23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com L200CWPB3KB-15D 468nm Pure Blue 5mm, Dome, 8.6mm Height 15 viewing angle __._ lumens per Watt (If = 20mA, Ta = 25C) DWG BY: LL / JAG 09-18-06 CHK BY: PL 09-27-06 QA: __ __-__-__ MFG: __ __-__-__ REVISION -- 09-18-06 Part No. L200CWPB3KB-15D DWG NO. DSDC0469 Page 1 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Features: * * * * High intensity 5mm diameter package Tinned leads Pb-free Package Dimensions: Part No. Chip Material Lens Color Emission Color L200CWPB3KB-15D InGaN Water Clear Super Bright Blue Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm (.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm (.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. 6. Precautions for ESD: Static electricity and surge can damage the LED. It is recommended to use a wristband or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. Part No. L200CWPB3KB-15D DWG NO. DSDC0469 Page 2 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Absolute Maximum Ratings at Ta=25C Parameter MAX. Unit Power Dissipation 80 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 20 mA Derating Linear From 50C 0.4 mA/C Reverse Voltage 5 V Electrostatic Discharge (ESD) 150 V Operating Temperature Range -30C to +80C Storage Temperature Range -40C to +100C 260C for 5 Seconds Lead Soldering Temperature[4mm(.157") From Body] Electrical Optical Characteristics at Ta=25C Parameter Luminous Intensity Symbol IV Min. Typ. Max. Unit Test Condition 3300 4500 --- mcd IF=20mA (Note 1) 15 --- Deg (Note 2) Viewing Angle 2 1/2 Peak Emission Wavelength p --- 460 --- nm IF=20mA Dominant Wavelength d --- 468 --- nm IF=20mA (Note 3) Spectral Line Half-Width - --- 28 --- nm IF=20mA Forward Voltage VF --- 3.2 4.0 V IF=20mA Reverse Current IR --- --- 50 A VR=5V SCP --- --- --- cd IF=20mA Lumens --- --- --- lm IF=20mA Radiant Intensity Ie --- --- mW/sr IF=20mA --- 62 Chromaticity Coordinates x: ~0.14 y: ~0.05 IF =20mA Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (d) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Forward voltage measurement allowance is: 0.1V 5. Luminous Intensity Measurement Allowance is 10% Part No. L200CWPB3KB-15D DWG NO. DSDC0469 Page 3 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) S p ec tral R ad ian ce ( P ea k @ 468 nm) 1. 0 Normalized Response 0. 8 0. 6 0. 4 0. 2 0. 0 38 0 40 0 420 440 460 480 500 52 0 54 0 560 580 600 620 640 660 680 Wavelength (nm) Forward Current vs Forward Voltage Forward Current IF(mA) 35 30 25 20 15 10 5 0 2.5 2.7 2.93 .13 .3 3.5 3.73 .94 .14 .3 4.5 Forward Voltage VF(V) Relative L um in ous In tensity vs F orw ard Curre nt Relative Intensity (LOP@20mA=1) 3 2. 5 2 1. 5 1 0. 5 0 0 5 10 15 20 25 30 35 Forw ard C urre nt IF(m A) Beam Pattern Forw ard Current Derating Curve 0 -30 30 60 -60 -90 1.0 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.0 90 Forward Current IF(mA) 60 L200CWPB3KB-15D 40 30 20 10 0 0 Relative Intensity (LOP@M AX=1) Part No. 50 DWG NO. 10 20 30 40 50 DSDC0469 60 70 80 90 Page Ta (C) 4 of 4