Product data sheet Characteristics ZB4BW14 red projecting illuminated pushbutton head O22 spring return for BA9s bulb Range of product Harmony XB4 Product or component type Head for illuminated pushbutton Device short name ZB4 Product compatibility BA 9s Bezel material Chromium plated metal Mounting diameter 22 mm Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator Spring return Operator profile Red projecting unmarked Operator additional information With plain lens Complementary CAD overall width 29 mm CAD overall height 29 mm CAD overall depth 32 mm Product weight 0.028 kg Resistance to high pressure washer 7000000 Pa at 55 C,distance: 0.1 m Mechanical durability 5000000 cycles Electrical composition code M9 for <= 2 contacts using single blocks in front mounting with BA 9s and transformer M8 for <= 6 contacts using single and double blocks in front mounting with BA 9s M7 for <= 6 contacts using single blocks in front mounting with BA 9s Environment Protective treatment TH Ambient air temperature for storage -40...70 C Ambient air temperature for operation -25...70 C Class of protection against electric shock Class I conforming to IEC 60536 IP degree of protection IP66 conforming to IEC 60529 NEMA degree of protection NEMA 4X NEMA 13 IK degree of protection IK05 conforming to EN 50102 Standards EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-4 EN/IEC 60947-5-5 JIS C 4520 UL 508 CSA C22.2 No 14 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) RINA UL listed Mar 10, 2015 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Main Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 Shock resistance 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27 2 Product data sheet Dimensions Drawings ZB4BW14 Dimensions 3 Product data sheet Mounting and Clearance ZB4BW14 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) (4) (5) (6) Connection by Faston Connectors Diameter on finished panel or support 40 mm min. / 1.57 in. min. 30 mm min. / 1.18 in. min. +0.4 +0.016 O 22.5 mm / 0.89 in. recommended (O 22.3 mm 0 / 0.88 in. 0 ) 45 mm min. / 1.78 in. min. 32 mm min. / 1.26 in. min. Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30 mm min. / 1.18 in. min. 40 mm min. / 1.57 in. min. 4 Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30 mm min. 40 mm min. Dimensions in in. A: B: 1.18 in. min. 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max. Installation Precautions Minimum thickness of circuit board: 1.6 mm / 0.06 in. Cut-out diameter: 22.4 mm 0.1 / 0.88 in. 0.004 Orientation of body/fixing collar ZB4 BZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max. Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws: every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y). with each selector switch head (ZB4 BD*, ZB4 BJ*, ZB4 BG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. 5 (1) (2) Panel Printed circuit board Mounting of Adapter (Socket) ZBZ 01* 1 2 elongated holes for ZBZ 006 screw access 2 1 hole O 2.4 mm 0.05 / 0.09 in. 0.002 for centring adapter ZBZ 01* 3 8 x O 1.2 mm / 0.05 in. holes 4 1 hole O 2.9 mm 0.05 / 0.11 in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01* Dimensions An + 18.1 relate to the O 2.4 mm 0.05 / 0.09 in. 0.002 holes for centring adapter ZBZ 01*. 6 Product data sheet Technical Description ZB4BW14 Electrical Composition Corresponding to Codes M1 and M7 Electrical Composition Corresponding to Codes M2 and M8 Electrical Composition Corresponding to Code M9 Legend Single contact Double contact 7 Light block Possible location 8