Samtec® 20 Pin MECT Connector
PL-MECT-110-01-M-D-RA, PL-MECT-110-01-M-D-RA1-TR
Key Benefi ts • Compatible with all MSA compliant SFP transceivers and
PWB layouts
• Surface mount
• Double row
• Selective gold plating
• MSA compliance ensures interoperability, robust supply chain
• Single source for SFP transceivers, cages and connectors,
simplifying purchasing and inventory
The MECT 20 pin SFP connector represents one of JDSU’s accessory products for
the Small Form Factor Pluggable (SFP) transceivers. The Samtec connector complies
with the SFP multisource agreement (MSA) for use with all transceiver products.
Samtec is a high quality and reliable manufacturer of electrical connectors.
Applications
• Switch and hub devices
• Mass storage systems interconnect
• Host adapter cards
• Enterprise switch interconnects
NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com
COMMUNICATIONS MODULES & SUBSYSTEMS
NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com
Product specifi cations and descriptions in this document subject to change without notice. © 2007 JDS Uniphase Corporation 30149212 Rev. 000 12/07 PL-MECT-110-01-M-D-RA1.DS.CMS.AE December 2007
Samtec is a registered trademark of Samtec, Inc.
SAMTEC® 20 PIN MECT CONNECTOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: PL-MECT-110-01-M-D-RA1 Part Number Description
PL-MECT-110-01-M-D-RA1 Surface Mount 20 Pin Connector
PL-MECT-110-01-M-D-RA1-TR Surface Mount 20 Pin Connector Shipped Tape & Reel
The MECT-110-01-M-D-RA1 accommodates all MSA compliant SFP transceivers.
These reliable connectors complete JDSU’s SFP kit, which also includes the trans-
ceiver and OptoCage™
PL-MECT-110-01-M-D-RA1 Features
• Black LCP insulator material
• Phosphor bronze contact material
•-65°C to +125°C operating range
• Sn or Aμ over 100m” (2,54mm) Ni
plating
Processing
• 230°C for 60 seconds max processing
temperature
• SMT lead coplanarity
(0,10mm) .004” max (10-35)
(0,15mm) .006” max (40-50)
Suggested PCB Layouts
• For reference only. Please contact
Samtec or go to www.samtec.com/
standard_products/product_infor-
mation/pcb_footprints.asp
SFP Board Layout SFP Card Layout
