160
Subminiature, Waterproof Duplex Fiber Optic Connectors
MF10B Series Waterproof 2pos. Bayonet lock
Sleeve
Plug pin
Simply by turning around the
sleeve, the taper portion of the
pin is run on and it's easily jointed.
The rear end portion of the
pin is edged, making it difficult
to remove.
When jointing
While jointed
1. Loosen screw and remove cover
3. Clean the ferrule edge face
and reassemble.
2. Remove split sleeve
ScrewScrew Split sleeve
Cover
Ferrule
Tool for removal of
split sleeve (optional)
4-point screw fix type
Hexagon nut fix type
Available for pitch of ellipsoidal
holes ranging from 18-20mm
Insertable from the panel rear,
which makes it easy to
waterproof
Pitch 18mm
Pitch 20mm
■Features
1. Micro miniature structure
This micro miniature twin-core waterproof connector
consists of a Ø1.25mmMU ferrule encased in an
internal housing and shell.
2. Integrated structure with excellent vibration
and shock resistance
The bayonet lock assures connectors are easily and
firmly mated. In addition, mating design resists
disengagement, resulting in excellent resistance to
vibration and shock, conforming to JIS E 4031 type 5
(vibration) and JIS E 4032 type 2 (shock) for railcar parts.
3. Excellent compatibility with high-intensity,
high flexib le cables.
For the plug side, a high-intensity optical fiber cable is
available for military spec (external cable diameter Ø5
or Ø6.5 mm) is the standard specification.)
This cable is light, flexible and suitable for long-
distance link-ups in outdoor events.
* For other cables, please consult factory.
4. Structure with a cleanable ferrule end face
When cleaning the plug ferrule, remove the sleeve
from the front to expose the ferrule edge face and thus
facilitate cleaning.
5. Varied panel mounting options
Square flange mounting with 4 screws in 4 positions
and internal attachment via hexagon nuts are possible.
The square flange type with 4 screws can be used for
pitches between between 18 and 20mm.
Highly reliable bayonet lock.
Ferrule with easy-clean structure
Varied panel attachment method
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
161
MF10B Series●Subminiature, Waterproof Duplex Fiber Optic Connectors
■Specifications
■Material and Finish
Housing Zinc die-casting
Nickel plated / Chrome plated (Black)
Stopper Synthetic resin UL94V-0
Rubber hood Synthetic rubber ––––––
Spring Piano wire Zinc plated
Split sleeve Zirconia ––––––
Component Material Finishi/Remarks
Item RequirementsTest method
Mechanical
characteristics
Environmental
characteristics
Optical
characteristics
Humidity
(Temperature/
humidity-cycles)
Temperature cycle
Dry heat
Cold
Salt mist
Water
resistance(mating)
Shock
Flex Resistant
Vibration
Tensile
strength(axial)
Durability
(mating/un-mating)
Insertion loss
Measurement at wave length
1310±20nm(LED)
5,000times
A tensile force to cable axially for at
200N(Cable Dia: Ø6.5mm),
100N(Cable Dia: Ø5mm),400N(Cable with
tension member)
10,000 times at 90 degree,right and left
direction.
2 hours of the right and left,4 hours of the vertical direction
at an amplitude of 2.3mm and an acceleration 14.8G.
4 times and 2 directions with the acceleration
88m/s
2
and length of effectiveness 0.025s.
-10ç to +65ç, humidity: 90% to 96%
240hours. (24H/cycle∞10cycle)
-40ç to +75ç, 42 cycles
240 hours at +85ç
240 hours at _40ç
Salt mist :5% and temperature 35ç for 1000hours.
With the connector hood installed.
Put the product under water for 1min.With air
pressure 4.9kPa.
Insertion loss range:≤0.3dB
No Looseness,breakage,cracks
1) Insertion loss fluctuation after test:0.3dB max.
2) No visible damage or components dislocation.
No air leakage.
No corrosion.
1) Insertion loss fluctuation after test:0.3dB max.
2) No visible damage or components dislocation.
SM: 1.0 dB MAX. (Typical 0.2 dB)
GI: 0.5 dB MAX. (Typical 0.1 dB)
Rating
Operating Temperature Range
-25ç~75ç-40ç~85ç
Storage Temperature Range
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
162
MF10B Series●Subminiature, Waterproof Duplex Fiber Optic Connectors
■Plug
84
Ø16.8
57.5
MF10B-WP5C01-0200
MF10B-WP5CH01-0200
MF10B-WP6.5C01-0200
MF10B-WP6.5CH01-0200
CL709-1020-8-00
CL709-1015-8-00
CL709-1004-1-00
CL709-1007-0-00
Nickel
Chrome(black)
Nickel
Chrome(black)
Part number CL No. Plating
●Cable without tension member (Cable dia: Ø5mm, 6mm)
■Receptacle
1
Ø14
11.65
20
18
16
25
Ø33
MF10B-WRF01-0200
MF10B-WRFH01-0200
CL709-1005-4-00
CL709-1008-2-00
Nickel
Chrome(black)
Part number CL No. Plating
●Ø0.9 core wire, M3 screw attachment type
MF10B-WPS7C01-0200
MF10B-WPS7CH01-0200
CL709-1018-6-00
CL709-1024-9-00
Nickel
Chrome(black)
Part number CL No. Plating
●Cable with tension member (Cable dia: Ø7 mm)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
163
MF10B Series●Subminiature, Waterproof Duplex Fiber Optic Connectors
Ø14
46
Ø12.8
11.65
25
1
16
18
20
Ø33
MF10B-WRFC01-0200
MF10B-WRFCH01-0200
CL709-1014-5-00
CL709-1032-7-00
Nickel
Chrome(black)
Part number CL No. Plating
●Ø2 code, M3 screw attachment type
2.5MAX(Panel thikness size)
Ø12.8
25
18
20
Ø33
MF10B-WRBC01-0200
MF10B-WRBCH01-0200
CL709-1013-2-00
CL709-1033-0-00
Nickel
Chrome(black)
Part number CL No. Plating
●Ø2 code, hexagon nut attachment type
2.5MAX(Panel thikness size)
Ø14
Ø12.8
25
16
18
20
Ø33
MF10B-WRB01-0200
MF10B-WRBH01-0200
CL709-1010-4-00
CL709-1025-1-00
Nickel
Chrome(black)
Part number CL No. Plating
●Ø0.9 core wire, hexagon nut attachment type
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
164
MF10B Series●Subminiature, Waterproof Duplex Fiber Optic Connectors
■Recommended panel cutouts
14.9
+
0.1
0
20±0.05
18±0.05
20±0.05
18±0.05
4- Ø3.2
Ø14.1
+
1
0
Ø16.05
+
0.1
0
M3 screw attachment type Hexagon nut attachment type
■Tools
MF10B-WP7C01-0200/CVMD CL902-6063-0-00
Part number CL No.
MF10B-T1 CL709-1034-2-00
Part number CL No.
●Plug assembly tool
●Split sleeve removal tool
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.