SMD Aluminum Electrolytic Capacitors CVL Features 4 ~ 10, 105, 3000 hours assured. Long life assured. Designed for surface mounting on high density PC board. RoHS Compliance SPECIFICATIONS Items Operating Temperature Range Capacitance Tolerance Performance -40 ~ +105 20% Leakage Current (at 20) Dissipation Factor (Tanat 120Hz, 20) Rated Voltage Tan(max) 6.3 0.30 10 0.24 16 0.20 35 0.13 50 0.12 35 2 3 50 2 3 Test Time 3,000 Hrs Capacitance Change Within 30% of initial value Dissipation Factor Less than 300% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20after the rated voltage applied for 3,000 hrs at 105. Load Life Test Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test. Freq.(Hz) Ripple Current & Frequency Multipliers V.DC(V) 6.350 Other Standards 50 120 1K 10K up 0.70 1.00 1.36 1.50 JIS C 5101-1, -18 DIAGRAM OF DIMENSIONS LEAD SPACING AND DIAMETER D 4 5 6.3 6.3 8 10 L 5.70.3 5.70.3 5.70.3 7.70.3 100.5 100.5 Contents 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 6.3V (0J) DxL mA 4x5.7 5x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 22 35 38 69 120 290 320 410 10V (1A) DxL mA 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 30 35 50 81 141 290 320 A 4.3 5.3 6.6 6.6 8.4 10.4 B 4.3 5.3 6.6 6.6 8.4 10.4 C 2.0 2.3 2.7 2.7 3.0 3.3 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 Unit: mm P0.2 1.0 1.5 2.0 2.0 3.1 4.7 Dimension: D x L(mm) Ripple Current: mA/rms at 120 Hz, 105C DIMENSION & PERMISSIBLE RIPPLE CURRENT 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 25 0.16 Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 Impedance Z(-25)/Z(+20) 4 3 2 2 Z(-40)/Z(+20) 10 7 5 3 Ratio Low Temperature Characteristics (at 120Hz) F (at 120Hz, 20) I = 0.01CV or 3 (A) whichever is greater (after 2 minutes) Where, C= rated capacitance in F. V = rated DC working voltage in V. 16V (1C) DxL mA 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 18 30 48 50 81 141 290 320 25V (1E) DxL mA 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 27 44 50 63 141 290 320 35V (1V) DxL mA 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 16 27 44 57 141 290 320 50V (1H) DxL mA 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 1 2.6 3.2 5 8 12 17 22 32 58 130 141 310