The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Subminiature, Waterproof Duplex Fiber Optic Connectors MF10B Series Waterproof 2pos. Bayonet lock Highly reliable bayonet lock. When jointing Simply by turning around the sleeve, the taper portion of the pin is run on and it's easily jointed. Plug pin Sleeve While jointed The rear end portion of the pin is edged, making it difficult to remove. Features 1. Micro miniature structure This micro miniature twin-core waterproof connector consists of a O1.25mmMU ferrule encased in an internal housing and shell. Ferrule with easy-clean structure 1. Loosen screw and remove cover Screw Cover 2. Integrated structure with excellent vibration and shock resistance The bayonet lock assures connectors are easily and firmly mated. In addition, mating design resists disengagement, resulting in excellent resistance to vibration and shock, conforming to JIS E 4031 type 5 (vibration) and JIS E 4032 type 2 (shock) for railcar parts. 3. Excellent compatibility with high-intensity, high flexible cables. For the plug side, a high-intensity optical fiber cable is available for military spec (external cable diameter O5 or O6.5 mm) is the standard specification.) This cable is light, flexible and suitable for longdistance link-ups in outdoor events. 2. Remove split sleeve Split sleeve Tool for removal of split sleeve (optional) Ferrule 3. Clean the ferrule edge face and reassemble. Varied panel attachment method 4-point screw fix type mm Pitch 18 mm Pitch 20 * For other cables, please consult factory. 4. Structure with a cleanable ferrule end face When cleaning the plug ferrule, remove the sleeve from the front to expose the ferrule edge face and thus facilitate cleaning. 5. Varied panel mounting options Square flange mounting with 4 screws in 4 positions and internal attachment via hexagon nuts are possible. The square flange type with 4 screws can be used for pitches between between 18 and 20mm. 160 Available for pitch of ellipsoidal holes ranging from 18-20mm Hexagon nut fix type Insertable from the panel rear, which makes it easy to waterproof The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. MF10B SeriesSubminiature, Waterproof Duplex Fiber Optic Connectors Specifications Rating Operating Temperature Range -40c~85c Storage Temperature Range Item Test method Optical Measurement at wave length Insertion loss characteristics 131020nm(LED) Durability 5,000times (mating/un-mating) A tensile force to cable axially for at Tensile 200N(Cable Dia: O6.5mm), strength(axial) 100N(Cable Dia: O5mm),400N(Cable with Mechanical tension member) characteristics 10,000 times at 90 degree,right and left Flex Resistant direction. 2 hours of the right and left,4 hours of the vertical direction Vibration at an amplitude of 2.3mm and an acceleration 14.8G. 4 times and 2 directions with the acceleration Shock 88m/s2 and length of effectiveness 0.025s. Humidity -10c to +65c, humidity: 90% to 96% (Temperature/ 240hours. (24H/cycle10cycle) humidity-cycles) Temperature cycle -40c to +75c, 42 cycles 240 hours at +85c Environmental Dry heat 240 hours at _40c characteristics Cold Salt mist :5% and temperature 35c for 1000hours. Salt mist With the connector hood installed. Water Put the product under water for 1min.With air resistance(mating) pressure 4.9kPa. -25c~75c Requirements SM: 1.0 dB MAX. (Typical 0.2 dB) GI: 0.5 dB MAX. (Typical 0.1 dB) 1) Insertion loss fluctuation after test:0.3dB max. 2) No visible damage or components dislocation. Insertion loss range:0.3dB No Looseness,breakage,cracks 1) Insertion loss fluctuation after test:0.3dB max. 2) No visible damage or components dislocation. No corrosion. No air leakage. Material and Finish Component Material Finishi/Remarks Housing Zinc die-casting Nickel plated / Chrome plated (Black) Stopper Synthetic resin UL94V-0 Rubber hood Synthetic rubber ------ Spring Piano wire Zinc plated Split sleeve Zirconia ------ 161 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. MF10B SeriesSubminiature, Waterproof Duplex Fiber Optic Connectors Plug Cable without tension member (Cable dia: O5mm, 6mm) O16.8 57.5 84 Part number CL No. Plating MF10B-WP5C01-0200 CL709-1020-8-00 Nickel MF10B-WP5CH01-0200 CL709-1015-8-00 Chrome(black) MF10B-WP6.5C01-0200 CL709-1004-1-00 MF10B-WP6.5CH01-0200 CL709-1007-0-00 Nickel Chrome(black) Cable with tension member (Cable dia: O7 mm) Part number MF10B-WPS7C01-0200 CL No. Plating CL709-1018-6-00 Nickel MF10B-WPS7CH01-0200 CL709-1024-9-00 Chrome(black) Receptacle O0.9 core wire, M3 screw attachment type 18 20 Part number 162 CL No. Plating MF10B-WRF01-0200 CL709-1005-4-00 Nickel MF10B-WRFH01-0200 CL709-1008-2-00 Chrome(black) O14 25 1 3 O3 16 11.65 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. MF10B SeriesSubminiature, Waterproof Duplex Fiber Optic Connectors O2 code, M3 screw attachment type 46 O3 16 11.65 25 O12.8 1 O14 3 18 20 CL No. Plating MF10B-WRFC01-0200 Part number CL709-1014-5-00 Nickel MF10B-WRFCH01-0200 CL709-1032-7-00 Chrome(black) O0.9 core wire, hexagon nut attachment type 16 25 O12.8 O14 3 O3 2.5MAX(Panel thikness size) 18 20 Part number CL No. Plating MF10B-WRB01-0200 CL709-1010-4-00 Nickel MF10B-WRBH01-0200 CL709-1025-1-00 Chrome(black) O2 code, hexagon nut attachment type 25 O12.8 3 O3 2.5MAX(Panel thikness size) 18 20 Part number CL No. Plating MF10B-WRBC01-0200 CL709-1013-2-00 Nickel MF10B-WRBCH01-0200 CL709-1033-0-00 Chrome(black) 163 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. MF10B SeriesSubminiature, Waterproof Duplex Fiber Optic Connectors Recommended panel cutouts 200.05 +1 0 .1 180.05 O1 6.0 5 +0 0 .1 200.05 180.05 4 O1 14.9 .2 O3 +0.1 0 4- M3 screw attachment type Hexagon nut attachment type Tools Plug assembly tool Part number CL No. MF10B-WP7C01-0200/CVMD CL902-6063-0-00 Part number CL No. Split sleeve removal tool MF10B-T1 164 CL709-1034-2-00