3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: KA-3528APBC-A PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z SINGLE COLOR. The Blue source color devices are made with InGaN z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER on SiC Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. z AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic z IDEAL FOR BACKLIGHTING. glove when handling the LEDs. z PACKAGE : 1500PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO:DSAH5834 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1201002903 Selection Guide Part No. Dice KA-3528APBC-A Lens Type Blue (InGaN) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 18 60 120 WATER CLEAR Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAH5834 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1201002903 Blue SPEC NO:DSAH5834 APPROVED: WYNEC KA-3528APBC-A REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1201002903 KA-3528APBC-A Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO:DSAH5834 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1201002903