www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010
130 Revision: 25-Jul-08
RCWPM (Military M/D55342)
Vishay Dale
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
FEATURES
•Fully conforms to the requirements of MIL-PRF-55342
•Established reliability - Verified failure rate; M, P, R, S and
T levels
•Operating temperature range is - 55 °C to + 150 °C
•100 % Group A screening per MIL-PRF-55342
•Termination Style B - Tin/Lead wraparound over nickel
barrier
•For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s
RCWPM Jumper (Military M32159) data sheet
Note
• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on these drawing as
follows:
These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL SPEC.
SHEET TERM. POWER RATING
P70 °C W
MAX. OPERATING
VOLTAGE CHAR. TOLERANCE
%
RESISTANCE
RANGE Ω
RCWPM-0502 RM0502 01 B 0.05 40 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-550 RM0505 02 B 0.125 40 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-5100 RM1005 03 B 0.20 75 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-5150 RM1505 04 B 0.15 125 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-7225 RM2208 05 B 0.225 175 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-575 RM0705 06 B 0.15 50 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-1206 RM1206 07 B 0.25 100 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-2010 RM2010 08 B 0.80 150 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-2512 RM2512 09 B 1.0 200 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-1100 RM1010 10 B 0.50 75 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-0402 RM0402 11 B 0.05 30 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-0603 RM0603 12 B 0.10 50 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-0302 RM0302 13 B 0.04 15 M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
DSCC DRAWING
NUMBER
VISHAY DALE
MODEL TERM. POWER RATING
P70 °C W
RES. RANGE
Ω
RES. TOL.
%
TEMP. COEF.
ppm/°C
MAX. WORKING
VOLTAGE
07009 RCWP-0201 B 0.05 47 to 1M
10 to 1M ± 1; ± 5 100
200 30
07010 RCWP-0201 B 0.05 47 to 1M
10 to 1M ± 1; ± 5 100
300 30
Document Number: 31010 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 25-Jul-08 131
RCWPM (Military M/D55342)
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)
MIL
STYLE CHARACTERISTICS SPEC
SHEET TERMINATION
STYLE VALUE AND
TOLERANCE FAILURE
RATE PACKAGING SPECIAL
D55342
applies to
Style 07
(RM1206)
only.
M55342
applies to
all other
styles.
K
= 100 ppm
M
= 300 ppm
(see Standard
Electrical
Specifications
table)
B
= Pre-tinned
Nickel Barrier,
wraparound
(see Tolerance
and Multipliers
table)
C
= Non-ER
M
= 1.0 %/1000 h
P
= 0.1 %/1000 h
R
= 0.01 %/1000 h
S
= 0.001 %/1000 h
T
= Space Level
TP
= Tin/Lead,
T/R (Full)
UL
= Tin/Lead, T/R
Single Lot Date Code
S3
= Tin/Lead,
T/R (1000 pieces)
WB
= Tin/Lead, Tray
WL
= Tin/Lead, Tray,
Single Lot Date Code
S2
= Tin/Lead,
T/R (500 pieces)
S6
= Tin/Lead,
T/R (300 pieces)
Blank = Standard
(Dash Number)
(up to 1 digits)
T
= Space
Level (-98)
Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)
M55342 M 02 B 10E0 R WB
MIL
STYLE CHARACTERISTICS SPEC SHEET TERMINATION
STYLE
VALUE AND
TOLERANCE
FAILURE
RATE
PAC K A G I N G
CODE
RESISTANCE TOLERANCE AND MULTIPLIERS
TOLERANCE
MULTIPLIER VALUE
RANGE (
Ω
)
± 1 % ± 2 % ± 5 % ± 10 %
DG J M 1 1 - 9xx
E H K N 1000 1K - 9xxK
F T L P 1 000 000 1M - 22M
Examples: 11D3 = 11.3 Ω ± 1 %
10E0 = 10 kΩ ± 1 %
332D = 332 Ω ± 1 %
2F21 = 2.21 MΩ ± 1 %
51G0 = 51 Ω ± 2 %
10H0 = 10 kΩ ± 2 %
33H0 = 33 kΩ ± 2 %
22T0 = 22 MΩ ± 2 %
15J0 = 15 Ω ± 5 %
10K0 = 10 kΩ ± 5 %
560K = 560 kΩ ± 5 %
8L20 = 8.2 MΩ ± 5 %
10M0 = 10 Ω ± 10 %
10N0 = 10 kΩ ± 10 %
2P70 = 2.7 MΩ ± 10 %
8P20 = 8.2 MΩ ± 10 %
55342M02MB10E0R W B
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010
132 Revision: 25-Jul-08
RCWPM (Military M/D55342)
Vishay Dale Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
DIMENSIONS in inches [millimeters]
D
C
AE
B
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL.
SPEC.
SHEET
A
(Length)
B
(Width)
C
(Height)
D
(Top Term)
E
(Bottom Term)
RCWPM-0502 RM0502 01 0.055 ± 0.005
[1.40 ± 0.13]
0.023 ± 0.003
[0.58 ± 0.08]
0.015 ± 0.003
[0.38 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-550 RM0505 02 0.055 ± 0.005
[1.40 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5100 RM1005 03 0.105 ± 0.005
[2.67 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5150 RM1505 04 0.155 ± 0.005
[3.94 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-7225 RM2208 05 0.230 ± 0.005
[5.84 ± 0.13]
0.075 ± 0.005
[1.91 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-575 RM0705 06 0.080 ± 0.005
[2.03 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-1206 RM1206 07 0.125 ± 0.005
[3.18 ± 0.13]
0.063 ± 0.005
[1.60 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-2010 RM2010 08 0.197 ± 0.006
[5.00 ± 0.15]
0.098 ± 0.005
[2.49 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-2512 RM2512 09 0.250 ± 0.006
[6.35 ± 0.15]
0.124 ± 0.005
[3.15 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-1100 RM1010 10 0.105 ± 0.005
[2.67 ± 0.13]
0.100 ± 0.005
[2.54 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-0402 RM0402 11 0.039 ± 0.003
[0.99 ± 0.08]
0.020 ± 0.003
[0.51 ± 0.08]
0.013 ± 0.003
[0.33 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
RCWPM-0603 RM0603 12 0.063 ± 0.005
[1.60 ± 0.13]
0.032 ± 0.005
[0.81 ± 0.13]
0.018 ± 0.005
[0.46 ± 0.13]
0.012 ± 0.005
[0.31 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-0302 RM0302 13 0.034 ± 0.004
[0.86 ± 0.10]
0.021 ± 0.003
[0.53 ± 0.08]
0.015 ± 0.003
[0.38 ± 0.08]
0.007 ± 0.005
[0.18 ± 0.13]
0.008 ± 0.005
[0.20 ± 0.13]
RCWP-0201 0.024 ± 0.002
[0.60 ± 0.05]
0.012 ± 0.002
[0.30 ± 0.05]
0.009 ± 0.002
[0.23 ± 0.05]
0.006 ± 0.003
[0.15 ± 0.07]
0.006 + 0.002 - 0.004
[0.15 + 0.05 - 0.10]
Derating
- 55 - 25 75 100 125 150 175
120
100
80
60
40
20
0
Ambient Temperature in °C
70
Rated Power in %
05025
CAGE CODE: 91637 and SH903
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
