DSUBMINIATURE CONNECTOR J SERIES Solder pot plug and socket 01 SOLDER POT PLUG AND SOCKET Solder pot socket Solder pot plug Features --------------------------------------------------------- * The socket contacts are formed by high-speed stamping presses to obtain the advantages of cold working. They are therefore highly elastic, which in turn ensures reliable connection even after many mating cycles. * The dimples in the plug shell ensure continuity between it and the socket shell, thus providing complete shielding. Standards ---------------------- 0 Recognized E60389 1Certified LR20812 * Costs are kept low by selective gold plating the contacts. * The solder cup portions of the contacts are tin-plated for easy soldering. * Insulator housings are made of a heat-resistant glass-filled PBT resin. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Specifications ----------------------------------------------------- Materials Connector Model number identification Part name Material and Finish Contact Brass, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) tin-plated product: Copper-undercoated, tin-plated (reflow treatment) Insulator Glass-filled PBT, UL94V-0, black Plug Shell Steel, copper-undercoated, nickel-plated Contact Phosphor bronze, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) tin-plated product: Copper-undercoated, tin-plated (reflow treatment) Insulator Glass-filled PBT, UL94V-0, black Shell Steel, copper-undercoated, nickel-plated Socket Characteristics Current rating 3A, AC, DC (2A for 37-circuits) Voltage rating 250V AC, DC Temperature range -40C to +85C (including temperature rise in applying electrical current) Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage 1,000V AC/minute Note: Contact JST for details. 1 J E Z - 9 P - 12 - 3 * Series name * Shell size: E, A, B ,C * Wire connection style: Z ... Solder pot type * Number of circuits: 9, 15, 25, 37 * Connector style: P ... Plug, S ... Socket * Finish Blank ... Gold-plated (flash) 12 ... 0.2micron gold-plated 13 ... 0.4micron gold-plated 14 ... 0.76micron gold-plated 90 ... Tin-plated (reflow treatment) * Plating specification of shell: 3 ... Copper-undercoated, nickel-plated Note: 1. The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C 2. Contact JST for special plating requirements. D SUBMINIATURE CONNECTOR J SERIES Plug 10 A 2.84 8.35 12.55 3.05 B C (5.95) (10.72) Dimensions (mm) Model No. Circuits Gold-plated Tin-plated A B C Qty / box JEZ-9P-3 JEZ-9P-90-3 16.92 24.99 30.80 100 15 JAZ-15P-3 JAZ-15P-90-3 25.25 33.32 39.14 100 25 JBZ-25P-3 JBZ-25P-90-3 38.97 47.04 53.04 50 37 JCZ-37P-3 JCZ-37P-90-3 55.43 63.50 69.32 50 9 RoHS compliance Gold-plated products display (LF)(SN) on a label. Socket 10 A 2.84 7.9 12.55 3.05 B C (6.18) (10.9) Dimensions (mm) Model No. Circuits Gold-plated Tin-plated A B C Qty / box JEZ-9S-3 JEZ-9S-90-3 16.34 24.99 30.80 100 15 JAZ-15S-3 JAZ-15S-90-3 24.67 33.33 39.14 100 25 JBZ-25S-3 JBZ-25S-90-3 38.38 47.04 53.04 50 37 JCZ-37S-3 JCZ-37S-90-3 54.84 63.50 69.32 50 9 RoHS compliance Gold-plated products display (LF)(SN) on a label. 2 DSUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket 01 RIGHT ANGLE THROUGH-HOLE PLUG AND SOCKET Right angle through-hole socket (with rectangular lock screw blocks) Right angle through-hole plug (with hexagonal lock screw blocks) Right angle through-hole socket (with bail lock) Features --------------------------------------------------------- * The socket contacts are made by high-speed stamping presses. This promotes the uniform elasticity of the twin-contact mating sections and therefore ensures reliable contact even after repeated mating cycles. The solder tails are U-shaped for extra strength. * Costs are minimized by selective gold plating, high speed stamping presses, and completely automated assembly. 3 * To ensure complete shielding, a wide variety of grounding adapters are available so that the sockets can be grounded to different kinds of supporting structures. * Metric, inch or other lock screw blocks are available for fastening mating plugs. D SUBMINIATURE CONNECTOR J SERIES Specifications ----------------------------------------------------- Materials Characteristics Part name Plug Material and Finish Brass, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) tin-plated product: Copper-undercoated, tin-plated (reflow treatment) Contact Socket Phosphor bronze, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) tin-plated product: Copper-undercoated, tin-plated (reflow treatment) Insulator Glass-filled PBT, UL94V-0, black Shell Steel, copper-undercoated, nickel-plated Hexagonal lock screw block Steel, copper-undercoated, nickel-plated Rectangular lock screw block Zinc, copper-undercoated, nickel-plated Grounding adapter having a 3.2mm dia. hole Steel, copper-undercoated, nickel-plated Grounding adapter having an M3 tapped hole Grounding adapter having a spring lock lever Spring locks Bail lock Brass, nickel-undercoated, tin/copper alloy-plated Stainless steel Current rating 3A, AC, DC (2.0A AC, DC for 37-circuits) Voltage rating 250V AC, DC Temperature range -40C to +85C (including temperature rise in applying electrical current) Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage 1,000V AC/minute Applicable PC board thickness 1.6mm Note: Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Accepts bail locks Model number identification J E Y - 9 S - 1A 3 A 12 S1 * Series name * Shell size: E, A, B ,C * Wire connection style: Y... Right angle through-hole style * Number of circuits: 9, 15, 25, 37 * Connector style: P ... Plug, S ... Socket * Connector construction/Dimensions: Standard J series * Types of grounding adapters 0 ... Without grounding adapters 1 ... With grounding adapters having a 3.2mm dia. hole 2 ... With grounding adapters having an M3 thread 3 ... With grounding adapters having a spring lock device (1) 4 ... With grounding adapters having a spring lock device (2) * Types of lock screw blocks A ... With hexagonal lock screw blocks having a No. 4-40 UNC inch thread B ... With hexagonal lock screw blocks having an M2.6 thread C ... With rectangular lock screw blocks having an M2.6 thread D ... Without lock screw blocks E ... Without lock screw blocks, but with grounding adapters having a 3.05mm dia. hole F ... Without lock screw blocks, but with grounding adapters having a No. 4-40UNC inch thread G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread H ... Without lock screw blocks, but with grounding adapters having an M3 thread * Finish Blank ... Gold-plated (flash) 13 ... 0.4micron gold-plated 90 ... Tin-plated (reflow treatment) 12 ... 0.2micron gold-plated 14 ... 0.76micron gold-plated * Bail locks Blank...Without bail locks S or S1...With bail locks S2...With bail locks (with addition of spring characteristic) Note: 1. The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C 2. Contact JST for special plating requirements. 3. Contact JST for the Socket with bail locks. (Not UL/CSA approved.) 4 D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug Type A Type B 10 A D 2.84 2.84 8.35 12.55 H 3.2 With hexagonal lock screw blocks(H:6.3mm) having a No.4-40UNC inch thread 0.75 0.6 B C (5.95) E (18.6) With hexagonal lock screw blocks(H:6.3mm) having an M2.6 thread H: Height of the lock screw block (for Types A, B & C) Model No. Circuits gold-plated plug tin-plated plug Dimensions (mm) A B C D E Q'ty / box JEY-9P-1A** JEY-9P-1A**90 16.90 24.99 30.80 8.1 9.52 100 15 JAY-15P-1A** JAY-15P-1A**90 25.25 33.33 39.14 8.1 9.52 100 25 JBY-25P-1A** JBY-25P-1A**90 38.97 47.04 53.00 8.2 9.62 50 9 <Gold-plated product> RoHS compliance This product displays (LF)(SN) on a label. <Tin-plated product> *1, 2, 3 ... RoHS compliance <Tin-plated product> *4, 5 ... RoHS compliance This product displays (LF) on a label. Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. Note: For example, if a 9-circuit gold-plated (flash) plug with hexagonal lock screw blocks having a No.4-40UNC inch Note:thread and without grounding adapters is required, specify the model number as JEY-9P-1A0A. No.4-40UNC M2.6 *1 Without grounding adapters 0A 0B 1A 1B 2A 2B 3A 3B *2 With grounding adapters with a 3.2mm dia. hole *3 With grounding adapters with an M3 thread *4 With grounding adapters with a spring lock device (1) *5 With grounding adapters with a spring lock device (2) 5 D SUBMINIATURE CONNECTOR J SERIES Type C Type D With rectangular lock screw blocks (H: 6.2mm) having an M2.6 thread Without lock screw blocks Type E Type G Type H Without lock screw blocks E: Grounding adapter has no thread. F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) Use a lock screw block of Model number JFS-( )S-C1N. M2.6 Type F 3.05 *1: No.4-40UNC inch thread *2: Model number JFS-4S-( )1W(M) No.4-40UNC *1: M2.6 thread *2: Model number JFS-2.6S-( )1W(M) M2.6 *1: M3 thread *2: Model number JFS-3S-( )1W(M) M3 0C 0D 1C 1D 1E 1F 1G 2C 2D 2E 2F 2G 3C 3D 3E 3F 3G 4H 6 D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole socket Type A Type B 10 A 2.84 D 3.2 2.84 7.9 12.55 H 0.76 With hexagonal lock screw blocks(H: 6.3mm) having a No.4-40UNC inch thread 0.6 B C 6.18 E (18.8) H: Height of the lock screw block (for Types A, B & C) Circuits Dimensions (mm) Model No. gold-plated socket tin-plated socket A B C D E Q'ty / box JEY-9S-1A** JEY-9S-1A**90 16.34 24.99 30.81 8.1 9.52 100 15 JAY-15S-1A** JAY-15S-1A**90 24.67 33.32 39.14 8.1 9.52 100 25 JBY-25S-1A** JBY-25S-1A**90 38.38 47.04 53.04 8.2 9.62 50 37 JCY-37S-1A** JCY-37S-1A**90 54.84 63.50 69.32 8.2 9.62 50 9 With hexagonal lock screw blocks(H: 6.3mm) having an M2.6 thread <Gold-plated product> RoHS compliance This product displays (LF)(SN) on a label. <Tin-plated product> *1, 2, 3 ... RoHS compliance <Tin-plated product> *4, 5 ... RoHS compliance This product displays (LF) on a label. Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, Note:if a 9-circuit gold-plated (flash) socket with hexagonal lock screw blocks having a No.4-40UNC inch thread and Note:without grounding adapters is required, specify the model number as JEY-9S-1A0A. No.4-40UNC M2.6 *1 Without grounding adapters 0A 0B 1A 1B 2A 2B 3A 3B *2 With grounding adapters with a 3.2mm dia. hole *3 With grounding adapters with an M3 thread *4 With grounding adapters with a spring lock device (1) *5 With grounding adapters with a spring lock device (2) 7 D SUBMINIATURE CONNECTOR J SERIES Type C Type D With rectangular lock screw blocks (H: 6.2mm) having an M2.6 thread Without lock screw blocks Type E Type G Type H Without lock screw blocks E: Grounding adapter has no thread. F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) Used a lock screw block [model number JFS-( )S-C1N] 3.05 M2.6 Type F *1: No.4-40UNC inch thread *2: Model number JFS-4S-( )1W(M) No.4-40UNC *1: M2.6 thread *2: Model number JFS-2.6S-( )1W(M) M2.6 *1: M3 thread *2: Model number JFS-3S-( )1W(M) M3 0C 0D 1C 1D 1E 1F 1G 2C 2D 2E 2F 2G 3C 3D 3E 3F 3G 4H 8 D SUBMINIATURE CONNECTOR J SERIES 5.490.05 2.740.05 9.600.05 6.860.05 15-1.0 0.1 0 0.05 4.11 2.840.05 0.1 0 2.840.05 9-1.0 (15 circuits) 9.0max. with bail locks:7.5max. (9 circuits) 1.370.05 9.0max. with bail locks:7.5max. PC board layout (viewed from component side) 2-3.20.1 2-3.20.1 1.370.05 2.740.05 5.490.05 PC board edge PC board edge 8.230.05 0.05 4.11 33.320.15 24.990.15 (25 circuits) (37 circuits) 24.840.05 22.100.05 19.330.05 16.560.05 0.05 16.56 13.820.05 8.280.05 37-1.0 0.1 0 5.540.05 2.770.05 9.0max. with bail locks:7.5max. 2.770.05 11.050.05 2.840.05 25-1.0 5.540.05 2.840.05 8.280.05 0.1 0 9.0max. with bail locks: 7.5max. 13.820.05 11.050.05 2-3.20.1 2-3.20.1 1.400.05 1.400.05 4.140.05 0.05 4.14 6.910.05 PC board edge 6.910.05 PC board edge 9.680.05 9.680.05 12.420.05 12.420.05 15.190.05 0.05 15.19 47.040.15 17.960.05 20.700.05 23.470.05 63.500.15 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Panel layout Mounting on the rear side Mounting on the front side A B C 2-3.20.1 4-1.6R 10 A0.15 B0.2 C0.2 9 24.99 20.6 12.0 15 33.32 28.8 12.0 25 47.04 42.6 12.0 37 63.50 59.0 12.0 Circuits The connector can be mounted either on the front side or on the rear side of the panel as shown above. Use M2.5 or M2.6 screws for installation. 9 Note: The dimensions above should serve as a guideline. Contact JST for details. DSUBMINIATURE CONNECTOR J SERIES Straight through-hole plug and socket 01 STRAIGHT THROUGH-HOLE PLUG AND SOCKET Straight through-hole plug (with hexagonal lock screw blocks) Straight through-hole socket (without lock screw blocks, but with grounding adapters having a No.4-40UNC inch thread) Features --------------------------------------------------------- * The roots of the contact leads are covered to prevent flux from rising into the connector during soldering. 6.0 * Three standard types are available with different dimensions between the flange and solder tail: 6mm, 9mm, and 12mm. * A grounding adapter with a spring lock device allows the connector to be temporarily secured onto the printed circuit board so that the connector can be soldered easily. 0 Recognized E60389 1Certified LR20812 9.0 Standards ---------------------- 12.0 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 10 D SUBMINIATURE CONNECTOR J SERIES Specifications ----------------------------------------------------- Materials Characteristics Current rating 3A AC, DC Voltage rating 250V AC, DC Plug Brass, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Temperature range -40C to +85C (including temperature rise in applying electrical current) Contact resistance Socket Phosphor bronze, gold-plated product: Nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Insulator Glass-filled PBT, UL94V-0, black Withstanding voltage 1,000V AC/minute Shell Steel, copper-undercoated, nickel-plated Applicable PC board thickness 1.6mm Heaxagonal lock screw block Steel, copper-undercoated, nickel-plated Part name Material and Finish Contact Grounding adapter with spring lock device Spring lock *Contact JST for details. Cutting product Brass, nickel-undercoated, tin/copper alloy-plated Stamping product Brass, tin-plated (reflow treatment) Bail locks Stainless steel Accepts bail locks Straight through-hole plug Type A 10 H H D 3.5 2.7 D 3.5 H 2.7 D 3.5 2.7 B C 7.6 2.84 2.84 8.35 12.55 0.5 A 5.95 6.0 3.2 (15.04) 5.95 9.0 (18.04) 3.2 5.95 12.0 (21.04) 3.2 With hexagonal lock screw blocks(H:6.3mm) having a No.4-40UNC inch thread H: Height of the lock screw block (for Types A, B & J) Circuits 9 25 Dimension between flange and solder tail (mm) Model No. Gold-plated (flash) Plug Dimensions (mm) Gold-plated 0.76micron 6 JES-9P-2A** JES-9P-2A**14 9 JES-9P-3A** JES-9P-3A**14 12 JES-9P-4A** JES-9P-4A**14 6 JBS-25P-2A** JBS-25P-2A**14 9 JBS-25P-3A** JBS-25P-3A**14 12 JBS-25P-4A** JBS-25P-4A**14 A B C D Q'ty / box 16.90 24.99 30.8 2.4 100 38.97 47.04 53.0 2.5 50 RoHS compliance This product displays (LF)(SN) A on a label. Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a 9-circuit gold-plated (flash) plug with hexagonal lock screw blocks having a No. 4-40UNC inch thread and with grounding adapters whose dimension between flange and solder tail is 6.0mm is required, specify the model number as JES-9P-3A3A. 6.0 mm type With grounding adapters with a spring lock device 11 9.0 mm type No.4-40UNC 12.0 mm type 3A D SUBMINIATURE CONNECTOR J SERIES Model number identification J B S - 25 P - 2A 3 F 14 S1 * Series name * Shell size: B, E * Wire connection type: S ... Straight through-hole type * Number of circuits: 9, 25 * Connector type: P ... Plug S ... Socket * Connector construction/dimensions: 2A ... 6.0 mm from flange to solder tail 3A ... 9.0 mm from flange to solder tail 4A ... 12.0mm from flange to solder tail * Types of grounding adapter: 3 ... Grounding adapter with a spring lock device (Cutting product), 7 ... Grounding adapter with a spring lock device (Stamping product) * Types of lock screw block: A ... With hexagonal lock screw blocks having a No. 4-40UNC inch thread B ... With hexagonal lock screw blocks having an M2.6 thread F ... Without lock screw blocks, but with grounding adapters having an No.4-40UNC inch thread * Finish of mating part Blank ... Gold-plated (flash) 13 ... 0.4micron gold-plated 12 ... 0.2micron gold-plated 14 ... 0.76micron gold-plated G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread H ... Without lock screw blocks, but with grounding adapters having an M3 thread J ... With hexagonal lock screw block having an M3 thread 90 ... Tin-plated (reflow treatment) * Bail locks Blank...Without bail locks S or S1...With bail locks (bent oval type), S2...With bail locks (with addition of spring characteristic, bent oval type) S3...With bail locks (with addition of spring characteristic, Diamond type), S5...With bail locks (with addition of spring characteristic, straight oval type) Note: 1. In the J Series, the number of circuits is determined by the shell size: 9 circuits for E and 25 circuits for B. 2. Contact JST for special plating requirements. 3. Contact JST for the dimensions between the flange and solder tail other than those listed above. 4. Grounding adapters that can secure printed circuit boards are also available. 5. Contact JST for the Receptacle with spring lock devices. (Not UL/CSA approved.) Type B With hexagonal lock screw blocks (H: 6.3mm) having an M2.6 thread M2.6 Type F Type H Without lock screw blocks F, G, H: Grounding adapters have a thread (*1) for securing separatelypurchased lock screw blocks (*2) *1: No.4-40UNC inch thread *2: Model number SFS-4S-( )1W(M) No.4-40UNC 3B Type G 3F *1: M2.6 thread *2: Model number SFS-2.6S-( )1W(M) M2.6 *1: M3 thread *2: Model number SFS-3S-( )1W(M) M3 3G Type J With hexagonal lock screw blocks (H: 6.3mm) having an M3 thread M3 3H 3J 12 D SUBMINIATURE CONNECTOR J SERIES Straight through-hole socket Type A 10 H 2.7 D H 2.7 D H 2.7 D 2.84 7.9 2.84 7.6 12.55 0.5 A B C 6.0 9.0 6.18 (18.38) 6.18 6.0 3.2 (15.38) 3.2 6.18 6.0 12.0 (21.38) 3.2 With hexagonal lock screw blocks(H:6.3mm) having a No.4-40UNC inch thread H: Height of the lock screw block (for Types A, B & J) Dimension between Cir- flange and solder tail cuits (mm) 9 25 Dimensions (mm) Model No. Gold-plated (flash) socket Gold-plated 0.76micron Tin-plated 6 JES-9S-2A** JES-9S-2A**14 9 JES-9S-3A** JES-9S-3A**14 12 JES-9S-4A** JES-9S-4A**14 6 JBS-25S-2A** JBS-25S-2A**14 JBS-25S-2A**90 9 JBS-25S-3A** JBS-25S-3A**14 JBS-25S-3A**90 12 JBS-25S-4A** JBS-25S-4A**14 Q'ty / box A B C D 16.34 24.99 30.8 2.4 100 38.38 47.04 53.0 2.5 50 <Gold-plated product> RoHS compliance This product displays (LF)(SN) A on a label. <Tin-plated product> RoHS compliance This product displays (LF) A on a label. Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a 9-circuit gold-plated (flash) socket with hexagonal lock screw blocks having a No. 4-40UNC inch thread and with grounding adapters whose dimension between flange and solder tail is 6.0mm is required, specify the model number as JES-9S-3A3A. 6.0 mm type 9.0 mm type No.4-40UNC 12.0 mm type With grounding adapters with a spring lock device 3A PC board layout (viewed from component side) (9-circuits) (25-circuits) 16.560.05 13.820.05 11.050.05 5.490.05 2.740.05 2-3.050.05 1.370.05 25-1.0 0.1 0 5.540.05 2.770.05 2.840.05 9-1.0 0.1 0 2.840.05 8.280.05 2-3.050.05 1.400.05 4.140.05 4.110.05 24.990.05 6.910.05 9.680.05 12.420.05 15.190.05 47.040.05 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 13 D SUBMINIATURE CONNECTOR J SERIES Type B Type F With hexagonal lock screw blocks (H: 6.3mm) having an M2.6 thread Without lock screw blocks M2.6 Type G Type H Type J With hexagonal lock screw blocks (H: 6.3mm) having an M3 thread F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) *1: No.4-40UNC inch thread *2: Model number SFS-4S-( )1W(M) No.4-40UNC 3B *1: M2.6 thread *2: Model number SFS-2.6S-( )1W(M) *1: M3 thread *2: Model number SFS-3S-( )1W(M) M2.6 3F M3 M3 3G 3H 3J Panel layout A B 0.1 C 2-3.2 4-1.6R 10 A0.15 B0.2 C0.2 9 24.99 20.6 12.0 25 47.04 42.6 12.0 Circuits Note: The dimensions above should serve as a guideline. Contact JST for details. 14 DSUBMINIATURE CONNECTOR J SERIES Crimp style plug and socket 01 CRIMP STYLE PLUG AND SOCKET Crimp style plug Crimp style socket Pin contact Socket contact Features --------------------------------------------------------- * The contacts of this plug are formed by high-speed stamping presses into continuous strips that can be automatically fed into our compact crimping machines. Much less time is required to assemble CRT and RS-232C round cables using this plug than when soldering connections. * The contacts in this connector are selectively gold-plated. Moreover, JST's advanced technological knowledge and experience are fully utilized to significantly reduce production costs. * The dimples in the connector shell provide the ground connection and are important factors in preventing electromagnetic interference. The contact has a lance that can be visually checked during assembly. This assures accurate assembly and reduces defects. Specifications ----------------------------------------------------- Materials Connector Model number identification Part name Contact Plug Brass, gold-plated product: Nickel-undercoated, Mating part; gold-plated Crimping part; tin-plated (reflow treatment) tin-plated product: tin-plated (reflow treatment) Insulator Glass-filled PBT, UL94V-0, black Shell Steel, copper-undercoated, nickel-plated Phosphor bronze, nickel-undercoated, Mating part; gold-plated Crimping part; tin-plated (reflow treatment) Contact Socket Material and Finish Insulator Glass-filled PBT, UL94-0, black Shell Steel, copper-undercoated, nickel-plated Contact * Series name P 2 1 40 * Product shape: S ... Chain, B ... Loose piece * Type of contact: P ... Pin contact, S ... Socket contact * Applicable wire: 1 ... AWG #24 to #20, 2 ... AWG #28 to #24 * Material: 1 ... Brass(Pin contact), 3 ... Phosphor bronze(Socket contact) * Finish 40 ... Gold-plated (flash), 42 ... 0.2micron gold-plated 43 ... 0.4micron gold-plated, 44 ... 0.76micron gold-plated, 90 ... Tin-plated (reflow treatment) Note: Contact JST for special plating requirements. Housing * Series name Characteristics J - S J E C - 9 P - 3 * Shell size: E, A, B ,C Current rating 3A, AC, DC (2A for 37-circuits)(AWG #20) Voltage rating 250V AC, DC Temperature range -40C to +85C (including temperature rise in applying electrical current) Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage 1,000V AC/minute * Wire connection style: C ... crimp style * Number of circuits: 9, 15, 25, 37 * Connector style: P ... Plug, S ... Socket * Plating specification of shell: 3 ... nickel-plated Note: The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C Note: Contact JST for details. Standards -------------------------------------------------------- 0 Recognized E60389 1Certified LR20812 15 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. D SUBMINIATURE CONNECTOR J SERIES Pin contact (for plug housing) Socket contact (for socket housing) 15.3 1.9 1.9 16.3 3.6 4.25 3.6 1.0 1.4 5.8 Model No. Applicable wire Pin contact Socket contact Qty / reel lnsulation O.D. (mm) AWG # Gold-plated Tin-plated Gold-plated J-SP1140 J-SP1190 J-SS1340 # 24# 20 1.11.8 J-SP2140 J-SP2190 J-SS2340 # 28# 24 0.91.3 10,000 RoHS compliance Gold-plated products display (LF)(SN) on a label. Plug housing Socket housing 10 10 B C Circuits B C (5.95) (10.8) Dimensions (mm) Model No. 3.05 A B C Qty / box Circuits Model No. (10.7) 7.0 A 7.0 2.84 8.35 12.55 (10.7) 12.55 3.05 2.84 7.9 A 6.18 (10.9) Dimensions (mm) A B C Qty / box JEC-9P-3 16.92 24.99 30.80 100 9 JEC-9S-3 16.34 24.99 30.80 100 15 JAC-15P-3 25.25 33.32 39.14 100 15 JAC-15S-3 24.67 33.33 39.14 100 25 JBC-25P-3 38.97 47.04 53.04 50 25 JBC-25S-3 38.38 47.04 53.04 50 37 JCC-37P-3 55.43 63.50 69.32 50 9 RoHS compliance RoHS compliance Crimping machine, Applicator Contact Crimping machine Crimp applicator J-SP1*** J-SS1*** AP-K2N J-SP2*** J-SS2*** Applicator Dies Crimp applicator with dies MKS-L MK/J-SP/SS1 *MKS-SC SC/J-SP/SS1 APLMK J-SP/SS1 APLSC J-SP/SS1 MKS-L MK/J-SP/SS1 APLMK J-SP/SS1 *MKS-SC SC/J-SP/SS1 APLSC J-SP/SS1 MKS-L MK/J-SP/SS2 APLMK J-SP/SS2 *MKS-SC SC/J-SP/SS2 APLSC J-SP/SS2 MKS-L MK/J-SP/SS2 APLMK J-SP/SS2 *MKS-SC SC/J-SP/SS2 APLSC J-SP/SS2 Note: *Strip-crimp applicator 16 D SUBMINIATURE CONNECTOR J&JK SERIES Accessories/EMI prevention shielding cover ( J cover) 0 J COVER Features ----------------------- J cover * This shielding cover is made of steel, formed by our advanced stamping technology, and nickel-plated. Cover nut Cover * The box-shaped cover completely encloses such EMI radiating areas as the connections between the connector and wires. The result is a superior shielding effect. * To install the shielding cover, simply align and press the upper and lower cover elements, then tighten the nuts. It then securely grips the round cables. * This cover is so compact, light and sturdy, that it can be used to cover the connectors of any input/output cable. Moreover, it is attractive in appearance. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 Applicable cable dimensions Circuits J series 9 15 25 JK series 15 - - - 8.0 0.2 10.0 0.2 Cable outer diameter (mm) Shielding cover B W W Shielding cover A 7.0 0.2 37 16.4 L 16.6 6.0 L 10.0 10.0 3.0 J series JK series 9 15 J-SC9B 30.0 42.0 200 42.0 200 15 - J-SC15B 38.0 46.9 150 27.6 46.9 150 25 - J-SC25B 52.0 57.0 150 - 41.4 57.0 100 37 - J-SC37B 68.0 70.6 100 - 57.8 70.6 125 J-SC9A 15 JK-SC15A 19.4 15 J-SC15A - - 25 J-SC25A - 37 J-SC37A - L Material and Finish Steel, copper- undercoated, nickel-plated RoHS compliance Note: The cover of the JK series 15-circuit connector is the same as that of the J series 9-circuit connector, except for the number of circuits indicated. 1 Q'ty / box J series W 9 Dimensions (mm) L Model No. Q'ty / box Model No. Model No. Circuits Dimensions (mm) Circuits Circuits JK series W Material and Finish Steel, copper-undercoated, nickel-plated RoHS compliance Note: The cover of the JK series 15-circuit connector is the same as that of the J series 9-circuit connector. D SUBMINIATURE CONNECTOR J&JK SERIES E-ring 5.0 d D Cover nut Thickness 0.4 L 16.4 Circuits D Model No. 9 L d Q'ty / box J-CN915 13.6 7.2 19.0 25 J-CN25 16.4 8.4 25.0 1,000 37 J-CN37 18.8 10.4 28.0 1,500 15 1,000 Model No. Q'ty / box J-ER 5,000 Material Stainless steel RoHS compliance Note: The cover nuts, lock screws and E-rings are used with both the J and JK series connectors. Material Glass-filled, PBT, UL94V-0, black RoHS compliance Lock screw No.4-40UNC (Inch thread) M2.6 (Metric thread) M3 (Metric thread) M2.6 M3 4.5 4.5 4.5 No.4-40UNC 2.7 2.7 1.7 1.7 5.7 2.7 5.7 1.7 5.7 Type of screw Model No. Q'ty / box No.4-40UNC (Inch thread) J-SL-1C 5,000 M2.6 (Metric thread) J-SL-2C 5,000 M3 J-SL-3C 5,000 (Metric thread) Material and Finish Steel, copper-undercoated, nickel-plated RoHS compliance Use the following Model Nos. when ordering J-covers as a set. JK series J series Circuits Model No. Circuits Model No. J-C9-( )C 15 JK-C15-( )C 15 J-C15-( )C - - 25 J-C25-( )C - - 37 J-C37-( )C - - 9 Parts in one set Shielding cover A Shielding cover B Cover nut Lock screw E-ring Q'ty / box 1 pc. 1 pc. 1 pc. 2 pcs. 1 set 25 25 20 10 RoHS compliance Note: In the above lock screw model numbers, the number in parentheses indicates the type of screw-1: Inch thread (No.4-40UNC), 2: Metric thread (M2.6), 3: Metric thread (M3). 2 D SUBMINIATURE CONNECTOR J&JK SERIES J-cover assembly procedure J series JK series Shielding cover B Shielding cover B Lock screw 5 Lock screw E-ring E-ring 7 4 6 Connector Contact Cover nut Wire 1 2 Cover nut Crimp style plug Copper foil tape Copper foil tape Meshed wire Meshed wire Wire Shielding cover A Shielding cover A 3 C Lance Lance C B Assembly procedure Dimensions after assembly 1. Connect wires to the connector by soldering or crimping. 2. Fold back the braided shielding wire along the outside insulation and wind the copper foil tape around the shielding wire. 3. Install the connector into shielding cover A. 4. Screw the lock screws onto shielding cover B. 5. Install the E-rings. 6. Align shielding cover B with shielding cover A and press shielding cover B until it engages the lances of shielding cover A. 7. Tighten the cover nut until the predetermined position is reached. Note: For details of the J-cover assembly procedure, please refer to the processing specifications separately available. The shielding effect of the J-cover is critically dependent on proper assembly. 3 B 14.0 A 14.0 A Circuits Dimensions (mm) J series JK series A B C 9 15 24.99 49.0 13.6 15 - 33.32 53.0 13.6 25 - 47.04 64.5 16.4 37 - 63.50 78.5 18.9 D SUBMINIATURE CONNECTOR J&JK SERIES Accessories/EMI prevention overmolding cover MOLD COVER Features ----------------------- * This cover completely encloses all wire connections to the connector, and its braided wire crimp section ensures a reliable ground connection. The result is excellent shielding. * This cover is sturdy enough to withstand the high pressure necessary during overmolding. It can thus be finish-molded directly. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Applicable cable diameter Circuits J series JK series Cable O.D.(mm) 9 15 8.60.2 15 - 7.60.2 25 - 8.60.2 Note: Contact JST for cables other than those listed above. Ferrule Circuits J series JK series T L 925 15 D 15 - T L A 8.0 0.5 4.0 B 11.3 0.6 8.0 A 7.0 0.5 4.0 B 10.5 0.6 8.0 Mold cover B JK-MC15B-3 J-MC15B J-MC25B-4 39.2 38.0 17.4(25.6) J-MC25A-4 16.2(24.4) D RoHS compliance Mold cover A JK-MC15A-3 J-MC15A Dimensions (mm) Ferrule 18.0 18.0 18.0 18.0 *Dimensions in ( the J-MC15A. ) are those for 37.0(37.6) *Dimensions in ( the J-MC15B. 39.0 2.7 7.4 2.7 7.4 39.0 2.7 7.8 2.7 7.8 37.0(37.6) ) are those for RoHS compliance 4 D SUBMINIATURE CONNECTOR J&JK SERIES Mold cover assembly procedure Ferrule B Mold cover B Contact Crimp style plug Ferrule A Copper foil tape Braided wire Mold cover A Mold Thumb screw Mold cover assembly <Molded assembly> Note: Contact JST for thumb screws. Assembly procedure 1. Processing braided shielding wire Pass the cable through ferrule B and remove the insulation at the end of the cable. Install ferrule A and fold back the braided shielding wire along the outside insulation. Then wind the copper foil tape around the shielding wire. 3. Assembling the mold covers Align mold cover B with mold cover A and press mold cover B until it engages the lances of mold cover A. Install ferrule B over the cable holding section of the cover assembly and crimp ferrule B. This completes the assembly. 2. Connecting the wires to the contacts Connect the wires to the contacts by crimping and insert the contacts into the housing. Circuits J series JK series 15 9 - 15 - 25 Parts name Model No. Mold cover A JK-MC15A-3 Mold cover B JK-MC15B-3 Ferrule A JK-FL15A-8.0C Ferrule B JK-FL15B-11.3 Mold cover A J-MC15A Mold cover B J-MC15B Ferrule A J-FL15A-7.0C Ferrule B J-FL15B-10.5 Mold cover A J-MC25A-4 Mold cover B J-MC25B-4 Ferrule A JK-FL15A-8.0C Ferrule B JK-FL15B-11.3 RoHS compliance Crimping machine, Applicator Contact JK-FL15B-11.3 J-FL15B-10.5 5 Crimping machine Crimp applicator AP-K2N MKS-L-RG Applicator Dies Crimp applicator with dies MK/JK-MC15 APLMK JK-MC15 MK/J-MC15 APLSC JK-MC15 Material and Finish Steel, copper-undercoated, nickel-plated Copper, tin-plated Steel, copper-undercoated, nickel-plated Q'ty / box or bag 500 1,000 500 200 1,000 Copper, tin-plated Steel, copper-undercoated, nickel-plated Copper, tin-plated 500 250 1,000 500 D SUBMINIATURE CONNECTOR Accessories/Covers J SERIES 4.0 19.0 45.0 EMI SHIELDING ALUMINUM DIE-CAST COVER (for 25-circuit J series connectors) M2.6x 0.45 40.0 55.0 Features ----------------------- Model No. * This cover is made of aluminum die-cast . * The D subminiature connector and all its wire connections can be completely covered to provide excellent shielding. * This EMI shielding cover can be used together with the hexagonal and rectangular metric lock screws specified in JIS-C6361. This cover is ideally suited for RS-232C cable connectors. JCB-25EM Parts in one set Cover A - 1 pc. Cover B - 1 pc. Lock screw - 2 pcs. Cable clamp - 2 pcs. Cover screws and nuts - 2 pcs. for each Clamp screws - 2 pcs. 14.0 20.0 Cover material Qty / box Aluminum die-cast 10 RoHS compliance * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 40.0 55.0 Features ----------------------- Model No. * Molded plastic cover. * This cover can be used together with the hexagonal and rectangular metric lock screws specified in JIS-C-6361. * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. JCB-25M 4.0 19.0 45.0 JIS STYLE PLASTIC COVER (for 25-circuit J series connectors) M2.6x 0.45 Parts in one set Covers - 2 pcs. Lock screw - 2 pcs. Cable clamp - 2 pcs. Cover screws and nuts - 2 pcs. for each Clamp screws - 2 pcs. 14.0 20.0 Cover material Qty / box ABS resin 10 RoHS compliance 1 D J JH JK & KH SERIES SUBMINIATURE CONNECTOR Accessories/Lock screw block A varietly of accessories are available for the D subminiature connectors. LOCK SCREW BLOCK Hexagonal lock screw block (inch thread: No.4-40UNC) L L H 4.78 H No.4-40UNC No.4-40UNC No.4-40UNC Type B Type A Applicable series Dimension / Model No. Dimension L (mm) Model No. J series right angle throughJK series right hole type angle throughJK series hole type straight throughhole type 13.1 15.0 J series straight throughhole type JH series right angle throughhole type KH series right angle throughhole type 10.0 11.8 - - Dimension H (mm) Type Spring washer .. 1 pc. Nut ............ 1 pc. 5.5 JFS-4S-C1N KFS-4S-C1N JFS-4S-B1W KFS-4S-B1W SFS-4S-B1W HFS-4S-B1W 4.8 JFS-4S-C1W KFS-4S-C1W SFS-4S-C1W HFS-4S-C1W 5.5 JFS-4S-B1WM KFS-4S-B1WM SFS-4S-B1WM HFS-4S-B1WM 4.8 JFS-4S-C1WM KFS-4S-C1WM SFS-4S-C1WM HFS-4S-C1WM 5.5 Q'ty / box Attachment A Spring washer .. 1 pc. 2,000 Hexagonal lock screw & spring washer are integrated B RoHS compliance Hexagonal lock screw block (metric thread: M3) L 4.78 L H H M3 M3 Type A Applicable series Dimension / Model No. Dimension L (mm) J series right angle throughJK series right hole type angle throughJK series hole type straight throughhole type 13.1 JFS-3S-C1N Model No. RoHS compliance 1 15.0 KFS-3S-C1N JH series right angle throughJ series straight through- hole type KH series right hole type angle throughhole type 10.0 11.8 - - Dimension H (mm) Type KFS-3S-B1W SFS-3S-B1W HFS-3S-B1W 4.8 JFS-3S-C1W KFS-3S-C1W SFS-3S-C1W HFS-3S-C1W 5.5 JFS-3S-B1WM KFS-3S-B1WM SFS-3S-B1WM HFS-3S-B1WM 4.8 JFS-3S-C1WM KFS-3S-C1WM SFS-3S-C1WM HFS-3S-C1WM 5.5 Type B Attachment Q'ty / box Spring washer .. 1 pc. Nut ............ 1 pc. 5.5 JFS-3S-B1W M3 A Spring washer .. 1 pc. B Hexagonal lock screw & spring washer are integrated 2,000 D SUBMINIATURE CONNECTOR J JH JK & KH SERIES Hexagonal lock screw block (metric thread: M2.6) L 4.78 L H H M2.6 M2.6 M2.6 Type B Type A Applicable series Dimension / Model No. Dimension L (mm) Model No. J series right angle throughJK series right hole type angle throughJK series hole type straight throughhole type 13.1 15.0 J series straight throughhole type JH series right angle throughhole type KH series right angle throughhole type 10.0 11.8 - - Dimension H (mm) JFS-2.6S-C1N KFS-2.6S-C1N JFS-2.6S-B1W KFS-2.6S-B1W SFS-2.6S-B1W HFS-2.6S-B1W 4.8 JFS-2.6S-C1W KFS-2.6S-C1W SFS-2.6S-C1W HFS-2.6S-C1W 5.5 Type Spring washer .. 1 pc. Nut ............ 1 pc. 5.5 JFS-2.6S-B1WM KFS-2.6S-B1WM SFS-2.6S-B1WM HFS-2.6S-B1WM 4.8 JFS-2.6S-C1WM KFS-2.6S-C1WM SFS-2.6S-C1WM HFS-2.6S-C1WM 5.5 Qty / box Attachment A Spring washer .. 1 pc. B 2,000 Hexagonal lock screw & spring washer are integrated RoHS compliance Rectangular lock screw block (metric thread: M2.6) 12.5 1.2 M2.6 1.0 6.2 Model No. JFS-2.6R-N Attachment Spring washer - 1 pc. Set screw - 1 pc. 1.0 6.1 Qty / box 1,000 RoHS compliance 2 D SUBMINIATURE CONNECTOR J JH JK & KH SERIES Application examples of hexagonal lock screw blocks * The resulting total dimension from the connector flange to the top Total dimension 6.2 of the hexagonal lock screw block must be 6.2mm after Connector flange assembly. Grounding adapter with threads * The D subminiature connector can be installed on the Panel by simply tightening the hexagonal lock screw block together with grounding adapter, which has an identical thread to that of the F, G, and H types. Height of lock screw block 4.8 PC board Panel thickness 0.8 Spring washer thickness 0.6 DUST COVER (for receptacles) Type A Type Circuits J series JK series 9 15 A 9.6 18.0 J-DCES J-DCES-1 B 6.6 Model No. Qty / box 1,000 Material JDCES JST PA, UL94V-0, black RoHS compliance Type B 3.0 9.6 18.0 7.4 JDCES-1 JST 25.0 33.0 EXTRACTION TOOL With this tool, contacts (connected to wires by crimping) can be easily removed if they are improperly inserted into plug and receptacle housings. Applicable Connector JK series 3 Model No. DEJ-0.3 J series Plug KEJ-0.7 Receptacle KEJ-0.4