31
MICRO SWITCH ™ sealed and stanard rocker
switches: Wide range of electrical and display design.
Many shapes, sizes, buttons, and configurations
to enhance manual operation. May be used in:
Transportation, agricultural and construction
equipment, test equipment, heavy-duty machinery,
marine equipment, small appliances, telecom, medical
instrumentation, and commercial aviation.
MICRO SWITCH™ toggle switches: Hermetic and
environmentally sealed options. Enhanced reliability.
Center pin for ultimate stabilization Available in many
shapes, sizes, and configurations. May be used in:
Aerial lifts, construction equipment, agriculture and
material-handling equipment, factory-floor controls,
process control, medical instrumentation, test
instruments, and military/commercial aviation.
MICRO SWITCH™ aerospace-grade pressure
switches: lightweight, compact pressure switches.
Meets military and DO-160 standards. Lower operating
force provides application versatility with enhanced
precision. Design modularity allows for configuration
of the switch, facilitating rapid customization. May be
used in: aerospace systems: engines, fuel pressure,
and hydraulic systems, military ground vehicles,
ordnance and munitions release systems, military
maritime systems.
Pressure and vacuum switches: Feature set points
from 0.5 psi to 3000 psi. Rugged components have
enhanced repeatability, flexibility, and wide media
capability. Uses diaphragm or quad seal/piston. May be
used in: Transmissions, hydraulics, brakes, steering,
generators/compressors, dental air, embalming
equipment, oxygen concentrators, air cleaners, fuel
filters, and pool water pressure.
Limitless™ switches and receivers: Combines
the best of MICRO SWITCH™ limit switches with
commercial wireless technology. Beneficial for remote
monitoring where wiring/maintenance is not physically
possible or economically feasible. Used for position
sensing and presence/absence detection. Limitless™
Operator Interface: Adds a human interface device to
the product-driven interfaces of Limitless™ switches
and receivers. Choose and install a desired operator or
utilize one of Honeywell’s pushbuttons. May be used
in: valve position, crane boom/jib/skew position, lifts,
material handling, presses, construction/ag machines,
conveyors, industrial environments, remote/temporary
equipment, grain diverters or flaps, and door position.
MICRO SWITCH™ safety switches: For operator point-
of-operation protection, access detection, presence
sensing, gate monitoring, and electrical interfacing.
High-quality, dependable, cost-effective solutions. May
be used in: Packaging and semi-conductor equipment,
plastic-molding machinery, machine tools, textile
machines, lifts, industrial doors, bailers, compactors,
aircraft bridges, telescopic handlers, refuse vehicles.
Temperature sensors: Customized probes,
thermistors, and RTD sensors. Plastic/ceramic,
miniaturized, surface-mount housings, and printed
circuit board terminations. May be used in: Semi-
conductor protection, vending machines, power
generation, hydraulic systems, thermal management,
and temperature compensation.
Thermostats: Commercial and precision snap-action.
Automatic or manual reset options, phenolic or ceramic
housings. May be used in: Telecommunications,
battery heater controls, computers, copy machines, fax
machines, food service, food carts, small and major
appliances, heat and smoke detectors, and
HVAC equipment.
MICRO SWITCH™ basic switches: Snap-action
precision switches. Compact. Lightweight. Designed
for repeatability and enhanced life. Basic switches:
large, standard, miniature, subminiature, hermetically
sealed, water-tight, and high-temperature versions.
May be used in: Vending machines, communication
equipment, HVAC, appliances, automotive, electronic
gaming machinery, valve controls, irrigation systems,
foot switches, pressure, and temperature controls.
MICRO SWITCH™ hazardous area switches:
Flame path designed to contain and cool escaping
hot gases that could cause an explosion. MICRO
SWITCH™ EX, BX, CX, and LSX Series. May be used
in: Grain elevators and conveyors, off-shore drilling,
petrochemical, waste-treatment plants, control valves,
paint booths, and hazardous waste handling facilities.
Key and rotary switches: Environmentally sealed,
2-3-4 position switches. O-rings help keep dirt and
moisture out and prolong life. May be used in: All-
terrain vehicles, golf carts, snowmobiles, scissor lifts,
telehandlers, construction and marine equipment, skid
loaders, agricultural equipment, material handlers.
MICRO SWITCH ™ limit switches: Broadest and
deepest limit switch portfolio. Rugged, dependable
position detection solutions. MICRO SWITCH™
heavy-duty limit switches (HDLS). medium-duty, and
global limit switches. Hermetically and environmentally
sealed switches. May be used in: Machine tools,
woodworking, textile, and printing machinery, metal
fabrication, balers/compactors, forklifts, bridges,
robotics, wind turbines, elevators, moving stairs, doors,
dock locks/levelers, aerial lifts, cranes, conveyors, rail,
shipboards, and dock side.
MICRO SWITCH™ sealed and high accuracy
switches: Precision ‘snap action’ mechanisms.
Wide variety of actuators, terminations, circuitry
configurations, electrical ratings, contact materials, and
operating characteristics. May be used in: Landing
gear, flap/stabilizer controls, thrust reversers, space
vehicles, armored personnel carriers, de-icer controls,
wingfold actuators, industrial environments, valves,
and underwater.
MICRO SWITCH™ pushbutton switches: Lit or
unlit. Wide range of electrical and display design,
pushbuttons, and manual switches. Many shapes,
sizes, and configurations. Easy to apply, operate, and
maintain. May be used in: Control boards and panels,
industrial and test equipment, flight decks, medical
instrumentation, and process control.
SAFETY PRODUCTS
ELECTROMECHANICAL SWITCHES
LIMITLESS™ WIRELESS SOLUTIONS