.215
5.50 MAX
Current 2 Secondary DCR (mW MAX)
Part 6,7 Turns Rating Inductance Primary Secondary Hipot
Number Ratio (A) (mH MIN) (8-7) (1-3) (VRMS)
P8202NL 1:20 10 0.08 6 550 500
P8203NL 1:30 10 0.18 6 870 500
P8204NL 1:40 10 0.32 6 1140 500
P8205NL 1:50 10 0.50 6 1500 500
P8206NL 1:60 10 0.72 6 2250 500
P8207NL 1:70 10 0.98 6 4750 500
P8208NL 1:100 10 2.00 6 5500 500
P8209NL 1:125 10 3.00 6 6500 500
SMT CURRENT SENSE
TRANSFORMERS
P820X Series
Weight ..............0.34 grams
Tray ..................120/tray
Tape & Reel ............900/reel
Coplanarity ........ 0.004 inches
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
NOTES:
1. The temperature of the component (ambient temperature plus
temperature rise) must be within the specified operating temperature range.
2.The maximum current rating is based upon temperature rise of the
component and represents the DC current which will cause a typical
temperature rise of 40°C with no airflow when both one turn windings
connected in parallel.
3. To calculate the value of the terminating resistor (Rt) use the following
formula: Rt (W) = Vref * N / (Ipeak_primary)
4. The peak flux density of the device must remain below 2000 Gauss. To
calculate the peak flux density for uni-polar current use following formula:
Bp k = 37.59 * Vr e f * (Duty_Cycle_Max) * 105 / ( N * Freq_kHz)
* for bi-polar current applications divide Bp k (as calculated above) by 2.
5. Part numbers P8222 to P8229 are reverse polarity versions of P820X.
6. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to
the part number (i.e. P8202NL becomes P8202NLT). Pulse complies to
industry standard tape and reel specification EIA481.
7.
The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed
parts are not necessarily RoHS compliant, but are electrically and mechanically
equivalent to NL versions. If a part number does not have the “NL” suffix, but
an RoHS compliant version is required, please contact Pulse for availability.
Mechanical Schematic





Height: 5.5mm Max
Footprint: 8.4mm x 7.2mm Max
Current Rating: up to 10A
Frequency Range: 50kHz to 1MHz
Lower Primary DCR version available: PA1005.XXX series
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 32181071 China 86 755 33966678 Taiwan 886 3 4643715
www.pulseelectronics.com 87 PC2005 (2/11)