drop (V) 94110_01 3 9 12 15 VR - Reverse Voltage (V) 94110_02 Fig. 1 - Maximum Forward Voltage Drop Characteristics 6 Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 10 0 3 6 12 9 15 VR - Reverse Voltage (V) 94110_03 ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 1 Single pulse (thermal resistance) 0.1 0.00001 94110_04 0.0001 0.001 0.01 0.1 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 1 10 . 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Revision: 28-Aug-14 Document Number: 94110 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ015PbF Vishay Semiconductors 0.5 100 80 Average Power Loss (W) Allowable Case Temperature (C) www.vishay.com DC Square wave (D = 0.50) 80 % rated VR applied 60 0.4 0.3 RMS limit 0.2 DC 0.1 See note (1) 0 40 0 94110_05 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0.3 0.6 0.9 1.2 0 1.5 IF(AV) - Average Forward Current (A) 94110_06 IFSM - Non-Repetitive Surge Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 0.3 0.6 0.9 1.2 1.5 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics 1000 At any rated load condition and with rated VRRM applied following surge 100 94110_07 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 28-Aug-14 Document Number: 94110 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ015PbF www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 10 B Q 015 TR PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating 3 - B = single lead diode 4 - Q = Schottky "Q" series 5 - Voltage rating (015 = 15 V) 6 - TR = tape and reel) 7 - PbF = lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-10BQ015TRPbF PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 5BT 3200 13" diameter plastic tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95401 Part marking information www.vishay.com/doc?95403 Packaging information www.vishay.com/doc?95404 SPICE model www.vishay.com/doc?95355 Revision: 28-Aug-14 Document Number: 94110 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay High Power Products SMB DIMENSIONS in millimeters (inches) 2.15 (0.085) 1.80 (0.071) 3.80 (0.150) 3.30 (0.130) 1 2 1 Polarity 4.70 (0.185) 4.10 (0.161) 2.5 TYP. (0.098 TYP.) 2 Part Number Soldering pad 2.40 (0.094) 1.90 (0.075) 1.30 (0.051) 0.76 (0.030) 5.60 (0.220) 5.00 (0.197) 0.30 (0.012) 0.15 (0.006) 2.0 TYP. (0.079 TYP.) 4.2 (0.165) 4.0 (0.157) Document Number: 95017 Revision: 25-Jun-07 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-10BQ015PBF VS-10BQ015TRPBF