E3Z-G61-M3J - Omron - Datasheet.Live

CSM_E3Z-G_DS_E_5_1

Grooved-type Photoelectric Sensor with Built-in Amplifier

E3Z-G

Grooved Design Eliminates Optical

Axis Adjustment

• One- and two-axis models available.

• Provides mutual interference prevention and EN standard

compliance.

Be sure to read Safety Precautions on

page 4.

Ordering Information

Sensors (Refer to Dimensions on page 4.)

Note: Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-G61 0.5M).

* The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the E3Z-

G61/G62.

Accessories (Order Separately)

Sensor I/O Connectors (Refer to Dimensions on XS3.)

Note: Refer to Introduction to Sensor I/O Connectors for details.

Protective Bracket (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R)

Sensing

method Appearance Connection method Sensing distance No. of opti-

cal axes

Model

NPN output PNP output

Through-beam

Pre-wired (2 m)

E3Z-G61 2M *E3Z-G81 2M

Pre-wired Connector

(M8, 4 pins) E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M

Pre-wired (2 m)

E3Z-G62 2M *E3Z-G82 2M

Pre-wired Connector

(M8, 4 pins) E3Z-G62-M3J 0.3M E3Z-G82-M3J 0.3M

No. of optical

axes Cable length Model

1 axis

0.3 m E3Z-G61-ECON 0.3M

0.5 m E3Z-G61-ECON 0.5M

2 m E3Z-G61-ECON 2M

2 axes

0.3 m E3Z-G62-ECON 0.3M

0.5 m E3Z-G62-ECON 0.5M

2 m E3Z-G62-ECON 2M

Infrared light

25 mm

Cable specification Appearance Type of cable Model

Standard cable

2 m

4-wire

XS3F-M421-402-A

5 m XS3F-M421-405-A

2 m XS3F-M422-402-A

5 m XS3F-M422-405-A

Appearance Model Applicable model

E39-L149 E3Z-G

Straight

L-shape

E3Z-G

Ratings and Specifications

Number of optical axes 1 2

Model NPN output E3Z-G61/E3Z-G61-M3J E3Z-G62/E3Z-G62-M3J

Item PNP output E3Z-G81/E3Z-G81-M3J E3Z-G82/E3Z-G82-M3J

Sensing distance

(distance between arms of groove) 25 mm

Standard sensing object Opaque, 1.5-mm dia. min.

Light source (wavelength) Infrared LED (940 nm)

Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.

Current consumption 25 mA max. 40 mA max.

Control output

Load power supply voltage: 26.4 VDC max.

Load current: 100 mA max. (Residual voltage: 1 V max.)

Open collector output (NPN or PNP depending on model)

Light-ON/Dark-ON selectable

Protection circuits Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference pre-

vention

Response time Operate or reset: 1 ms max.

Ambient illumination

(Receiver side)

Incandescent lamp: 3,000 lx max.

Sunlight: 10,000 lx max.

Ambient temperature range Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC between lead wires and case

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between lead wires and case

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions

Degree of protection IP64 (IEC 60529)

Connection method Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)

Indicator Operation indicator (orange)

Weight

(packed

state)

Pre-wired

(with 2-m cable) Approx. 65 g

Pre-wired Connectors Approx. 30 g

Material Case ABS (Acrylonitril Butadiene Styrene)

Accessories Instruction manual

E3Z-G

I/O Circuit Diagrams

NPN Output

PNP Output

No. of optical

axes/model

Operation

mode Timing charts Operation

selector Output circuit

1 axis

E3Z-G61

E3Z-G61-M3J

Light-ON L side

(LIGHT ON)

Dark-ON D side

(DARK ON)

2 axes

E3Z-G62

E3Z-G62-M3J

Light-ON L side

(LIGHT ON)

Dark-ON D side

(DARK ON)

Control output

Output transistor

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

(

Between brown and black leads

)

(S1)

e-CON Connector Pin Arrangemen

Connector Pin Arrangement

Pin 2 is not used.

12 to 24 VDC

Brown

Black

(Control output)

Blue

100mA

max.

Operation

indicator

(orange)

Load

(relay)

Photo-

electric

Sensor

Main

Circuit

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

(

Between brown and black leads

)

Control output

Output transistor

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

Control output

Output transistor

(Between brown

and black (white) leads)

e-CON Connector Pin Arrangemen

(S1)

(S2)

0 V

2White

Connector Pin Arrangement

12 to 24 VD

Brown

Black

(Control output)

Blue

100mA

max.

Operation

indicator

(orange)

Operation

indicator

(orange)

Load

(relay)

100mA

max.

Load

(relay)

(Control

output)

Photo-

electric

Sensor

Main

Circuit

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

(Between brown

and black (white) leads)

Control output

Output transistor

No. of optical

axes/model

Operation

mode Timing charts Operation

selector Output circuit

1 axis

E3Z-G81

E3Z-G81-M3J

Light-ON L side

(LIGHT ON)

Dark-ON D side

(DARK ON)

2 axes

E3Z-G82

E3Z-G82-M3J

Light-ON L side

(LIGHT ON)

Dark-ON D side

(DARK ON)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

(

Between blue and black leads

)

Control output

Output transistor

30 V

Connector Pin Arrangement

Pin 2 is not used.

12 to 24 VDC

Brown

Black

(Control output)

Blue

100mA

max.

Operation

indicator

(orange) Load

(relay)

Photo-

electric

Sensor

Main

Circuit

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

(Between blue and black leads

)

Control output

Output transistor

(Between blue and

black

(

white

)

leads

)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

Control output

Output transistor

0 V

White

Connector Pin Arrangement

12 to 24 VD

Brown

Black

(Control output)

Blue

100mA

max.

Operation

indicator

(orange)

Operation indicator

(orange)

Load

(relay)

100mA

max.

Load

(relay)

(Control

output)

Photo-

electric

Sensor

Main

Circuit

(Between blue and

black

(

white

)

leads

)

Incident light

No incident light

OFF

Operate

Reset

Operation

indicator

(orange)

Load

(e.g., relay)

Control output

Output transistor

E3Z-G

Plugs (Sensor I/O Connectors)

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

•Do not use the product in atmospheres or environments that

exceed product ratings.

•The degree of protection for this Product is IP64 (IEC).

The degree of protection for other models in the E3Z Series is

IP67.

Dimensions

Sensors

Accessories (Order Separately)

Mounting Brackets

Refer to E39-L for details.

Sensor I/O Connectors

Refer to XS3F and E3Z (E39-ECON

) for details.

1234

E39-ECON@M

E39-ECONW@M

1234

Pin arrangement

Note: Pin 2 of 1-axis models is not used.

Classifi-

cation

Wire

color

Connector

pin No.

Application

1-axis

models

2-axis

models

Brown 1 Power supply (+V)

White 2 ---

Output 2 (S2)

Blue 3 Power supply (0 V)

Black 4 Output

Output 1 (S1)

Brown

White

Blue

Black

Wire color

XS3F-M421-402-A

XS3F-M421-405-A

XS3F-M422-402-A

XS3F-M422-405-A

e-CON connectorM8 connector

WARNING Precautions for Correct Use

(Unit: mm)

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Operation

mode selector

* On the other side

Note: Both 1 and 2-axis models

have S1; only 2-axis models

have S2.

*S1 output: Black

*S2 output: White

Operation Indicator (orange)

Two, 4.5 dia.

Optical axis S1 *

Optical axis S2 *

7.5

919

10.5

4-dia. vinyl-insulated round cable

with 3 or 4 conductors (Conductor

cross section: 0.2 mm2 (AWG24),

Insulator diameter: 1.1 mm),

Standard lengths: 2 m, 0.5 m

4 dia. vinyl-insulated round cable with 3 or

4 conductors, Standard length: 0.3 m

Pre-wired Connector Models

(E3Z-G@@@-M3J)

e-CON Pre-wired Connector Model

4 dia. vinyl-insulated round

cable with 3 or 4 conductors,

Standard length: 0.3 m, 0.5m,

and 2m

Connector: 37104-3122-000FL

(made by Sumitomo 3M)

5.9

15.6

E3Z-G61

E3Z-G62

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2009.5

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/