SURFACE MOUNT DISPLAY KPSC03-107 Features SUPER BRIGHT YELLOW Description 0.3 INCH DIGIT HEIGHT. The Super Bright Yellow source color devices are made with LOW CURRENT OPERATION. DH InGaAlP on GaAs substrate Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD0153 REV NO: V.5 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-107 Iv (ucd) @ 10mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) WHITE DIFFUSED Description Min. Typ. 8000 35400 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0153 REV NO: V.5 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 2 OF 4 Super Bright Yellow KPSC03-107 SPEC NO: DSAD0153 REV NO: V.5 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 3 OF 4 KPSC03-107 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0153 REV NO: V.5 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 4 OF 4