General Purpose Low Power PCB Relays SCHRACK Miniature PCB Relay EJ 0.24 0.35 0.2 0.8 PC Board Layouts 0.35 7 (Bottom View) 3 0.35 Wiring Diagram 0.24 Layouts 0.2 (Bottom View) PC Board 0.8 2 - 1.1 6.9 4.7 Approvals 20.4 VDE 40026866, UL E58304 0.35 11.5 Technical data of approved types on request. 4 3 0.35 Z 4 imension. Type Contact Load Cycles Tolerance 0.99mm max.IEC61810 0.1mm form A (NO) 5A,250VAC, cos=1, 85C 100x103 1 - 2.99mm EJ 0.2mm form A (NO) 2A,250VAC, cos=1, 85C 100x103 3mm min. EJ 0.3mm EJ * Refer form A (NO)table3A,250VAC, cos=1, 105C in the d 250x103 to below for any tolerance not specified imension. UL 508 Tolerance EJ form A (NO) 3A,277VAC, cos=1, 85C 50x103 4.7 6.9 4.7 Contact Data (Bottom View) Contact Data 2 - 1 (continued) * Refer to belowContact table for any tolerance not specified in the d ratings 11.5 7 7 15 1.1 Wiring Diagram 7 2 (unit : mm) 2-1 11.5 1 20.4 11.5 (Bottom View) 2 - 1.1 3.15 0.35 7 2 Typical applications Home appliances. 2-1 11.5 3.15 n 2 - 1.1 4.7 n (Bottom View) 1 n 1pole 3A/5A, 1 form A (NO) contact Sensitive coil 200mW Outline Dimensions (unit : mm) Ambient temperature 85C RoHS compliant (Directive 2002/95/EC) Coil UL class F (155) Insulation System 15 n PC Board Layouts 15 n (unit : mm) 4.7 Outline Dimensions 2 3.15 1.1 Contact arrangement 1 form A (NO) Rated voltage 250VAC Max. switching voltage 30VDC, 277VAC 0.99mm max. 0.1mm Rated current Wiring Diagram 3A/5A (Bottom View) 1 - 2.99mm 0.2mm Reference Data Mechanical endurance >5x106 operations Switching power 1,250VA, 150W 3mm min. 0.3mm 0.24Contact material AgNi 0.2 3 4 0.8contact 0.35load Min. recommended 100mA, 5VDC Initial contact resistance 100m at 1A, 6VDC Operate time Operate Time E x pectanwith/without cy L i-1f e E x pectancy Frequency Lofi f e operation, load 1800/18000h 3A Type 5A Type Operate/release time max. 10ms Reference Data 7Electrical endurance 250 VAC EJ00 (3A): 3A, 250VAC, resistive: 100x103 ops. 250 VAC EJ05 (5A): 5A, 250VAC, resistive: 100x103 ops Resistive Resistive Operate Time Electrical endurance L i f e E x pe*cRefer tancyto below L i f e E x pinecthe tandcy imension. table for any tolerance not specified 3A Type 5A Type Resistive 3mm min. 0.3mm % of Supplying Voltage to Coil 3A Type Coil Temperature Rise Contact Current (A) L i f e E x pectancy 5A Type Time (msec) 4 Operation % of Supplying Voltage to Coil (x10 ) Current (A) perature Rise Release Voltage Operating Voltage Range Hot Coil 3A & 5A Applied Ambient Temp. ( ) Contact Current Cool (A) Coil Hot Coil 0A Applied Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 003 3 2.25 005 5 3.75 006 6 4.50 009 9 6.75 012 12 9.00 018 18 13.50 024 24 18.00 Release voltage VDC 0.3 0.5 0.6 0.9 1.2 1.8 2.4 Coil resistance 10% 45 125 180 405 720 1620 2890 Rated coil power mW 200 200 200 200 200 200 200 All figures are given for coil without pre-energization, at ambient temperature +23C. Coil Power (% of Rated Voltage) Release Voltage Ambient Temp. ( and ) product specification according 04-2013, Rev. 0413 Catalog www.te.com to IEC 61810-1 and to be used only together (c) 2013 Tyco Electronics Corporation, with the `Definitions' section. a TE Connectivity Ltd. company. Voltage Range pplied Coil voltage range 3 to24VDC Coil insulation system according UL class 155 (F) Coil Power (% of Rated Voltage) Contact Current (A) Operate Time Cool Coil Coil Power (% of Rated Voltage) Coil Data Operating Voltage Range Hot Coil 0A Applied 250 VAC 250 VAC Hot Coil 3A & 5A Applied Resistive Coil Temperature Rise Resistive ctancy Contact Current (A) Contact Current (A) 250 VAC Resistive Time (msec) Operation (x10 4) Operation (x10 4) Tolerance 0.99mm max. 0.1mm 250 VAC 0.2mm 1 - 2.99mm Time (msec) Operation (x10 4) Operation (x10 4) 1 20.4 Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. Copyright 200 by Tyco Electronics EC K.K. All rights reserved. Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki , 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please ca ll local TYCO Electronics for the latest Version. 1 General Purpose (unit : mm) Low Power PCB Relays 7 4.7 (Bottom View) Bottom view on solder pins 0.2 0.8 3 0.35 4 2 SCHRACK 2-1 Coil Power (% of Rated Voltage) 15 0.24 0.35 (Bottom View) 11.5 Terminal Wiring assignment Diagram 3.15 Coil Temperature Rise Contact data (continued) Coil operative range 2 - 1.1 Miniature PCB Relay EJ (Continued) Contact Current (A) Contact Current (A) 0.35 Hot Coil 3A & 5A Applied Hot Coil 0A Applied Release Voltage Outline Dimensions 0.99mm max. 1 - 2.99mm PC Board Layouts (Bottom View) PCB layout 3mm min. 0.3mm (unit : mm) 2 - 1.1 2-1 Ambient Temp. ( ) 11.5 Reference Data 0.35 Ambient Temp. ( ) 0.99mm max. 1 - 2.99mm 3mm min. Wiring Diagram 3.15 0.2 0.8 0.35 2 L i f e E x pectancy 0.35 5A Type 11.5 Operate Time 20.4 7 6.9 4.7 250 VAC Resistive * Refer to below table for an 0.99mm max. 1 - 2.99mm 3mm min. Tolerance 0.1mm 0.2mm 0.3mm 0.24 0.35 Tolerance 0.1mm 0.2mm 0.3mm 1.1 Operation (x10 4) % of Supplying Voltage to Coil Operation (x10 4) 4 Coil Power in (%the of dRatedimension. Voltage) Contact Current (A) table for any tolerance not * Refer to below specified 1.1 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85C Coil Temperature Rise Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Operating Voltage Range Reference Data Vibration resistance (functional) 10 to 50Hz, 1.5mm double amplitude Shock resistance (functional) Hot Coil 3A & 5A Applied IEC 60068-2-27 (half sine) 98m/s2, 11ms Terminal type L i f e E x pePCB-THT ctancy Cool Coil Hot Coil 0A Applied 3A Type Weight4g Release Voltage Resistance to soldering heat THT IEC 60068-2-20 260C/5s 250 VAC box/1000 pcs. Packaging/unit Resistive 3 1 Contact Current (A) Time (msec) 0.8 View) (Bottom 250 VAC Resistive 2 3.15 Wiring Diagram Time (msec) 6.9 4.7 0.2 5A Type Copyright 200 by Tyco Electronics EC K.K. All rights reserved. Edition : 2/2008 REV. Outline Dimensions (unit : mm) PC Board Layouts TYCO Electronics EC K.K.Dimensions [3-5-8, Hisamoto Takatsu-ku Kawasaki , 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please ca ll local TYCO Electronics for the latest Version.2 - 1.1 Operate Time L i f e E x pectancy Operation (x10 4) Operation (x10 4) Initial dielectric strength between open contacts L i f e E x pe750V ctancyrms between contact and coil 4000Vrms 3A Type Initial surge withstand voltage 250 VAC between contact and coil 10000V 0.24 0.35 Resistive Initial insulation resistance 1000M Clearance/creepage between contact and coil >= 6.3mm standard type 20.4 reinforced type 0.35 >= 8.0mm 11.5 7 4.7 15 Insulation Data Other Data 7 4.7 imension. Tolerance 0.1mm 0.2mm 1 * Refer to below table for any tolerance not specified in the d Cool Coil 7 6.9 4.7 20.4 11.5 15 Operating Voltage Range 1 1.1 % of Supplying Voltage to Coil PC Board Layouts Time (msec) Outline Dimensions 250 VAC Resistive Operation (x10 4) Operation (x10 4) 250 VAC Resistive Coil Power (% of Rated Voltage) Contact Current (A) Contact Current (A) Reference Data Copyright 200 by Tyco Electronics EC K.K. All rights reserved. Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku , 213-8535, Japan, TEL: 81 44 844 L i f e E x peKawasaki ctancy L i f e8445] E x pectancy This document is subject to change, Please ca ll local3A TYCO Electronics for the latest Version. Type Operation (x10 4) % of Supplying Voltage to Coil Operating Voltage Range Hot Coil 3A & 5A Applied Hot Coil 0A Applied Cool Coil Release Voltage 250 VAC Resistive Contact Current (A) Contact Current (A) Ambient Temp. ( ) Coil Temperature Rise 04-2013, Rev. 0413 www.te.com (c) 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. of Supplying Voltage to Coil 2 Catalog and product data is subject to the Catalog product data, `Definitions' section, Operating Voltage Range terms of the disclaimer and all chapters of application notes and all specifications are Hot Coil 3A &at 5A Applied the `Definitions' section, available subject to change. http://relays.te.com/definitions Copyright 200 byTyco Electronics EC K.K. All rights reserved. Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki Cool, Coil 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please ca ll local TYCO Electronics for the latest Version. Hot Coil 0A Applied Release Voltage 5A Type 250 VAC Resistive Operation (x10 4) Coil Temperature Rise General Purpose Low Power PCB Relays OEG Miniature PCB Relay EJ (Continued) Product code structure Typical product code EJ 00 -1 A 4 -D 012 -F Type EJ Miniature PCB Relay EJ Version 00 3A 05 5A Poles 1 1 pole Contact arrangement A 1 form A (NO) contact Contact material 4 AgNi Coil version D DC standard 200mW Coil Coil code: please refer to coil versions table Sealing F Flux proof W Wash tight* Electrical feature Blank Standard R Reinforced insulation type without WG W WG Product in accordance with IEC 60335-1 (domestic appliances)* S Reinforced insulation type with WG *) Wash tight version and WG version on request. Product code Version Contact Cont.material Coil version Coil voltage Sealing Part number EJ00-1A4-D003-F 3A 1 form A (NO) AgNi 90/10 200mW 3VDC Flux proof 1649595-1 EJ00-1A4-D005-F 5VDC 1649595-2 EJ00-1A4-D006-F 6VDC 1649595-3 EJ00-1A4-D009-F 9VDC 1649595-4 EJ00-1A4-D012-F 12VDC 1649595-5 EJ00-1A4-D018-F 18VDC 1649595-6 EJ00-1A4-D024-F 24VDC 1649595-7 EJ05-1A4-D003-F 5A 3VDC 1649594-1 EJ05-1A4-D005-F 5VDC 1649594-2 EJ05-1A4-D006-F 6VDC 1649594-3 EJ05-1A4-D009-F 9VDC 1649594-4 EJ05-1A4-D012-F 12VDC 1649594-5 EJ05-1A4-D018-F 18VDC 1649594-6 EJ05-1A4-D024-F 24VDC 1649594-7 04-2013, Rev. 0413 www.te.com (c) 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 3