T1620W, T1630W SnubberlessTM 16A Triacs Features IT(RMS) = 16 A VDRM / VRRM = 600, 700 and 800 V IGT = 20 to 30 mA A2 G A1 Description A1 A2 Based on ST's Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). G ISOWATT220AB TM: Snubberless is a trademark of STMicroelectronics October 2011 Doc ID 3759 Rev 1 1/8 www.st.com 8 Characteristics T1620W, T1630W 1 Characteristics Table 1. Absolute maximum ratings Symbol IT(RMS) ITSM I t dI/dt Parameter On-state rms current (full sine wave) PG(AV) Tstg Tj Table 2. Unit Tc = 80 C 16 A Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) F = 50 Hz t = 20 ms 200 F = 60 Hz t = 16.7 ms 218 It Value for fusing tp = 10 ms A 220 As Tj = 125 C 50 A/s tp = 10 ms Tj = 25 C VDRM/VRRM + 100 V tp = 20 s Tj = 125 C 4 A Tj = 125 C 1 W - 40 to + 150 - 40 to + 125 C Critical rate of rise of on-state current IG = 2 x IGT , tr F = 120 Hz 100 ns VDSM/V Non repetitive surge peak off-state voltage RSM IGM Value Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range Electrical characteristics (Tj = 25 C, unless otherwise specified) Value Symbol IGT (1) VGT VGD IH (2) Test conditions Quadrant VD = 12 V RL = 30 VD = VDRM, RL = 3.3 k, Tj = 125 C Unit (2) MAX. 1.3 V I - II - III MIN. 0.2 V MAX. 50 70 80 80 100 MIN. 300 500 V/s MIN. 8.5 11 A/ms II Without snubber, Tj = 125 C Doc ID 3759 Rev 1 mA 35 MAX. 1. minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1. 2/8 30 I - II - III dV/dt (2) VD = 67% VDRM, gate open, Tj = 125 C (dI/dt)c 20 MAX. IT = 250 mA IG = 1.2 IGT T1630 I - II - III I - III IL T1620 mA mA T1620W, T1630W Table 3. Characteristics Static characteristics Symbol VT (1) Test conditions Value Unit ITM = 22.5 A, tp = 380 s Tj = 25 C MAX. 1.4 V VTO (1) Threshold voltage Tj = 125 C MAX. 0.85 V RD (1) Dynamic resistance Tj = 125 C MAX. 250 m 5 A 1 mA Value Unit IDRM IRRM Tj = 25 C VDRM = VRRM MAX. Tj = 125 C 1. for both polarities of A2 referenced to A1. Table 4. Thermal resistance Symbol Parameter Rth(j-c) Junction to case (AC) (360 conduction angle) 3.1 C/W Rth(j-a) Junction to ambient 60 C/W Figure 1. Maximum power dissipation versus Figure 2. on-state rms current P(W) On-state rms current versus case temperature IT(RMS)(A) 18 18 =180 16 16 14 14 12 12 10 10 8 8 =180 6 6 180 4 4 2 2 IT(RMS)(A) 0 2 Figure 3. 4 6 8 TC(C) 0 0 10 12 14 16 Relative variation of thermal impedance versus pulse duration 0 25 Figure 4. 50 75 100 125 On-state characteristics (maximum values) ITM(A) K=[Zth/Rth] 100 1.E+00 Tj max. Vt0 = 0.85V Rd = 20 m Zth(j-c) 1.E-01 Tj = Tj max. Zth(j-a) 10 1.E-02 Tj = 25C tp(s) VTM(V) 1.E-03 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1 0.0 Doc ID 3759 Rev 1 0.5 1.0 1.5 2.0 2.5 3.0 3/8 Characteristics Figure 5. T1620W, T1630W Surge peak on-state current versus Figure 6. number of cycles Non-repetitive surge peak on-state current for a sinusoidal ITSM(A), I2t (A2s) ITSM(A) 10000 220 Tj initial=25C 200 180 t=20ms 160 pulse with width t <10 ms, and corresponding value of It One cycle 140 Non repetitive Tj initial=25C 120 1000 100 80 dI/dt limitation: 50A/s ITSM Repetitive TC=80C 60 I2t 40 20 Number of cycles tp(ms) 0 100 1 Figure 7. 10 100 1000 Relative variation of IGT,IH, IL vs junction temperature (typical values) 0.01 Figure 8. 0.10 1.00 10.00 Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C] 2.0 3.0 1.8 2.5 1.6 1.4 2.0 1.2 IGT 1.5 1.0 0.8 IH & IL 1.0 0.6 0.4 0.5 0.2 Tj(C) (dV/dt) (V/s) 0.0 0.0 -40 -30 -20 -10 Figure 9. 0 10 20 30 40 50 60 70 80 0.1 90 100 110 120 130 1.0 10.0 Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [Tj] / (dI/dt)c [Tj = 125C] 8 7 6 5 4 3 2 1 Tj(C) 0 0 4/8 25 50 75 Doc ID 3759 Rev 1 100 125 100.0 T1620W, T1630W 2 Ordering information scheme Ordering information scheme Figure 10. Ordering information scheme T 16 20 - 600 W Triac series Current 16 = 16 A Sensitivity 20 = 20 mA 30 = 30 mA Voltage 600 = 600 V 700 = 700 V 800 = 800 V Package W = ISOWATT220AB Table 5. Product Selector Voltage (xxx) Part Numbers Sensitivity 600 V T1620-600W 700 V Type Package 800 V X T1620-700W X 20 mA Snubberless ISOWATT220AB T1620-800W T1630-600W X X 30 mA Doc ID 3759 Rev 1 5/8 Package mechanical data 3 T1620W, T1630W Package mechanical data Epoxy meets UL94, V0 Recommended torque 0.4 to 0.6 N*m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. ISOWATT220AB dimensions Dimensions Ref. A B H Dia L6 L2 L7 L3 F2 F1 D L4 F E Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 B 2.50 2.70 0.098 0.106 D 2.50 2.75 0.098 0.108 E 0.40 0.70 0.016 0.028 F 0.75 1.00 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.40 2.70 0.094 0.106 H 10.00 10.40 0.394 0.409 L2 16.00 typ. 0.630 typ. G1 G 6/8 Doc ID 3759 Rev 1 L3 28.60 30.60 1.125 1.205 L4 9.80 10.60 0.386 0.417 L6 15.90 16.40 0.626 0.646 L7 9.00 9.30 0.354 0.366 Diam 3.00 3.20 0.118 0.126 T1620W, T1630W 4 Ordering Information Table 7. 5 Ordering Information Ordering information Order code Marking T1620-600W T1620600W T1620-700W T1620700W T1620-800W T1620800W T1630-600W T1630600W Package Weight Base qty Delivery mode ISOWATT220AB 2.3 g 50 Tube Revision history Table 8. Document revision history Date Revision Changes Mar-2004 2 Last update. 18-Oct-2011 3 Insert T1620-700W, Insert 700 V in fig.10,deleted T1630-800W. Doc ID 3759 Rev 1 7/8 T1620W, T1630W Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 3759 Rev 1