FDS5670
FDS5670 Rev. B
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain-Sourc e Breakdown Voltage VGS = 0 V, ID = 250 µA60 V
∆BVDSS
∆TJ
Breakdown Voltage Temperature
Coefficient ID = 250 µA, Referenced to 25°C58 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 48 V, V GS = 0 V 1 µA
IGSSF Gate-Body Leakage Current, Forward VGS = 20 V, VDS = 0 V 100 nA
IGSSR Gate-Body Leak age Current, Reverse VGS = -20 V, V DS = 0 V -100 nA
On Characteristics (Note 2)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA22.44 V
∆VGS(th)
∆TJ
Gate Threshold V oltage
Temperature Coefficient ID = 250 µA, Referenced to 25°C6.8 mV/°C
RDS(on) Static Drain-S ource
On-Resistance VGS = 10 V, I D = 10 A
VGS = 10 V, ID = 10 A, TJ=125°C
VGS = 6 V, ID = 9 A
0.012
0.019
0.014
0.014
0.027
0.017
Ω
ID(on) On-State Drain Current VGS = 10 V, V DS = 5 V 25 A
gFS Forward Transconductance VDS = 5 V, I D = 10 A 39 S
Dynamic Characteristics
Ciss Input Capacitance 2900 pF
Coss Output Capacit ance 685 pF
Crss Reverse Transf er Capacitance
VDS = 15 V, VGS = 0 V
f = 1.0 MHz
180 pF
Switching Characteristics (Note 2)
td(on) Turn-On Delay Time 16 29 ns
trTurn-On Rise Time 10 20 ns
td(off) Turn-Off Del ay Ti m e 50 80 ns
tfTurn-Off Fall Time
VDD = 30 V, ID = 1 A
VGS = 10 V, RGEN = 6 Ω
23 42 ns
QgTotal Gate Charge 49 70 nC
Qgs Gate-Source Charge 9 nC
Qgd Gate-Drain Charge
VDS = 20 V, I D = 10 A
VGS = 10 V,
10.4 nC
Drain-Source Diode Characteristics and Maximum Ratings
ISMaximum Cont i nuous Drain-Source Diode Forward Current 2.1 A
VSD Drain-Source Di ode Forward Voltage VGS = 0 V, I S = 2.1 A (Note 2) 0.72 1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the
drain pins. RθJC is guaranteed by design while RθJA is determined by the user's board design.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
a) 50° C/W when
mounted on a 0.5 in2
pad of 2 oz. copper.
b) 105° C/W when
mounted on a 0.02 in2
pad of 2 oz. copper.
c) 125° C/W when mounted
on a minimum pad.