781P127X0800L - Dearborn Electronics, Inc.

electronics, inc

Filmlytics

Type 781P

1221 N. Highway 17/92

Longwood, FL 32750

Ph: (407) 695-6562

Fax: (407) 695-6889

Filmlytic

Film Capacitor Alternative to Aluminum Electrolytics

The new Filmlytic offers all the advantages of metalized film capacitor technology in values

and sizes that until now were only available from aluminum electrolytics. Dearborn specifical-

ly designed the Filmlytic capacitor series to provide a non-polar construction with greater

current density and higher over voltage protection; all in the same package dimensions and

terminations as standard electrolytics.

Not only are the Filmlytics available in higher voltage ratings, up to 1800 VDC, they have

vastly superior performance characteristics over the operating temperature range from -55C to

+85C. Their non-impregnated construction eliminates harmful electrolyte leakage making

them friendly to surrounding equipment and the environment. This dry construction and the

self-healing feature of metalized film electrodes, extends useful service life, improves

reliability, and provides for a long shelf life.

Maximize your power system design, specify Dearborn's Filmlytic in your products and

deliver improved reliability, longer life and superior performance to your customers today.

PHYSICAL CHARACTERISTICS —

Size: See Standard Ratings Table

Construction:

Dry, non-inductively wound metalized film

Case:

Aluminum case with plastic insulating sleeve

Terminals:

High current terminals mounted on a plastic deck

Marking:

Dearborn trademark, type or catalog number,

capacitance, tolerance and voltage

ELECTRICAL SPECIFICATIONS —

See Standard Ratings Table

Capacitance Tolerance

±20%, ±10%

Capacitance Change

±5% from –55°C to 85°C

Operating Temperature

-55°C to +85°C

Dissipation Factor

1.0% Maximum at 1kHz

DC Voltage Test

140% of rated voltage for 1 minute

Insulation Resistance

Measure at 500VDC after a 10 minute charge

At 25°C, 20,000 Megohm-Microfarads

At 85°C, 2,000 Megohm-Microfarads

Catalog Numbering System

781P 107 X9 800 L

TERMINAL HEIGHT. L=Low or H=High

DC V OLTA GE RATING. EXPRESSED IN VOLTS.

SEE STANDARD RATINGS CHART FOR VOLTAGE

CODE.

CAPACITANCE TOLERANCE. X0=20% X9=10%

CAPACITANCE. EXPRESSED IN PICOFARADS. THE FIRST TWO DIGITS ARE

SIGNIFICANT. THE THIRD IS THE NUMBER OF ZEROS FOLLOWING. SEE

STANDARD RATINGS FOR CODE.

DEARBORN TYPE NUMBER. IDENTIFIES THE BASIC CAPACITOR.

Height

H= 0.25" nominal

L= 0.125" nominal

3.00" nominal

1.25" nominal

0.344" Deep Min.

1/4-28

0.68" nominal

Capacitance Case Height in Inches Typical ESR dv/dt Max IRMS (Amps)*

µF Code (mΩ@ 100kHz) (V/µs) @70°C, 400Hz

600 VOLTS DC (CODE 600)

200 207 3.2 6.3 8.3 38.8

300 307 4.2 9.1 5.3 53.6

400 407 5.2 11.8 3.9 68.3

800 VOLTS DC (CODE 800)

120 127 3.2 8.0 10.3 29.4

190 197 4.2 11.1 6.6 42.5

260 267 5.2 13.9 4.8 56.1

900 VOLTS DC (CODE 900)

85 856 3.2 8.8 12.8 25.2

130 137 4.2 12.4 8.1 36.3

180 187 5.2 16.5 5.9 46.2

1000 VOLTS DC (CODE 1KO)

60 606 3.2 10.4 15.0 20.9

95 95 4.2 14.9 9.5 30.0

130 137 5.2 19.3 6.9 39.0

1200 VOLTS DC (CODE 1K2)

45 456 3.2 11.1 18.5 18.5

70 706 4.2 16.6 11.3 25.9

100 107 5.2 21.1 8.2 34.6

1300 VOLTS DC (CODE 1K3)

35 356 3.2 12.5 20.7 16.2

55 556 4.2 18.6 12.7 22.9

75 756 5.2 24.7 9.2 29.5

1500 VOLTS DC (CODE 1K5)

28 286 3.2 13.9 23.1 14.4

45 456 4.2 20.3 14.2 20.8

65 656 5.2 25.6 10.2 28.1

1800 VOLTS DC (CODE 1K8)

18 186 3.2 16.3 30.1 11.6

30 306 4.2 23.9 17.9 17.0

42 426 5.2 31.5 12.7 22.3

781P STANDARD RATINGS TABLE

Additional capacitance values and sizes available upon request

Coefficients for Ripple Current

Temperature 25°C 50°C 70°C

1.7x 1.4x 1x

Frequency 60Hz 120Hz 400Hz 1kHz

Voltage Rating

600, 800, 900 0.17x 0.35x 1x 1.58x

1000, 1200 0.14x 0.28x 1x 1.58x

1300, 1500 0.11x 0.22x 1x 1.58x

1800 0.08x 0.16x 1x 1.58x

* e.g. : Ripple current at 50°C, 120Hz for a 200µf 600VDC Filmlytic =1.4 x 0.35 x 38.8 = 19 Amps Max.

Quality Assurance Testing

INSPECTION: Prior to shipment, Filmlytics are 100% inspected for Capacitance value,

Dissipation and ESR values, DC Voltage Test, and Insulation Resistance. Sample inspection is

then performed to assure that the Filmlytic meets Dearborn’s exacting standards of workman-

ship and mechanical performance.

HUMIDITY RESISTANCE: When tested for 250 hours at 40°C and 95% relative humidity in

accordance with MIL-STD-202 Method 103B, Filmlytics shall not: exhibit visible damage,

change in capacitance value by more than 5% of the initial value, have an insulation resistance

value lower than 20% of the initial limit, or exhibit a 1KHz DF of greater than 2%.

LIFE TEST: When subjected to 110% of rated voltage at 85°C for 250 hours, Filmlytics shall

not: exhibit a permanent short or open, change in capacitance value by more than 3% of initial

value, have an insulation resistance value less than one third of the initial limit, or have a 1KHz

DF greater than 2.5%.

The information presented herein is believed to be accurate and reliable. However, Dearborn Electronics, Inc. assumes no responsibility for its

use; nor any infringements of patents or other rights of third parties may result from its use.

-10

-15

-20

Capacitance Change (%)

-5

Temperature (°C)

-75 -50 -25 0 25 50 75 100

Capacitance Change vs Temperature

Filmlytic

Aluminum

Electrolytic