HITACHI KAOHSIUNG HITACHI ELECTRONICS CO.,LTD P.O. BOX 26-27 2,13TH EAST ST: K.E.P.Z. KAOHSIUNG TAIWAN R.O.C. TEL:(07) 8215811 (7 LINE) FAX:(07) 821-5815 FOR MESSRS | STD DATE ; Feb.17,2006 CUSTOMERS ACCEPTANCE SPECIFICATIONS TX09D70VM1CCA CONTENTS No. ITEM SHEET No. PAGE 1 |COVER 7B64PS_ 2701-TXO9D70VM1CCA-4 |1-1/1 2 |RECORD OF REVISION 7B64PS 2702-TX09D/0VM1CCA-4 |2-1/2~2/2 3 _|GENERAL DATA /B64PS _ 2703-TX09D70VM1CCA-4 {3-1/1 4 |ABSOLUTE MAXIMUM RATINGS |7B64PS 2704-TXO9D70VM1CCA-4 |4-1/2~2/2 9 |ELECTRICAL CHARACTERISTICS |7B64PS 2705-TXO9D70VM1CCA-4 |5-1/2~2/2 - 6 |OPTICAL CHARACTERISTICS (B64PS 2706-TXO09D70VM1CCA-4 |6-1/2~2/2 7 |BLOCK DIAGRAM 7B64PS 2707-TXO9D70VM1CCA-4 {7-1/1 8 |INTERFACE TIMING CHART 7B64PS 2708-TXO9D70VM1CCA-4 |8-1/6~6/6 9 |DIMENSIONAL OUTLINE 7B63PS 2709-TXO09D70VM1CCA-4 |9-1/1 10 |APPEARANCE STANDARD 7B64PS 2710-TXOSD70VM1CCA-4 |10-1/4~4/4 11_|PRECAUTION IN DESIGN 7B64PS _2711-TXOSD70VM1CCA-4 |11-1/3~3/3 12 [DESIGNATION OF LOT MARK _|7B64PS 2712-TXO9D70VM1CCA-4 |12-1/1 _ 13 [PRECAUTION FOR USE 7B64PS 2713-TXO09D70VM1CCA-4 |13-1/1 *When product will be discontinued, customer will be informed by HITACHI with twelve months prior announcement. ACCEPTED BY; PROPOSED BY 7. Sup orpen l @a KAOHSIUNG HITACHI ELECTRONICS Co.,LTD. Sh. No. 7B64PS 2701-TX09D70VM1CCA-4 PAGE | 1-1/1RECORD OF REVISION SUMMARY Allewable Forward Carrent IF (ma) Allowable Forward Carrent |F (mA) 30 25 0 200 100 80 50 25 20 20 40 60 #80) (100 Ambient Temperatura Ta{C) Note 5: (FP Conditions : pulse widths=10ms and Duty=1H0 Ta=25'C 1 5.10 20 Duty Ratio(%) 50 100 2 ND @ moan o 8s &6 3S GS oo 7 ih Allowable Forward Carrent IF (mA) sy a 3 100 50 35 20 Allowable Forward Carrent IF (mA} 20 46 6O BO 100 Ambient Temperature Ta(C) T: 5 10 20 Duty Ratio(%) DATE SHEET No. Oct.28,'05 |/7B64PS 2704- 4.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS OF LCD TXOSD70VM1CCA-2 Revised PAGE 4-1/2 ITEM SYMBOL | MAX. LED Forward Current IF 25 Pulse Forward Current lep 80 | . ITEM SYMBOL | MAX. LED Forward Current IF 35 Pulse Forward Current lep 100 Note 4: 8.5mA (85C) IFP Conditions : pulse width=10ms and Duty=10 $0 100 /B64PS 2705- 5.2 ELECTRICAL CHARACTERISTICS OF BACK LIGHT TXO9D70VM1CCA-2 Revised PAGE 5-1/2 ITEM SYMBOL |CONDITION| MAX. | TYP. | MAX. LED _ Input Voltage VE IF=20mA - 3.75 4.2 LED - Forward Current IF 20 |: 20 . 1 . ITEM SYMBOL |CONDITION|] MAX. | TYP. | MAX. LED _ Input Voltage VE IF=20mA - 3.2 3.5 LED Forward Current IF 20 25 7B64PS 2705- 6.1 OPTICAL CHARACTERISTICS OF LCD TXOSD70VM1CCA-2 Revised the color tone PAGE 6-1/6 (TB64PS 2705- 8.5 INTERNAL PIN CONNECTION TXOSD70VM1CCA-2 Revised the function of PIN35 PAGE 8-6/6 Added Note1 KAOHSIUNG HITACHI Sh. Feb.17,06 7B64PS 2702-TX09D70VM1CCA-4/PAGE | 2-1/2 ELECTRONICS CO.,LTD. DATE , No.RECORD OF REVISION SUMMARY PAGE 8-3/6 DATE SHEET No. Jan.27,'06 |7B64PS 2705- 8.3 POWER ON/OFF SEQUENCE TXO9D70VM1CCA-3 Added the waveform of PCI signal 7B64PS 2705- TXO8D70VM1CCA-3 8.5 INTERNAL PIN CONNECTION Revised the function of PIN35 PAGE 8-6/6 Revised Note1 Feb.17,06 |7B64PS 2705- 8.1 INTERFACE TIMING TXOSD70VM1CCA-4 Revised PAGE 8-1/6 MIN MIN Horizontal Total 258 265 Horizontal Sync Start 246 > 244 Horizontal Syne End 250 248 Horizontal Blank Time 18 25 KAOHSIUNG HITACHI Sh. . 06 7B 2/02-TX' VM1 ~ E| 2-2/2 ELECTRONICS CO.LTD. DATE | Feb.17,0 No. 64PS osD70 CCA-4/|PAG3.GENERAL DATA The specifications are applied to the following TFT-LCD (Transmissive with micro reflectance) module with Back-light unit. (1) Part Name (2) Module Dimensions (3) Effective Display Area (4) Dot Pitch fr (8) Resolution (6) Color Pixel Arrangement (7) LCD Type (8) Display Type (9) Number of Colors (10) Backlight (11) Weight (12) Interface (13) Power Supply Voltage (14) Viewing Direction (15) Touch Panel TXO09D70VM1CCA 64.0(W)mm x 86.0(H)mm x 8.05(D)mm typ. 53.64(W)mm x 74.52(H)mm (Diagonal:9cm) 0.0745mm x 3(R,G,BYW) x 0.2235(H)mm 240 x 3(R,G,B)(W) x 320 (H) dots R,G,B Vertical Stripe Transmissive Color TFT LCD (Normally White) Active Matrix 262" Colors (R,G,B 6 Bit Digital each) Light Emitting Diode (LED) x6 (48)g 40 pin C-MOS 3.3V only (Including Timing Controller ,LCD and LED Power Unit) 6 O'clock (The direction it's hard to be discolored) Resistance type. The surface is anti-glare. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Feb.17,'06 Sh. No 7BE4PS 2703-TX09D70VM1CCA-4/PAGE | 3-1/14. ABSOLUTE MAXIMUM RATINGS 4.4 ELECTRICAL ABSOLUTE MAXIMUM RATINGS VSS=0V ITEM SYMBOL] MIN. MAX. UNIT COMMENT Power Supply for Logic VDD -0.3 4.0 V Input Voltage VI -0.3 VDD+0.3 (Note 1) Input Current li 0 1 A - + Static Electricity VESDO =100 V_| (Note 2,3) VESD1 - (8) kV | (Note 2,4) Forward Current IF - 35 mA _ | (Note 5) LED | Pulse Forward Current lFP - 100 mA (Note 6) Reverse Voltage VR - 5 V Note 1: DTMG, DCLK, RDO~RD5, GDO~GD5, BDO~BD5. , Note 2: 200pF-0Q 25C -70%RH Note 3: Interface Pin Connector. Note 4: The surface of metal bezel and LCD panel. Note 5: ze 50 = u 40 e 30 8.5mA (85C) oO E 20 = 40 2 8.5 $0 3 0 20 40 GO 80 100 Ambient Temperature Ta("C) Note 6: IFP Conditions : pulse widths10ms and Duty<1/10 = 200 Ta=25C E = 100 5 S50 S 35 B a 20 5 8 10 1 5 10 20 50 6160 Duty Ratio(%) KAOHSIUNG HITACHI ; Sh. ELECTRONICS CO.,LTD. DATE |Feb.17,'06 No,| 7B64PS 2704-TX09D70VM1CCA-4 PAGE | 4-1/24.2 ELECTRICAL ABSOLUTE MAXIMUM RATINGS OF TOUCH PANEL ITEM } SPECIFICATION UNIT | CONDITION | REMARKS Supply Voltage 7.0 V DC Endurance Voltage 25 V DC (Note 1) Note 1: Waiting 1 minute. 4.3 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS ELECTRONICS CO.,LTD. No. OPERATING STORAGE : ITEM Min. Max. Min. Max. REMARKS + |Ambient Temperature | -20C 70 -30C | 80C |(Note 2,3,6,7,9,10) | [Humidity (Note 1) 5 (Note 1) _ Without condensation Vibration - (0286) - Th30), (Note 4,5) 29.4m/s* 490m/s* Shock - (3G) - (50G) (Note 5,8) Corrosive Gas Not Acceptable Not Acceptable Note 1: Ta=40C : 85%RH max. Ta>40C : Absolute humidity must be lower than the humidity of 85%RH at 40C. Note 2: For storage condition Ta at -30C < 48h, at 80C < 100h. For operating condition Ta at -20C < 100h Note 3: Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note 4 : 5Hz~100Hz(Except resonance frequency) Note 5: This LCM will resume normal operation after finishing the test. Note 6: The response time will be slower as low temperature. Note 7: Only operation is guaranteed at operating temperature. Contrast, response time, another display quality are evaluated at 25C. Note 8: Pulse Width : 10ms Note 9: This is panel surface temperature , not ambient temperature. Note 10: If LED is drived by high current, the life time of LED will be reduced, also high | temperature and high humidity. KAOHSIUNG HITACHI Sh. DATE| Feb.17,06 7B64PS 2704-TXO9D70VM1CCA-4|PAGE | 4-2/25. ELECTRICAL CHARACTERISTICS 5.1 ELECTRICAL CHARACTERISTICS OF LCD Ta=25C , VSS=0V 1TEM SYMBOL | CONDITION MIN. TYP. MAX. UNIT Power Supply Voltage VDD - 3.0 | 3.3 3.6 V Input voltage for logic vi H" level 1.7 - VDD V (note 1) L level VSS ~ 0.7 Power Supply Current | pp |vpp-vss=3.3v) - | 200 | - | mA (note 2) Vsync Frequency VV - 52 | 60 68 Hz Hsync Frequency fH - 10.92 19.5 22.12 kHz DCLK Frequency fCLK 4.62 5.33 6.04 MHz Note 1: DTMG, DCLK, RDO~RD5, GD0~GD5, BDO= BD5. -Note 2: fV=60Hz, Ta= 25C, Pattern used as display pattern: All Black. Note 3: Need to made sure of flickering and rippling of display when setting the frame frequency in your set. 9.2 ELECTRICAL CHARACTERISTICS OF BACK LIGHT ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT | REMARKS Input Voltage VF IF=20mA | - | 3.2 | 35 | Vv | LED/Part Forward Current IF - - | 20 | 25 | ma | LED/Part Reverse Current IR VR=5V . - | 50 | wA | LED/Part Cunent Control Vetrl VDD-VSS=3.3V 0 1.8 4.0 Vv (Note 1) Note 1: LED current depend on following conditions . LED current is calculated by Vctrl and VFB when VFB is controlled by Vctrl. 250->- TA=25C 200 ST, VFB(mv) 190 om) J ILED : YEB : when Vetrl > 4.8V 150 yf 10 56 4 ILED : vo. When Vetrl < 4V. 0 0 05 1 1.5 2 . Vetrl (V) KAOHSIUNG HITACHI Sh Feb.17,06| |7B64PS 2705-TXO9D70VM1CCA-4|PAGE | 5-1/2 ELECTRONICS Co..LTp, PATE} Fee No. m05.3 ELECTRICAL CHARACTERISTICS OF TOUCH PANEL ITEM SPECIFICATION UNIT ; PXR- xb 200 - 650 ohm Resistance between Terminal yU-yL 350 - 500 ohm Insuiance Resistance (Note 1} | X-Y 10M min. ohm a x 1.5 max. % Linearity (Note 2,3) y 15 max % Chattering 10 max. ms Note 1: Operating Voltage 25V DC. Note 2: Test Condition. (a) Y axis linearity testing method (with tip radius 0.8, polaycetal pen). VxL-xR=5V , VOUT=VyU. yu AG @-O-0- O ) 5b- 6 0-0-6 FOPEO P| G @-O-P-F E> O-O-0- & -) | | Viewing Area * ro o FPP OO] N He -9-0- @ -O [T* IO 6 6-6 6 6 | | | |" BVDC(25mA max.) Note (4) Pen Force Area T/P Active Area N (b) X axis linearity method VyU-yL=5V , VOUT=VxL. Note 3 : Calculation (a) Y axis linearity V7 : 4 __ 4\E max. ~ Linearity= EATEAG x100(%) . EA1 }---------- . ~ x ! E ; Measurement 7] | E(V) < | ) X ff 2 | | -= EAS [~~ ! Yo Pop a a a a ee ee AG At 1mm *1 mm * 1 Input Position 5.4 MECHANICAL CHARACTERISTICS OF TOUCH PANEL ITEM SPECIFICATION | UNIT REMARKS Pen Input Pressure 0.1- 1.3 N RO.8mm Polyacetal pen Note(4) Surface Hardness 3H min. - JIS K 5400 KAOHSIUNG HITACHI ' Sh. ELECTRONICS CO.,LTD. DATE | Feb.17,'06 No.| B64PS 2705-TX09D70VM1CCA-4 PAGE | 5-2/26. OPTICAL CHARACTERISTICS 6.1 OPTICAL CHARACTERISTICS OF LCD (BACK LIGHT ON ) Ta=25C ITEM SYMBOL| CONDITION | MIN. | TYP. | MAX. [UNIT] NOTE Brightness B g=0 a=0 | - 320 - |ed/m?} = (1) Uniformity - =0 @=0 | 70 - - % |{2),(3),(4) OX =0 K=5.0 - 70 - Ox |@=180>K25.0| - 70 - Viewing Angle deg | (5),(6) by =90 ,K=5.0 - 80 - * Gy |@=270K=5.0|] - 60 - Contrast Ratio K =0 @=0 180 | 300 - - (4) Response Time (rise-fall) tr+tf ~=0 @=0 - (30) - ms (8) Color Tone Red x 0.55 | 0.60 | 0.65 - e (Primary Color) y 0.29 | 0.34 | 0.39 - x 0.28 | 0.33 | 0.38 - Green y 0.54 | 0.59 | 0.64 - g=0 @=0 (4) x 0.09 | 0.14 | 0.19 - Blue y 0.07 | 0.12 | 0.17 - Xx 0.27 | 0.32 | 0.37 - White y 0.29 | 0.34 | 0.39 - Note 1: Active area center Note 2 : Driving Condition Display Pattern : White Raster LED Current : 20mA / Part Measurement of the following 5 places on the display. - K=50 X=120 X=190 ! sPromttpo coor G3 ---- PF Y=70 Orta @ Dots area > \ ee | va160 Cc. pennant cca - = 4 | 5 6 |---| ve 1 12 13 i i ! I ! (Measurement condition : HITACHI standard) Note (4)~(7) : See page 6-2/2 Note 3: Definition of the brightness uniformity M ( in. brightness ) Max. brightness x 100 KAOHSIUNG HITACHI 47 ELECTRONICS CO.,LTD. Feb.1 DATE Sh 06 ' No. |\7B64PS 2706-TXOSD70VM1CCA-4 PAGE 6-1/2Note 4 : Measurement Condition Note 5 : Definition of @ and 6 (Normal) Viewing direction BM-5A ea (Measurement field 1} (o=90") ~ (@=180) XY LCD . Note 6 : Definition of Viewing angle y BM-SA or Similar equipment Note 7 : Definition of contrast "K" _ White Brightness K=Black Brightness Note & : Definition optical response time eo Black White Black % 100 90 Brightness tr tf Rise time Fall time KAOHSIUNG HITACHI , Sh. , ELECTRONICS CO..LTD. DATE | Feb.17,'06 No. 7B64PS 2706-TXO9D70VM1CCA-4 | PAGE | 6-2/2?.BLOCK DIAGRAM ELECTRONICS CO.,LTD. DATE| Feb.17,06 No. vF(CNA) | Data / Clock > ani ST a Timing Signals Timing } 5 <2 ps Power Supply = Controller = a TET.LCD LED Control Signal = L LN] Power Nd G320 | Touch Panel => | TT Circuit 1 AA A ~ Signal | ; ~gnals D1 | b2|. D720 | LPN K Source Driver aA | > LED Driving > LED BIL _* Circuit | "} Touch Panel KAOHSIUNG HITACHI Sh. 7B64PS 2707-TX09D70VM1CCA-4|PAGE | 7-1/18. INTERFACE TIMING 8.1 INTERFACE TIMING MIN TYP. MAX. . UNIT SYMBOL Vertical Total - 327 - Line TO Vertical Sync Width 1 1 - Line T1 Vertical Sync Start - 322 - Line T2 Vertical Sync End - 323 - Line T3 Vertical Blank Time 5 7 - Line T4 Vertical Display End - 320 - Line T5 Horizontal Total 265 273 509 Pixel Clock T6 Horizontal Sync Width 4 5 10 Pixel Clock T7 Horizontal Sync Start 244 251 307 Pixel Clock T8 Horizontal Syne End 248 256 317 Pixel Clock T9 Horizontal Blank Time 25 33 269 Pixel Clock T10 Horizontal Display End - 240 - Pixel Clock T11 Note : Vertical Total should be set to odd. KAOHSIONG HITACHI DATE| Feb.17,'06 Sh. 7B64PS 2708-TXO9D70VM1CCA-4|PAGE | 8-1/6 ELECTRONICS CO.,LTD. No.8.2 TIMING CHART (Data is latched negative edge trigger of DCLK) TO Ti VSYNG (Note1.) T2 T3 HSYNC LI fz DIMG UU UU UU UU u RO-R5 G0-G5 BO-B5 HSYNC J DTMG - sd . RO-R5 T8 ] T9 : | T10 G0-G5 Invalid Data BO-B5 DCLK RO-R5 GO0-G5 BO-B5 166ns min. Sy LCs Invalid Data AOns min. VY KY ___40ns min. Fig1.Timing sequence for Graphic controller Note1. VSYNC is generated by Tcon IC. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Feb.17,'06 Sh. No. 7B64PS 2708-TXO9D70VM1CCA-4 PAGE 8-2/68.3 POWER ON/OFF SEQUENCE VDD ____/ Signal Z 2 frame min. Oms min. Data i Oms min. / B/L Oms min. / PCI NOTE: 0.8xDVBD 0.2xDVDD SEF 2 frame min. Oms min. ga 0 frame min. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Feb.17,'06 Sh. No. 7B64PS 2708-TX09D70VM1CCA-4 PAGE 8-3/68.4 RELATIONSHIP BETWEEN DISPLAYED COLOR AND INPUT DATA Sh. fl Bl ofolo}-|-|-|o}-]ololo}- Jolololalofol --|-Jolololol<-lo -{o|< a : os} 0 O/O/O[ |] efO;efoloso] --|--;ololofolala] --|--;ololofoloj Orc} =< op Oli ol alol<|<-|<-|ol<-[ololal--|--olalolololol --|--Jolololololo}- -|o|< oR o|olol-j-[<|ol-]ololo [Ofolo]ololol--}--olalofololo |<} oO al nl eelel=izialel=felele |ololafololo}-|--;clololololo |[<|< 9121 ololol/-|-|-/o]-]ololo Jolololofofol --|--|}ololafalolo oe |B] alo]-jo]-jaj-|-[ololo Jololofol<lol- [ol-lololo 1ololo A] 610 O/O/-|ol<|/o]-f<]o/alo |alolofolol- JO[|[ [ol ola] --[-|olalo =| O} 8 olol-jol<lol<|<]ololol--|--|olololololo -|<{/<]o|o]oa}--|--|ololo -e 1 65 ofol<}of<-|ol<|<-]ololol.-f-Jofololololo -l<-|<fololol] --|--|ololo oO] | OS] ad el=lelefele|=felelel- tolololololo}. -|<-|<lojiclol.-|--|ololo 8] BS] o] o}-}o}-lo]-|-]ol]olo}. Jolololololo - |<-|<-]ololo] --|--|ololo | 2] O}}olojo}~|-j-fo}lo}- -|ol-]ololol --|--}ololofololol--|--lololo I iY Ol[ololol-|/-|<-[olojc |Ool~]<-[olalo] - Joalcofofololo}- !aloloa oo | & Ale o|-|ololol<-|<-|<-]ololo- lj -]ololol--}--;ojolofolo[o] --|--}alolo Slr Oo]<|ofolo]/-|<-|<-]ololo!. ci<t<]ololo]--|--Jololojfololol.|.-lololo oY te ol|-|ololol|-|-|-]ololol. efo-l[elololo] --|--lololojololol] --|--lololo =I co we | Sl o|-|o}olo}-|-|-]o]o}o} - |<-|<]ololo] --|--folololololol--|--lololo o = Ss} 3 ~sj-i _|s aa | ~|~| | SIs alae) as | ~~ oO a x|(o) =o} cl El] FS] of] | A) AN] lo] <] ey) oe oe ee oo N]]oO c O| =] C] 1 a fo) = SO) =|] 4 Ol El SS c| c} cp oj] Set Nad > = o} | o| O} S| Kf ol Ss) --| | Bl] Bl Bp ol] SIS] --| | o] of of] ol Ol -| G| &| @ ai Oy] 2) aC] S| 3 |S] a] 2] @ claelo| Oo! eo 2 Lf] | 2} oO) Ss] 2 co} col co wa OQ c _ 5 26 a oO o a 2 2S oO oO = o fal 06 8 moO or 6 oo 17,06 7B64PS 2708- OVM - GE| 8-4/ ELECTRONICS CO.LTD. DATE| Feb No | B 8-TXO9D70VM1CCA-4|PA 6 KAOHSIUNG HITACHI8.4.2 Data address D(0,0) D(1,0) RIG R|G|B D (0.0) D (239,0) RIG/B D (0,319) D (239,319) Top View KACHSIENG HITACHI pate | Feb.17,06|"| zp64Ps 2708-TXo9D70vMiCCcA-4 | PAGE ELECTRONICS Co.,LTD. No. 8-5/68.5 INTERNAL PIN CONNECTION CN1 AMP : 1770046-3(Suitable: FPC : t0.30.03mm > 0.540.03mm pitch) PIN No.| SIGNAL FUNCTION 1 VDD Power Supply for Logic 2 VDD Power Supply for Logic 3 VDD Power Supply for Logic 4 DCLK [Dot Clock 5 VSS GND 6 HSYNC Horizontal Sync Pulse t VSS GND 8 DIMG __|Timing Signal for Data 9 VSS GND 10 NC No Connection 11 VSS GND 12 R5 13 R4 Red Data 14 R3 15 VSS GND 16 R2 17 R1 Red Data 18 RQ 19 VSS GND 20 G5 21 G4 Green Data 22 G3 23 VSS GND 24 G2 25 G1 Green Data 26 GO 27 VSS GND 28 B5 29 B4 Blue Data 30 B3 31 VSS GND 32 B2 33 B1 Blue Data 34 BO 35 PCI Power Control In (Note1) 36 Vetrl LED Current Control 37 AR Touch Panel Right Side 38 YL Touch Panel Lower Side 39 XL Touch Panel Left Side 40 YU Touch Panel Upper Side Note 1. Please follow the page 8-3/6 to set the PCI. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE] Feb.17,'06 Sh. No. 7B64PS 2708-TX09D70VM1CCA-4 PAGE 8-6/69. DIMENSIONAL OUTLINE 0.340.3 2.5420.3 2.9940.3 3.99max. 4.5440.3 6440.3 0.520.3 | 63.0+0.3(T/P Outline) 3.1840.3 57.64+0.2(Bezel opening Area) 3.43403 56.14+40.5(T/P Viewing Area} 4.43max. 54.14min.(T/P Active Area) 5.18+0.3 53.64+0.1(LCD Active Area) 3240.3 86.040.3 83.5+0.3(T/P Outline) 75,52+0.2(Bezel Opening Area) 74.02+0.5(T/P Viewing Area) 72,02min.(T/P Active Area) 71.5240.1(LCD Active Area) 40.3 = Detail B Section H2-H2 se 4.0+0.3(Except FPC Area) 5240.2 (Bezel Opening Area) 640.15 S |, (1.0) Ts) oh Qo +l re) wo Nh 0 a 4H o _~ o ws | a e Connector, } 1 f\ 0. oO sf L 6.25) JO % CO} G20: one TA, = a CN1_ / 3 | oO He ! rr] Oo | & Oo] o ~ o 4 L 8 i Ui ] Fi J) oor Lf lp Wyo 8.05+40.3 4-03.0 \ - Components Area ~ (Including Connector Area) . S 63+0.3(PCB Outline) (0.5) al 5/2 @la|2 cA | =lc| Detail A 5 7 4 f ; 0] (0.55) (0.55) ___> Detail B Detail A Scale: NTS Unit: mm KAOHSIUNG HITACHI v | Sh. ELECTRONICS CO.LTD. DATE | Feb.17,'06. |yjo, | 7B64PS 2709-TXO9D70VM1CCA-4 |PAGE | 9-1/110. APPEARANCE STANDARD 10.1 APPEARANCE INSPECTION CONDITION Visual inspection should be done under the following condition. (1) The inspection should be done in a dark room.(More than 1000(Ix) and non-directive) - (2) The distance between eyes of an inspector and the LCD module is 30cm. (3) The viewing zone is shown the figure. Viewing angle=25 eye LCD Bezel 10.2 DEFINITION OF ZONE Active area (pixel area) y Until Imm outside around Active area Metal bezel area - VA (include [/F connector) A zone B zone C zone KAOHSIUNG HITACHI Sh. ELECTRONICS CO.,LTD. DATE| Feb.17,'06 No. 7B64PS 2710-TXO9D70VM1CCA-4 |PAGE | 10-1/410.3 APPEARANCE SPECIFICATION (1)LCD Appearance *) If the problem related to this section occurs about this item, the responsible persons of both party (Customer and HITACHI) will discuss the matter in detail. APPLIED No. ITEM CRITERIA ZONE Scratches Length Width Maximum number L{mm) Wi(mm) acceptable L<2.0 W<0.03 ~ ignored A,B L=2.0 0.03<W=0.05 4 L>2.0 0.05<W none Dent Distinguished one is acceptable A . (To be judged by HITACHI standard) Wrinkles in Polarizer | Same as above A Bubbles Average diameter Maximum number Di(mm) acceptable A D=0.3 2 0.3<D none Stains Filamentous {Line shape) Foreign Length Width Maximum number Materials L(mm) Wimm) acceptable AB L<2.0 W=0.05 4 Dark spot L<1.0 0.05<W<0.1 2 L Round(Dot shape) Average diameter D(mm) Maximum number C acceptable D=0.15 6 D 0.15<D<0,.2 4 A.B 0.2<D none The total number Filamentous + Round=9 Those wiped out easily are acceptable Color Tone To be judged by HITACHI STANDARD A Color Uniformity Same as above A Dot Defect Maximum number acceptable Sparkle mode 1 dot 4 2 dots . a{sets) Total 4 Black mode 1 dot 4 A.B 2 dots 2(sets) Total 4 oP a mone 2 dots 2(sets) Total 6 KAOHSIUNG HITACHI Sh, ELECTRONICS CO..LTD. DATE| Feb.17,06 No. 7B64PS 2710-TXO09D70VM1CCA-4 |PAGE | 10-2/4(2)Touch panel appearance Visual inspection should be done under the following condition. *) The inspection should be done in a dark room. (more: than 500 (Ix) and non-directive) ) The distance between eyes of an inspector and the LCD module is 30cm. *) The viewing angle<60, APPLIED No. ITEM CRITERIA ZONE Scratches Length Width Maximum number L(mm) Wi{mm) acceptable - W<0.05 ignored A,B 10<L 0.05=W<0.1 none - 0.1=W none Foreign Filamentous (Line shape) T | Materials Length Width Maximum number O L(mm) Wi(mm) acceptable U | Dark Spot - W<0.05 ignored AB A [>3 0.05<W=0.1 none - W=0.1 Round P Round(Dot shape) A Average diameter D(mm) Maximum number AB N acceptable , E D=0.25 ignored L 0.25<D<0.35 6 B 0.35<D none A,B Cloush Pana To be judged by HITACHI standard AB Touch Panel No conspicuous dirt A Uncleanness Rubbing Scratch To be judged by HITACHI standard - (3) Glass indentation ITEM SPECIFICATIONS Common x Indentation Xx Y Z Y Z <5.0|<3.0] <t_ Corner Broken Xx Y Z Zz $3.0) <3.0} =< Proceeding Crack ee None KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Sh. Feb.17,'06 No. 7B64PS 2710-TXO9D70VM1CCA-4 PAGE 10-3/4Note 1: Definition of average diameter (D) Note 3 : Definition of dot defect (a) Dot Defect : Defect Area > 1/2 dot (6) Sparkle mode: Brightness of dot is more than 30% at Black raster. (c) Black mode: Brightness of dot is less than 70% at R.G.B raster. (d) 1 dot: Defect dot is isolated , not attached to other defect dot. (e) N dot: N defect dots are consecutive . (N means the number of defect dots.) RGBIRGBIRGB 2 dots defect included defect dot X is defined as follows. Adjacent dots to defect dot xX: (f) Counting definition of adjacent dots(1 sets) : same as 1 dot defect. (g) Those wiped out easily are acceptable KAOHSIUNG HITACHI Sh. AT? 7B64PS 2710-TXO9D70VM1CCA-4 [PAGE| 10-4/4 ELECTRONICS Co..LTD, PATE] Fe 178 ' CAA11. PRECAUTION IN DESIGN 11.1 MOUNTING PRECAUTION (1) When assembling the Touch Panel and you case, please refer to the figure below. >2.0 rea nsulated area Cushion Case Touch Panel T (2) The clearance between the Touch Panel and case shall be designed so that the case edge never presses the input screen when it is deformed by heat or other causes. (3) The case shall be designed not to touch the tail portion (FPC for Touch Panel). (4) The boundary space between the effective area and the insulated area is unstable. Touching this area may effect the operation of the Touch Panel. The case must be designed so that it does not touch the boundary space. 11.2 PRECAUTIONS AGAINST ELECTROSTATIC DISCHARGE As this module contains C-MOS LSls, it is not strong against electrostatic discharge. Make certain that the operators body is connected to the ground through a list band , @tc. And dont touch I/F pins directly. 11.3 HANDLING PRECAUTIONS (1) Since the Touch Panel on the top, and the frame on the bottom tend to be easily damaged, they should be with full care so as not to get them touched, pushed or rubbed by a piece on glass, tweezers and anything else which are harder a pencil lead 3H. KAOHSIUNG HITACHI ] Sh. Feb.17,'0 7B64PS 2? -TXOSD70VM1CCA-4 |PAGE |] 11-1/3 ELECTRONICS Co.,LTD, PATE} Fe SINo. m(2) As the adhesives used for adhering upper/lower polarizers and frame are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene, ethanol and isopropyl. alcohol. The following are recommended for use : normal hexane Please contact with us when it is necessary for you to use chemicals other than the above. (3) Lightly wipe to clean the dirty surface with absorbent cotton or other soft material like chamois, soaked in the recommended chemicals without scrubbing it hardly. Always wipe the surface horizontally or vertically. Never give a wipe in a circle. fy To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. (4) Immediately wipe off saliva or water drop attached on the display area because it may cause deformation or faded color. (5) Fogy dew deposited on the surface may cause a damage, stain or dirt to the polarizer. When you need to take out the LCD module from some place at low temperature for test, etc. It is required to be warmed them up to temperature higher than room temperature before taking them out. (6) Touching the display area or I/F pins with bare hands or contaminating them are prohibited, because the stain on the display area and poor insulation between terminals are often caused by being touched with bare hands. (Some cosmetics are detrimental to polarizers.) (7) In general, the glass is fragile so that, especially on its periphery, tends to be cracked or chipped in handling. Please not give the LCD module sharp shocks by falling , etc. (8) Maximum pressure to the surface must be, less than 1.96x10* Pa. p And if the pressure area is less than 1cm*, maximum pressure must be less than 1.96N. ; (9) Since the metal width is narrow on these locations (see page 9-1/1), please careful with handling. (10) Top sheets shall be cleaned gently using a soft cloth such as those used for glasses. Hard wiping accumulated dust will leave scars on the surface even using a cloth. 11.4 OPERATION PRECAUTION (1) Using a LCM module beyond its maximum ratings may result in its permanent destruction. LCM modules should usually be used under recommended operating conditions shown in chapter 5. Exceeding any of these conditions may adversely affect its reliability. KAOHSIUNG HITACHI | Sh. b.17,06 7B64P 11-TXO9D70VM1CCA-4 |PAGE | 11-2/3 ELECTRONICS co..LTp, PATE] Fe No. S27 9(2) Response time will be extremely delayed at lower temperature than the specified operating temperature range and on the other hand LCDs shows dark blue at higher temperature. However those phenomena do not main defects of the LCD module. Those phenomena will disappear in the specified operating temperature range. (3) If the display area is pushed hard during operation, some display patterns will be abnormally display. (4) A slight dew depositing on terminals may cause electrochemical reaction which leads to terminal open circuit. Please operate the LCD module under the relative condition of 40C 85%RH. r+ (5) Resistance range : Your controller shall be set up to allow the resistance range of Touch Panel specified in our CAS. (6) Pointed position of Touch Panel may shift owing to a change in resistance of Touch Panel depending on the operation condition. To compensate this shift, the set shall be given a calibration function. (7) Input shall be made with a stylus pen (polyacetal ,R0O.8). Chances are very high that use of a metal piece including a ball point pen or sharp edge will impair accuracy. (8) The Touch Panel is an auxiliary input device. The system shall be designed to have other input device. 11.5 STORAGE in case of storing LCD module for a long period of time (for instance, for years) for the purpose of replacement use, the following precautions necessary. (1) Store the LCD modules in a dark place; do not expose them to sunlight or ultraviolet rays. (2) Keep the temperature between -20C and 70C at normal humidity. (3) Store the LCD modules in the container which is used for shipping from-us. (4) No articles shall be left on the surface over an extended period of time. 11.6 SAFETY Wear finger cots or gloves whenever handling or assembling a Touch Panel its: glass edges are sharp. KAOHSIUNG HITACHI Sh. 17,70 7B64P -TXO09D70VM1 -4 |PAGE |11-3/3 ELECTRONICS Co.,LTD, PATE] Fee: 17/08 S$ 2711-TX CCA-412.DESIGNATION OF LOT MARK 12.1 LOT MARK Lot mark is consisted of 4 digits for production lot and 5 digits for production control. Made in Taiwan Serial No. Week Month Year Year Mark Month | Jan.|Feb.|Mar.| Apr. | May | Jun. Week (Day In] Figure In 2006 6 Calendar) | Lot Mark 2007 7 Mark | 01 | 02 | 03 | 04 | 05 | 06 01~07 4 2008 8 08~14 2 2009 9 Month | Jul. |Aug.]Sep.| Oct. |Nov.|Dec. 15~24 3 2010 0 Mark | 07 | 08 | 09 | 10 | 11 | 12 22~28 4 29~31 5 12.2 Location of Label : On the PCB HITACHI REV.A TXOSD70VM1CCA MADE IN TAIWAN | | | | | Oo IL Lot No. H oO iL \ saa KAOHSIUNG HITACHI . Sh. ELECTRONICS CO.,LTD. DATE | Feb.17,'06 No. 7BB4PS 2712-TX09D70VM1CCA-4 PAGE | 12-1/113. PRECAUTION FOR USE (1)A limit sample should be provided by the both parities on an occasion when the both parties agree to its necessity. Judgement by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. (2) On the following occasions, the handling of the problem should be decided through discussion and agreement between responsible persons of the both parties. 1) When a question is arisen in the specifications. 2) When a new problem is arisen which is not specified in this specifications. 3) When an inspection specifications change or operating condition change by customer is reported to HITACHI, and some problem is arisen in the specification due to the change. 4) When a new problem is arisen at the customer's operating set for sample evaluation. (3} Regarding the treatment for maintenance and repairing, both parties will discuss it in six months later after latest delivery of this product. The precaution that should be observed when handling LCM have been explained above. If any points are unclear or if you have any requests , please contact with HITACHI. KAOHSIUNG HITACHI sh Feb.17,06| || 7B64PS 2713-TXO9D70VM1CCA-4 PAGE | 13-1/1 ELECTRONICS Co.,LTD, P*TE| Te No. MIS-TXOSDTOVMICCA-4