KDZVTR13B - ROHM Semiconductor

Data Sheet

www.rohm.com

Zener Diode

KDZV series

lApplication lDimensions (Unit : mm) lLand size figure (Unit : mm)

Voltage regulation

lFeatures

1) Small power mold type. (PMDU)

2) High ESD tolerance

lStructure

lConstruction

Silicon epitaxial planar

lTaping specifications (Unit : mm)

lAbsolute maximum ratings (Ta = 25°C)

Power dissipation P mW

Junction temperature

Tj°C

Storage temperature

Tstg °C

Unit

1000

150

-55 to +150

Parameter

Symbol

Limits

PMDU

Anode

Cathode

1.2

3.05

0.85

Manufacture Date

ROHM : PMDU

JEDEC : SOD-123

EX. KDZV10B

0.9±0.1

1.6±0.1

2.6±0.1

3.5±0.2

0.8±0.1

0.1±0.1

　　　 0.05

3.5±0.12

4.0±0.1

2.0±0.05

φ1.55±0.05

1.81±0.1

4.0±0.1

φ1.0±0.1

3.5±0.05

1.75±0.1

8.0±0.2

0.25±0.05

1.5MAX

3.71±0.1

1.55  0.05

1.0  0.1

3.71±0.08

1/6

2015.09 - Rev.J

www.rohm.com

Data Sheet

KDZV series

lElectrical characteristics (Ta= 25°C)

MIN. TYP. MAX.

IZ(mA) MAX. VR(V)

KDZV 3.6B 3.600 3.813 4.000 40.0 60.0 1.0

KDZV 3.9B 3.900 4.136 4.400 40.0 40.0 1.0

KDZV 4.3B 4.300 4.572 4.800 40.0 20.0 1.0

KDZV 4.7B 4.700 4.924 5.200 40.0 20.0 1.0

KDZV 5.1B 5.100 5.368 5.700 40.0 20.0 1.0

KDZV 5.6B 5.600 5.856 6.300 40.0 20.0 1.5

KDZV 6.2B 6.200 6.509 7.000 40.0 20.0 3.0

KDZV 6.8B 6.800 7.280 7.700 40.0 20.0 3.5

KDZV 7.5B 7.500 7.889 8.400 40.0 20.0 4.0

KDZV 8.2B 8.200 8.655 9.300 40.0 20.0 5.0

KDZV 9.1B 9.100 9.747 10.200 40.0 20.0 6.0

KDZV 10B 10.000 10.310 11.200 40.0 10.0 7.0

KDZV 11B 11.000 11.510 12.300 20.0 10.0 8.0

KDZV 12B 12.000 12.500 13.500 20.0 10.0 9.0

KDZV 13B 13.300 13.820 15.000 20.0 10.0 10.0

KDZV 15B 14.700 15.350 16.500 20.0 10.0 11.0

KDZV 16B 16.200 16.860 18.300 20.0 10.0 12.0

KDZV 18B 18.000 19.000 20.300 20.0 10.0 13.0

KDZV 20B 20.000 20.820 22.400 20.0 10.0 15.0

KDZV 22B 22.000 23.850 24.500 10.0 10.0 17.0

KDZV 24B 24.000 25.310 27.600 10.0 10.0 19.0

KDZV 27B 27.000 28.700 30.800 10.0 10.0 21.0

KDZV 30B 30.000 31.570 34.000 10.0 10.0 23.0

KDZV 33B 33.000 34.950 37.000 10.0 10.0 25.0

KDZV 36B 36.000 39.240 40.000 10.0 10.0 27.0

*The Zener voltage (Vz) is measured 40ms after power is supplied.

lMARKING (TYPE NO.)

TYP.

Reverse current

: IR(mA)

Zener voltage : VZ(V)

Symbol

TYPE

TYPE　NO. TYPE TYPE　NO.

KDZV　3.6B GB KDZV　12B VB

KDZV　3.9B HB KDZV　13B WB

KDZV　4.3B JB KDZV　15B XB

KDZV　4.7B KB KDZV　16B YB

KDZV　5.1B LB KDZV　18B ZB

KDZV　5.6B MB KDZV　20B AD

KDZV　6.2B NB KDZV　22B BD

KDZV　6.8B PB KDZV　24B CD

KDZV　7.5B QB KDZV　27B DD

KDZV　8.2B RB KDZV　30B ED

KDZV　9.1B SB KDZV　33B FD

KDZV　10B TB KDZV　36B GD

KDZV　11B UB 　

2/6

2015.09 - Rev.J

www.rohm.com

Data Sheet

KDZV series

lElectrical characteristic curves

ZENER CURRENT : IZ(mA)

ZENER VOLTAGE : VZ(V)

VZ -IZ CHARACTERISTICS

0.001

0.01

0.1

100

0 5 10 15 20 25 30 35 40 45

12 36

22 30

3.6

9.1

8.2

7.5

5.6

6.8

6.2

5.1

4.7

4.3

3.9

3/6

2015.09 - Rev.J

www.rohm.com

Data Sheet

KDZV series

lElectrical characteristic curves

100

1000

10000

0.001 0.01 0.1 1 10

100

1000

0.001 0.01 0.1 1 10 100 1000

Rth(j-a)

Rth(j-c)

-5

-0.08

-0.06

-0.04

-0.02

0.02

0.04

0.06

0.08

0.1

0.12

010 20 30 40

200

400

600

800

1000

1200

025 50 75 100 125 150

POWER DISPERSION : Pd(mW)

AMBIENT TEMPERATURE : Ta(°C)

Pd-Ta CHARACTERISTICS

REVERS SURGE MAXIMUM

POWER : PRSM(W)

TIME : t(ms)

PRSM-TIME CHARACTERISTICS

TEMP.COEFFICIENCE : γZ(%/°C)

ZENER VOLTAGE : VZ(V)

γZ -VZ CHARACTERISTICS

TEMP.COEFFICIENCE : γZ(mV/°C)

TIME : t(s)

Rth-t CHARACTERISTICS

TRANSIENT THERMAL IMPEDANCE : Rth(°C/W)

PRSM

1ms

IM=10mA IF=100mA

300ms

time

Mounted on glass epoxy board

4/6

2015.09 - Rev.J

www.rohm.com

Data Sheet

KDZV13B

lElectrical characteristic curves

0.0001

0.001

0.01

0.1

100

1000

0 1 2 3 4 5 6 7 8 9 10

Ta = 150°C

Ta = 75°C

Ta = 25°C

Ta = 125°C

Ta = -25°C

0.001

0.01

0.1

100

12 13 14 15 16

Ta = 75°C

Ta = 25°C

Ta = 125°C

Ta = -25°C

Ta = 150°C

100

1000

10000

0 2 4 6 8 10

f = 1MHz

13.5

13.6

13.7

13.8

13.9

AVE : 13.82V

Ta=25°C

IZ=20mA

n=30pcs

ZENER CURRENT : IZ(mA)

ZENER VOLTAGE : VZ(V)

VZ -IZ CHARACTERISTICS

REVERSE CURRENT : IR(nA)

REVERSE VOLTAGE : VR(V)

VR-IR CHARACTERISTICS

CAPACITANCE BETWEEN

TERMINALS : Ct(pF)

REVERSE VOLTAGE : VR(V)

VR-Ct CHARACTERISTICS

ZENER VOLTAGE : VZ(V)

VZ DISPERSION MAP

5/6

2015.09 - Rev.J

www.rohm.com

Data Sheet

KDZV13B

lElectrical characteristic curves

250

260

270

280

290

300

310

320

330

340

350

Ta=25°C

f=1MHz

VR=0V

n=10pcs

AVE : 304.9pF

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

Ta=25°C

VR=10V

n=30pcs

AVE : 0.0962nA

100

1000

0.1 1 10

No Break at 30kV

C=150pF

R=330W

REVERSE CURRENT : IR(nA)

IR DISPERSION MAP

CAPACITANCE BETWEEN

TERMINALS : Ct(pF)

Ct DISPERSION MAP

DYNAMIC IMPEDANCE : ZZ(W)

ZENER CURRENT : IZ(mA)

ZZ -IZ CHARACTERISTICS

ELECTROSTATIC

DISCHARGE TEST ESD(kV)

ESD DISPERSION MAP

C=100pF

R=1.5kW

C=200pF

R=0W

6/6

2015.09 - Rev.J

Datasheet

Notice-PGA-E Rev.001

Notice

Precaution on using ROHM Products

1. Our Products are designed and manufactured for applicatio n in ordinar y elec tronic eq uipm ents (such as AV equipment ,

OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you

intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport

equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or

serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.

Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any

damages, expenses or losses incurred b y you or third parties arisin g from the use of an y ROHM’s Prod ucts for Specific

Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN USA EU CHINA

CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ

CLASSⅣ CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe d esign against the physical injur y, damage to any property, which

a failure or malfunction of our Products may cause. T he following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are designed and manufactured for use under standard conditions and not under any special or

extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any

special or extraordinary environments or conditions. If you intend to use our Products under any special or

extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of

product performance, reliabili ty, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlig ht or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing comp onents, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flu x (even if you use no-clean type fluxes, cleaning residue of

flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning

residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radi ation-proof design.

5. Please verify and confirm ch aracteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Po wer Dissipation (P d) depe nding on Ambient temperature (T a). When us ed in sealed area, confirm the actual

ambient temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or lia ble for failure induced under deviant conditio n from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogen ous (chlori ne, bromine, etc.) flu x is used, the residue of flux may negativel y affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM represe ntative in advance.

For details, please refer to ROHM Mounting specification

Datasheet

Notice-PGA-E Rev.001

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise you r own indepen dent verificatio n and judgmen t in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please t ake special care under dry condit ion (e.g. Grounding of human body / equipment / sol der iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportati on

1. Product performance and soldered connections may deteriorate if the Products are stored in the pl aces where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommende d b y ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderabilit y of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommen de d storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive s t ress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Pr oducts of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

QR code printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products pl ease dispose them properly using an auth orized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoi ng information or data will not infringe any int ellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained i n this document. Provide d, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including b ut not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

DatasheetDatasheet

Notice – WE Rev.001

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s

representative.

3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

ROHM Semiconductor:

KDZVTR13B