SMD Aluminum Electrolytic Capacitors CVL
Features
U
‧
4 ~ 10φ, 105℃, 3000 hours assured.
‧
Long life assured.
‧
Designed for surface mounting on high density PC board.
‧
RoHS Compliance
SPECIFICATIONS
Items Performance
Operating Temperature Range -40℃ ~ +105℃
Capacitance Tolerance ±20% (at 120Hz, 20℃)
Leakage Current (at 20℃) I = 0.01CV or 3 (μA) whichever is greater (after 2 minutes)
Where, C= rated capacitance in μF. V = rated DC working voltage in V.
Rated Voltage 6.3 10 16 25 35 50
Tanδ(max) 0.30 0.24 0.20 0.16 0.13 0.12
Dissipation Factor
(Tanδat 120Hz, 20℃)
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50
Z(-25℃)/Z(+20℃) 4 3 2 2 2 2
Impedance
Ratio Z(-40℃)/Z(+20℃)10 7 5 3 3 3
Low Temperature
Characteristics (at 120Hz)
Test T ime 3,000 Hrs
Capacitance Change Within ±30% of initial value
Dissipation Facto
r
Less than 300% of specified value
Leakage Current Within specified value
Load Life Test
* The above specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage
applied for 3,000 hrs at 105℃.
Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test.
Freq.(Hz)
V.DC(V) 50 120 1K 10K up
6.3～50 0.70 1.00 1.36 1.50
Ripple Current &
Frequency Multipliers
Other Standards JIS C 5101-1, -18
DIAGRAM OF DIMENSIONS LEAD SPACING AND DIAMETER Unit: mm
φD L A B C W P±0.2
4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0
5 5.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5
6.3 5.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0
6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0
8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1
10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4. 7
DIMENSION & PERMISSIBLE RIPPLE CURRENT
Dimension: φD × L(mm)
Ripple Current: mA/rms at 120 Hz, 105°C
6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H)
μF Contents φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA
0.1 0R1 4×5.7 1
0.22 R22 4×5.7 2.6
0.33 R33 4×5.7 3.2
0.47 R47 4×5.7 5
1 010 4×5.7 8
2.2 2R2 4×5.7 12
3.3 3R3 4×5.7 17
4.7 4R7 4×5.7 16 5×5.7 22
10 100 4×5.7 18 5×5.7 27 5×5.7 27 6.3×5.7 32
22 220 4×5.7 22 4×5.7 30 5×5.7 30 6.3×5.7 44 6.3×5.7 44 6.3×7.7 58
33 330 5×5.7 35 5×5.7 35 6.3×5.7 48 6.3×5.7 50 6.3×7.7 57 8×10 130
47 470 5×5.7 38 6.3×5.7 50 6.3×5.7 50 6.3×7.7 63 8×10 141 8×10 141
100 101 6.3×5.7 69 6.3×7.7 81 6.3×7.7 81 8×10 141 10×10 290 10×10 310
220 221 6.3×7.7 120 8×10 141 8×10 141 10×10 290 10×10 320
330 331 8×10 290 10×10 290 10×10 290 10×10 320
470 471 10×10 320 10×10 320 10×10 320
1,000 102 10×10 410
