SY10E151 SY100E151 FINAL 6-BIT D REGISTER FEATURES DESCRIPTION 1100MHz toggle frequency Extended 100E VEE range of -4.2V to -5.46V The SY10/100E151 offer 6 edge-triggered, high-speed, master-slave D-type flip-flops with differential outputs, designed for use in new, high-performance ECL systems. The two external clock signals (CLK1, CLK2) are gated through a logical OR operation before use as clocking control for the flip-flops. Data is clocked into the flip-flops on the rising edge of either CLK1 or CLK2 (or both). When both CLK1 and CLK2 are at a logic LOW, data enters the master and is transferred to the slave when either CLK1 or CLK2 (or both) go HIGH. The MR (Master Reset) signal operates asynchronously to make all Q outputs go to a logic LOW. Differential outputs Asynchronous Master Reset Dual clocks Fully compatible with industry standard 10KH, 100K ECL levels Internal 75K input pulldown resistors Fully compatible with Motorola MC10E/100E151 Available in 28-pin PLCC package BLOCK DIAGRAM R VCCO Q5 Q5 Q0 D CLK1 NC MR CLK2 D0 PIN CONFIGURATION Q0 25 24 23 22 21 20 19 Q1 27 17 Q4 VCC Q3 D2 2 D1 3 D0 4 Q2 28 15 14 13 12 5 Q3 16 PLCC TOP VIEW J28-1 1 Q4 D R D5 Q4 D4 D3 VEE Q3 D R D4 18 Q2 D R D3 26 6 7 8 9 Q3 Q2 Q2 10 11 VCCO D2 D5 Q0 R Q1 Q0 Q1 Q1 D NC VCCO D1 Q4 Q5 D R PIN NAMES Q5 CLK1 CLK2 Pin M R Function D0-D5 Data Inputs CLK1, CLK2 Clock Inputs MR Master Reset Q0-Q5 True Outputs Q0-Q5 Inverting Outputs VCCO VCC to Output Rev.: E 1 Amendment: /0 Issue Date: November 2002 SY10E151 SY100E151 Micrel TRUTH TABLES(1) Synchronous Operation Asynchronous Operation Inputs Inputs Output Output Dn CLK1 CLK2 MR Qn(t + 1) Dn CLK1 CLK2 MR Qn(t + 1) X X X H L L u L L L H u L L H L L u L L H L u L H X H u L Qn(t) X u H L Qn(t) X L L L Qn(t) NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care t = Time before positive CLK transition t+1 = Time after positive CLK transition u = LOW-to-HIGH transition DC ELECTRICAL CHARACTERISTICS(1) VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol Parameter TA = +25C Min. Typ. Max. Min. Typ. IIH Input HIGH Current IEE Power Supply Current 10E 100E TA = +85C Max. Min. Typ. Max. Unit Condition A -- mA -- -- -- 150 -- -- 150 -- -- 150 -- -- 65 65 78 78 -- -- 65 65 78 78 -- -- 65 75 78 90 NOTE: 1. Specification for packaged product only. 2 SY10E151 SY100E151 Micrel AC ELECTRICAL CHARACTERISTICS(2) VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol Parameter TA = +25C Min. Typ. Max. Min. Typ. -- 1100 1400 TA = +85C Max. Min. Typ. -- Unit Condition -- MHz -- ps -- fMAX Max. Toggle Frequency 1100 1400 tPLH tPHL Propagation Delay to Output CLK MR 475 475 650 650 800 850 475 475 650 650 800 850 475 475 650 650 800 850 tS Set-up Time, D 0 -175 -- 0 -175 -- 0 -175 -- ps -- tH Hold Time, D 350 175 -- 350 175 -- 350 175 -- ps -- tRR Reset Recovery Time 750 550 -- 750 550 -- 750 550 -- ps -- tPW Minimum Pulse Width CLK, MR 400 -- -- 400 -- -- 400 -- -- ps -- tskew Within-Device Skew -- 65 -- -- 65 -- -- 65 -- ps 1 tr tf Rise/Fall Time 20% to 80% 300 450 700 300 450 700 300 450 700 ps -- NOTE: 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Specification for packaged product only. PRODUCT ORDERING CODE Ordering Code Package Type Operating Range SY10E151JI J28-1 Industrial SY10E151JITR* J28-1 Industrial SY100E151JI J28-1 Industrial SY100E151JITR* J28-1 Industrial *Tape and Reel 3 1100 1400 Max. SY10E151 SY100E151 Micrel 28 LEAD PLCC (J28-1) Rev. 03 MICREL, INC. TEL 1849 FORTUNE DRIVE SAN JOSE, CA 95131 + 1 (408) 944-0800 FAX + 1 (408) 944-0970 WEB USA http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel, Inc. (c) 2002 Micrel, Incorporated. 4