The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. SC Type Fiber Optic Connectors MU HSC Series SC FC Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. Harsh Environment JIS C 5973 (F04 type fiber optic connectors) IEC 61754-4 2. Plugs with strain relief boot Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical bend direction. The color of the boot identify the type of polishing: Blue: PC polishing Light purple: Advanced PC (AdPC) polishing Green: Angled PC polishing (APC) Other colors are also possible. 3. Zirconia Split Sleeve Adapter Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule. Attenuators 4. Duplex SC Type: Rigid Type Available in following types; H type - 8.5 mm spacing between the fibers, for high density applications. F type - 12.7 mm spacing between the fibers, low profile, for LAN applications. Refer to page 39 for further information. 5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards Floating mechanism with Duplex SC plug. It is also fully compatible with the HSCF fixed type. 6. Simplified Plugs and Receptacles. Terminators Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection. Refer to page 43 for further information. Applications LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other applications requiring reliable fiber optic connections. 25 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Product Specifications Ratings Operating temperature range Optical Characteristics MU Item Insertion Loss -25C to +70C Storage temperature range (SM) Test Method (IEC 61300) Wavelength 1310nm (LD) Specifications 0.5dB max. (PC, AdPC, APC) (GI) Wavelength 1310nm (LED) 0.3dB max. (PC) Wavelength 1310nm (LD) 22dB min. (PC) 60dB min. (APC) (SM) Return Loss (GI) Measured with corresponding connector. Harsh Environment Environmental Characteristics FC Mechanical Characteristics SC /force Extract zirconia gauge 2.499 0.0005 mm dia from split sleeve. Copper alloy split sleeve Zirconia split sleeve Cable retention (Straight pull) 89N tensile load for one minute. 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. Durability (cycles, mating/un-mating) 1000 times Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 981 m/s2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. Humidity (Temperature/ humidity- cycles) -10C to 65C, humidity: 90% to 96% 20 cycles Change of temperature -40C to +75C 42 cycles (Complies with Telcordia standard GR-326-CORE) Dry heat 960 hours at 85C Cold 960 hours at -25C Salt mist 48 hours in a 5% concentration of salt mist Part Attenuators Duplex plug Engagement force: 19.6 N max. Separation force: 19.6 N max. Engagement force: 39 N max. Separation force: 39 N max. Ferrule withdrawal force Materials Terminators 40dB min. (AdPC) 22dB min. (PC) Simplex plug Engagement and Separation 26 -25C to +70C Material Simplex plug housing Synthetic resin Spring Stainless steel Ferrule Zirconia Simplex adapter housing Synthetic resin or Zinc alloy 4-position adapter housing Synthetic resin 5-position adapter housing Synthetic resin Receptacle housing Zinc alloy Attenuator housing Zinc alloy Split sleeve Zirconia or Copper alloy Dust cap Synthetic resin 2N to 5.9N 2N to 3.9N 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. No significant corrosion. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Function diagram Simplex type Adapter-Panel Mounting SC type plug housing Strain relief type (For Cable Diameter: 2 mm & 3mm) MU Plastic Housing Products HSC-A3 HSC-A3-D1 HSC-A3-D2 Die Cast Housing Products HSC-A2 HSC-A2-D1 HSC-PH2-E1,E2,E5 HSC-PH3-B1,B2,B5 HSC-PH0.9-E1,E2,E5 Short length type (For Cable Diameter: 2mm) HSC-PH2-E1-A Short length type (For Cable Diameter: 3mm) Conversion adapter FC to SC - Screw Mounting SC 0.9 mm fiber Light weight type HSCJ-HRFCJ-B FC to SC - Panel Mounting HSCJ-HRFCJ-C ST to SC - Screw Mounting FC HSCJ-HSTJ-B HSC-PH3-A4 Receptacle Conversion adapter - FC jack to SC Plug HSCP-HRFCJ-1, 2 HSCP-HRFCJ-1AS, 2AS HSC-R1-B,R2-B Harsh Environment Simplified receptacle HSC-SR-1,D1 HSC-SR-2,D2 <Tool Insertion/Extraction Connectors> SC2 type plug housing Attenuators Strain relief (For Cable Diameter: 2 mm & 3mm) Adapter HSC2-PH2-E1,E2,E5 HSC2-PH3-B1,B2,B5 4-Position Adapter Panel Mounting type 0.9 mm fiber Type HSC2-4A HSC2-4A-D1 5-Position Adapter Panel Mounting type Short length type (For Cable Diameter: 2 mm) HSC2-5A HSC2-PH2-E1-A Terminators HSC2-PH0.9-E1,E2 Simplified receptacle Short length type (For Cable Diameter: 3mm) HSC2-PH3-A HSC2-8SR-1 HSC2-8SR-D1 27 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Duplex type MU <Plug Housings> <Adapters> F type Plug Housing (For Cable Diameter: 2mm&3mm) HSCF-2PH2-E1,E2 HSCF-2PH3-B1,B2 SC <Complies with ANSI Standard for adjustable Type> F type For Single mode (For Cable Diameter: 2mm&3mm) Panel Mounting HSCF-2A(P) HSCF-2A-D(P) HSCM-2SPH2-B1,B2 HSCM-2SPH3-B1,B2 For Multi mode (For Cable Diameter: 2 mm & 3mm) H type FC HSCM-2GPH2-B1 HSCM-2GPH3-B1 Snap - in HSCH-2A1(P) HSCH-2A1-D(P) H type Plug Housing (For Cable Diameter: 2 mm & 3mm) Screw Mounting HSCH-2A(P) HSCH-2A-D(P) Harsh Environment HSCH-2PH2-B1,B2 HSCH-2PH3-B1,B2 Attenuators Fixed attenuators For single mode For GI HSC-AT 11K-A** HSC-AT5S-B**A See Page 85 for details. Terminators Plug type Tool- Insertion/Removal Terminators HSC-TM-P1 HSC2-TM-P1 Receptacle type Tool Insertion/Removal HSC-TM-R1 See Page 89 for details. 28 HSC2-TM-R1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Simplex type MU Strain relief type 1.8 55 9 25 7.4 0.9 CL No. 704-0327-3-31 Fiber cable type HSC-PH2-E2(31) 704-0328-6-31 HSC-PH2-E5(31) 704-3108-6-31 HSC-PH3-B1(31) 704-0222-5-31 HSC-PH3-B2(31) 704-0223-8-31 HSC-PH3-B5(31) 704-3020-7-31 O2mm O3mm Light weight type (For 0.9mm fiber) Boot color Polishing type Outer jacket fixing Blue PC Light purple AdPC Green APC Blue PC Light purple AdPC Green APC SC Part Number HSC-PH2-E1(31) Glue Crimp 33 9 1.8 FC 25 7.4 0.9 Part Number CL No. HSC-PH0.9-E1(06) 704-0339-2-06 Blue Boot color HSC-PH0.9-E2(31) 704-0354-6-31 Light purple AdPC HSC-PH0.9-E5(31) 704-3104-5-31 Green APC PC Harsh Environment Short length type (For 2mm Cable) Polishing type 36.5 9 1.8 25 7.4 0.9 CL No. HSC-PH2-E1-A(31) 704-0464-4-31 Blue HSC-PH2-E2-A(31) 704-0480-0-31 Light purple AdPC Green APC HSC-PH2-E5-A 704-3124-2 Polishing type Attenuators Boot color Part Number Outer jacket fixing PC Glue Short length type (For 3mm Cable) 36.5 1.8 9 Terminators 25 7.4 0.9 Part Number CL No. HSC-PH3-A4(31) Boot color 704-0245-0-31 Blue HSC-PH3-A4(32) 704-0245-0-32 Light purple Polishing type PC AdPC Outer jacket fixing Crimp 29 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. MU Tool Insertion/Extraction Plug Housings Strain relief type 7.2 55 FC SC 6 Part Number CL No. HSC2-PH2-E1(31) 704-0329-9-31 HSC2-PH2-E2(31) 704-0330-8-31 HSC2-PH2-E5(31) HSC2-PH3-B1(31) HSC2-PH3-B2(31) 704-0227-9-31 HSC2-PH3-B5 704-3123-0 Fiber cable type Boot color Blue PC O2mm Light purple AdPC 704-3109-9-31 Green APC 704-0226-6-31 Blue PC Light purple AdPC Green APC O3mm Light weight type (For 0.9mm fiber) Polishing type Outer jacket fixing Glue Crimp 7.2 33 Harsh Environment 6 Part Number CL No. HSC2-PH0.9-E1(31) 704-0421-1-31 Blue HSC2-PH0.9-E2(31) 704-0422-4-31 Light purple Short length type (For 2mm Cable) Boot color Polishing type PC AdPC Attenuators 7.2 36.5 6 Part Number CL No. HSC2-PH2-E1-A 704-0482-6 Blue HSC2-PH2-E2-A 704-0481-3 Light purple Boot color Polishing type PC AdPC Outer jacket fixing Glue Short length type (For 3mm Cable) 7.2 Terminators 36.5 6 Part Number CL No. Boot color Polishing type Outer jacket attachment HSC2-PH3-A(31) 704-0015-0-31 Blue PC Crimp Note : Please contact HIROSE for other variations. 30 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Receptacles 15.2 12.2 M 15 12.8 O7 O3 MU O19 13.4 9 2-O2.3 Note: Designed for power meter sensors Part Number CL No. Remarks HSC-R1-B(05) 704-0022-6-05 For MM HSC-R2-B(05) 704-0023-9-05 For SM SC O1 (Hole diameter) O2.4990.0005 3 16 1.8 7.95 +0.05 0 FC 1.5 O4.6 For PC, AdPC and UPC OA+0.001 (Hole diameter) 0 Ferrules 0.125 HSC-F321-A1255(10) 704-0200-2-10 0.1255 HSC-F321-A126(10) 704-0071-1-10 0.126 1.8 O4.6 O1 16.15 8.095 +0.05 0 SM,MM Attenuators O2.4990.0005 For APC Applicable Fiber cable O1(Hole diameter) A dimension (Hole diameter) OA +0.001 0 CL No. 704-0070-9-10 Harsh Environment Part Number HSC-F321-A125(10) Part Number CL No. A dimension HSC-F391-A125 704-3101-7 0.125 HSC-F391-A126 704-3102-0 0.126 HSC-F391-A127 704-3103-2 0.127 SM Terminators (1)No gap design. Applicable Fiber cable Minimal gap:(0.1mm max.) (2)The entrance angle of the fiber has been set at 60 for easy fiber insertion. 60 fiber entrance angle 31 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Adapters - Panel Mounting SC adapters BPanel cutout 9.4 1.8 18 22 12.8 13 +0.5 0.5 27.4 3 180.1 MU SC/SC Plastic Housing 9.5 O2.3 CL No. 704-0092-1-51 704-0217-5-02 704-3007-9-06 Remarks Split sleeve Copper alloy Zirconia Zirconia PC,AdPC(Blue) APC(Green) BPanel cutout 9.4 1.8 FC 18 22 9.5 O2.3 Part Number HSC-A2(51) HSC-A2-D1(01) Harsh Environment +0.2 0.5 180.1 27.4 3 12.8 SC/SC Die Cast Metal Housing 2-M20.4 or 2-O2.4 Panel thickness: 1.6mm 13 +0.5 0.5 SC Part Number HSC-A3(51) HSC-A3-D1(02) HSC-A3-D2(06) 0.5 0.5 0.5 0.5 2-M20.4 or 2-O2.4 +0.2 0.5 Panel thickness: 1.6mm Split sleeve Copper alloy Zirconia CL No. 704-0020-0-51 704-0258-2-01 SC2 adapters BPanel cutout Attenuators 28.5 1.8 28.2 15 12.8 24 3 +0.2 0.5 SC/SC2 4-way adapter 13 +0.5 0.5 Panel thickness: 1.6mm Part Number HSC2-4A(51) HSC2-4A-D1(01) BPanel cutout SC/SC2 5-way adapter (for Multi-mode fiber) 35 35.3 +0.5 +0.5 1.8 15 12.8 Terminators 24 3 Split sleeve Copper alloy Zirconia CL No. 704-0024-1-51 704-0290-5-01 +0.5 13 +0.5 Panel thickness: 1.6mm Part Number HSC2-5A(51) 32 CL No. 704-0025-4-51 Split sleeve Copper alloy The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Conversion adapters FC / SC Screw Mounting BPanel cutout O9 +0.5 +0.5 MU 13.4 9 21.2 5.5 3.5 12.2 2-M20.4 or 2-O2.4 +0.2 +0.5 O19 12.8 M80.75 13.40.1 15 CL No. Split sleeve 704-0021-3-51 Copper alloy SC Part Number HSCJ-HRFCJ-B(51) BPanel cutout FC / SC Snap-in and/or Screw Mounting 9.4 2-M20.4 or 2-O2.4 +0.2 +0.5 FC 180.1 18 21.2 M80.75 +0.5 0.5 18 22 12.8 O9 O2.3 Panel thickness: 1.6mm Part Number CL No. Split sleeve HSCJ-HRFCJ-C(51) 704-0206-9-51 Copper alloy Harsh Environment ST / SC Screw Mounting BPanel cutout O19 13.4 9 +0.5 2-M20.4 or 2-O2.4 +0.2 +0.5 2-O2.2 13.4 0.1 .2 O8 1.2 2 O7 12.8 15 O9+0.5 14.7 13.7 Part Number CL No. Split sleeve HSCJ-HSTJ-B(51) 704-0102-3-51 Copper alloy Attenuators 28.4 Terminators 33 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FC / SC M80.75 9 12.8 MU 9.4 7.4 21 (1.8) 27.9 SC Part Number CL No. Split sleeve HSCP-HRFCJ-1(51) 704-0203-0-51 HSCP-HRFCJ-1AS(51) 704-0288-3-51 HSCP-HRFCJ-2(51) 704-0204-3-51 HSCP-HRFCJ-2AS(51) 704-0289-6-51 Polishing type Applicable Fiber cable PC Copper alloy AdPC PC AdPC GI-50/125 SM-9.5/125 The positions of SC guide key and FC guide slot will not be always aligned. (3.9) 32 13.7 Part Number Harsh Environment 7.4 O19 FC 19.5 15 FC / SC 9 12.8 CL No. Split sleeve Polishing type Applicable Fiber cable HRFCP-HSCJ-1(51) 701-0065-0-51 PC HRFCP-HSCJ-1AS(51) 701-0108-0-51 AdPC HRFCP-HSCJ-2(51) 701-0085-7-51 PC HRFCP-HSCJ-2AS(51) 701-0109-3-51 AdPC Copper alloy GI-50/125 SM-9.5/125 The positions of SC guide slot and FC guide key will not be always aligned. Cap 5 75 Terminators 17.8 17.8 11 Attenuators O3.6 Hole 34 Part Number CL No. Applicable products HSC-C2 704-0061-8 HSC-A2 , HSC-A3 , HSCJ-HRFCJ-B , CHSCJ-HSTJ-B , HSC-R1-B , HSC-R2-B The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. BMounting Dimensions Unit: mm Combination Housing a b c d e f 58 28 15.2 53.4 23.4 10.6 39.5 28 15.2 34.9 23.4 10.6 36 26 15.2 31.4 21.4 10.6 58 ---- 13.5 53.4 ---- 8.9 39.5 ---- 13.5 34.9 ---- 8.9 36 ---- 13.5 31.4 ---- 8.9 57.5 27.5 14.7 ---- ---- ---- MU Adapter Dimensions HSC-PH2-E1 Plug Plug Panel HSC-A2 Adapter HSC-A2-D1 HSC-A3 HSC-A3-D1 HSC-PH2-E2 HSC-PH3-B1 HSC-PH3-B2 HSC-PH2-E1-A HSC-PH3-A4 HSC-PH0.9-E1 HSC2-4A HSC2-4A-D1 HSC2-5A HSC2-5A-D1 HSC2-PH2-E2 HSC2-PH3-B1 SC HSC2-PH2-E1 HSC2-PH3-B2 HSC2-PH3-A HSC-PH2-E1-A HSC2-PH0.9-E1 HSC-PH2-E1 HSC-PH2-E1 HSC-R2-B HSC-PH3-B1 FC HSC-R1-B HSC-PH3-B2 Note: Panel thickness: 1.6mm Harsh Environment Attenuators Terminators 35 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Tools MU Crimp Tool Part Number CL No. Applicable connector HSC-T3 704-0287-0 SC plug for 2mm, 3mm cable. SC <Locations> (1)2mm Jacket crimping: section A 3mm Jacket crimping: section C (2)KevlarTM crimping: section B Harsh Environment FC HSC2 Insertion/Extraction Tool Part Number CL No. Applicable Products HSC-T1-L 704-0286-8 HSC2 series. <How to operate> Attenuators 1.Open the tip of tool by compressing levers as shown below. Hold/release lever 2.Insert the tool (with opening the tips) into adapter. 3.Release the levers (then the tool catch HSC2 plug) and you can release the connector. Terminators Plug assemble Tool 36 Part Number CL No. HSC2-PH2/CVMD 902-6029-1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. SC Duplex BNotes MU SC duplex adapters can be also connected with Simplex SC plugs. SC type attenuators (HSC-AT11K-A-) can be connected only with F type adapters. Plug Housing F Type 22.1 12.7 SC 7.8 25 Part Number HSCF-2PH2-E1(P)(31) HSCF-2PH2-E2(P)(31) HSCF-2PH3-B1(P)(31) HSCF-2PH3-B2(P)(31) CL No. 704-2109-3-31 704-2120-6-31 704-2032-0-31 704-2036-1-31 Applicable Cable Diameter O2mm O3mm Boot Color Blue Light purple Blue Light purple FC 55 Polishing type PC AdPC PC AdPC Harsh Environment H Type 15.89 8.5 9 Attenuators 25 55 CL No. 704-2046-5-31 704-2058-4-31 704-2054-3-31 704-2050-2-31 Applicable Cable Diameter O2mm O3mm Boot Color Blue Light purple Blue Light purple Polishing type PC AdPC PC AdPC Terminators Part Number HSCH-2PH2-B1(P)(31) HSCH-2PH2-B2(P)(31) HSCH-2PH3-B1(P)(31) HSCH-2PH3-B2(P)(31) 37 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Adapters BPanel cutout F type Snap-in and/or Screw Mounting MU .3 O2 9.5 25.9 9 12.7 34.7 30.7 M20.4 or 2.4 +0.2 0 26.2 +0.3 0 30.70.1 3 1.8 27.4 9.4 SC Part Number HSCF-2A(P)(51) HSCF-2A-D(P)(06) HSCF-2A-D2(P)(06) Panel thickness: 1.6mm CL No. 704-2008-6-51 704-2040-9-06 704-2112-8-06 Split sleeve Copper alloy Blue Zirconia Green BPanel cutout H type Snap-in 27.4 15.5 12.8 FC 18 +0.5 0 20.5 17.9 CL No. 704-2066-2-51 704-2117-1-02 704-2137-9 Split sleeve Copper alloy Color Blue Zirconia Green BPanel cutout H type Snap-in and/or Screw Mounting M20.4 or O2.4 3 1.8 18 12.8 O2.3 +0.2 0 18 +0.5 0 17.9 (8.5) 23 +0.3 0 Panel thickness: 1.6mm Part Number HSCH-2A1(P)(51) HSCH-2A1-D(P)(02) HSCH-2A1-D2(P) Harsh Environment 13 1.8 3 (8.5) Attenuators Color 13 27.4 +0.3 0 180.1 Panel thickness: 1.6mm Terminators Part Number HSCH-2A(P)(51) HSCH-2A-D(P)(02) HSCH-2A-D2(P)(03) 38 CL No. 704-2020-1-51 704-2062-1-02 704-2108-0-03 Split sleeve Copper alloy Zirconia Color Blue Green The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. BMounting Dimensions MU Plug Plug Adapter Panel <F Type> Unit: mm Combination HSCF-2A(P) HSCF-2A-D(P) Housing a b c d e f 58 28 15.2 53.4 23.4 10.6 39.5 36 28 26 15.2 15.2 34.9 31.4 23.4 21.4 10.6 10.6 a b c d e f 58 28 15.2 53.4 23.4 10.6 39.5 36 28 26 15.2 15.2 34.9 31.4 23.4 21.4 10.6 10.6 HSC-PH*-E# HSCF-PH*-B#(P) HSC-PH*-A4 HSC-PH0.9-E# SC Adapter Dimensions <H Type> Combination Adapter HSC-PH*-E# HSCH-2PH*-B#(P) HSC-PH*-A4 HSC-PH0.9-E# Note 1: * indicates cable diameter: Note 2: # indicates polishing type: FC HSCH-2A(P) HSCH-2A-D(P) HSCH-2A1(P) Dimensions Housing 2= O2mm diameter 3= O3mm diameter 1= PC polishing 2= AdPC polishing Harsh Environment Attenuators Terminators 39 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Complies with ANSI Standard MU ANSI X3T9.3 Fibre Channel Physical and Signaling Interface Plug Housings For Single Mode 8.99 SC 1 23 12.7 1.8 9.9 14.1 36.7 FC 61.5 Part Number CL No. Applicable cable HSCM-2SPH2-B1 704-2100-9 Simplex-2mm dia. cable or dual fiber zip cable HSCM-2SPH3-B1 704-2102-4 Simplex-3mm dia. cable or dual fiber zip cable HSCM-2SPH2-B2 704-2133-8 Simplex-2mm dia. cable or dual fiber zip cable HSCM-2SPH3-B2 --------- Simplex-3mm dia. cable or dual fiber zip cable For Multi-mode Boot color Polishing type Blue PC Light purple AdPC Harsh Environment 1.8 8.99 23 12.7 1.8 9.9 14.1 36.7 61.5 Part Number Attenuators Ferrules Convertional SC ferrules. Refer to page 33 for details. Adapters F type SC adapters. Terminators Refer to page 40 for details. 40 CL No. Applicable cable HSCM-2GPH2-B1 704-2104-0 Simplex-2mm dia. cable or dual fiber zip cable HSCM-2GPH3-B1 704-2106-5 Simplex-3mm dia. cable or dual fiber zip cable Boot color Polishing type Blue PC The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Simplified Receptacles & Plug Features MU 1.Space saving Types of SC plug Length(mm) Simplified plug 23.8 SC plug for 0.9mm fiber 33 Size comparison SC SC Simplified Plug FC Installation image (33) Harsh Environment SC plug (23) Simplified plug Attenuators Split sleeve Terminators 41 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Product Specifications Ratings Operating temperature range FC Environmental Characteristics SC Mechanical Characteristics Optical Characeristics MU Item Insertion Loss Return Loss -25C to +70C Test Method (IEC 61300) Wavelength 1310nm (LD) 0.5dB max. (PC, AdPC) (GI) Wavelength 1310nm (LED) 0.3dB max. (PC) (SM) (GI) Wavelength 1310nm (LD) Ferrule withdrawal Extract zirconia gauge 2.499 0.0005 mm dia from split sleeve. Durability (cycles, mating/un-mating) 1000 times Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 10 cycles in each of the 3 axis. Humidity resistance (Temperature/ humidity- cycles) Temperature: -10C to 65C, humidity: 90% to 96% 20 cycles Change of temperature Temperature: -40C / +75C 42cycles (Complies with Telcordia standard GR-326-CORE) Dry Heat 960 hours at 85C Cold 960 hours at -25C Harsh Environment Attenuators Simplified receptacle Part Material Housing Synthetic resin Sleeve Synthetic resin Split sleeve Zirconia or Copper alloy Plate Stainless steel Dust cap Synthetic resin Simplified plug Part Material Ferrule Zirconia and Synthetic resin Boot Synthetic resin Ferrule cap Synthetic resin Terminators Simplified plug extraction tool Part Material Extraction tool Synthetic resin -25C to +70C Specifications (SM) Materials 42 Storage temperature range 22dB min. (PC) 40dB min. (AdPC) 22dB min. (PC) Copper alloy split sleeve Zirconia split sleeve 2N to 5.9N 2N to 3.9N Insertion loss fluctuation after test: 0.2dB max. No visible damage, cracks or part dislocation. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Simplified receptacle to SC BPanel cutout O2 .3 Simplex / Shrouded 2- 13 +0.5 0 180.1 12.8 22 18 12.8 9 SC SR MU .4 0 M2 2 JAPAN 3 26 7.4 9.4 9.5 +0.5 0 CL No. 704-0320-4-51 704-0321-7-02 704-0320-4-03 Split sleeve Copper alloy Zirconia None Simplex / Unshrouded SC Part Number HSC-SR-1(51) HSC-SR-D1(02) HSC-SR-1(03) 3 16.2 8 +0.5 0 CL No. 704-0291-8-51 704-0292-0-06 704-0291-8-03 17.9 15.9 ( 8.5 ) Split sleeve Copper alloy Zirconia None BPanel cutout 0 .4 26 2- M2 3 12.8 23 18 12.8 9 18 +0.5 0 1.8 13 +0.5 0 180.1 O2 2- 7.4 17.9 15.9 ( 8.5 ) CL No. 704-0293-3-51 704-0294-6-01 704-0293-3-03 Attenuators .3 Panel thickness: 1.6mm Part Number HSCH-2SR-1(R)(51) HSCH-2SR-D1(R)(01) HSCH-2SR-1(R)(03) Split sleeve Copper alloy Zirconia None BPanel cutout 26 0 .4 3 2- 18 +0.5 0 12.8 13 +0.5 0 180.1 3 . O2 2- 7.4 Terminators 23 18 12.8 9 M2 Duplex H type / Shrouded (Without plate) Harsh Environment Duplex H type / Shrouded 9.35 7.8 Part Number HSC-SR-2(51) HSC-SR-D2(06) HSC-SR-2(03) FC JAPAN 12.7 +0.5 0 180.1 6.3 12.5 22 18 12.5 9 SC SR 2-M 2 0.4 BPanel cutout Part Number HSCH-2SR-3(R)(51) HSCH-2SR-D3(R)(01) HSCH-2SR-3(R)(03) CL No. 704-0300-7-51 704-0301-0-01 704-0300-7-03 Split sleeve Copper alloy Zirconia None 43 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. BPanel cutout 2- O2 .3 Duplex F Type / Unshrouded 8 +0.5 0 25.5 6.3 +0.2 0 9 19 34.7 25.5 21.7 12.7 MU 2SR SCR 2-M20.4 or 2-O2.4 25.7 +0.5 0 30.70.1 16.2 3 9.4 SC Part Number HSCF-2SR-2(P)(51) HSCF-2SR-D2(P)(02) HSCF-2SR-2(P)(03) 7.8 CL No. 704-0295-9-51 704-0296-1-02 704-0295-9-03 Split sleeve Copper alloy Zirconia None Simplified Receptacles to SC2 BPanel cutout 24.3 10.73 4SR JAPAN JAPAN FC 8+0.5 0 37.4 33.4 28.2 4SR 12.4 +0.2 0 12.7+0.5 0 Part Number HSC2-4SR-1(51) HSC2-4SR-D1(01) HSC2-4SR-1(03) Harsh Environment .4 r 2-O2 0.4 o 2-M2 0 28.6 +0.5 2O2 .3 4-position / Shrouded CL No. 704-0311-3-51 704-0312-6-01 704-0311-3-03 Split sleeve Copper alloy Zirconia None 8-Position / Shrouded BPanel cutout 24.3 O 2.4 or 2-O 0.4 2-M2 8SR +0.2 0 6 56 +0.5 0 55.4 60.6 64.6 Attenuators 8SR 10.7 3 60.60.1 3 2. 12.4 +0.5 12.7 0 Terminators Part Number HSC2-8SR-1(51) HSC2-8SR-D1(01) HSC2-8SR-1(03) 44 CL No. 704-0266-0-51 704-0270-8-01 704-0266-0-03 Split sleeve Copper alloy Zirconia None The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. 8-Position / Unshrouded BPanel cutout .3 +0.2 0 O2.4 r 20.4 o 2-M2 MU O2 14.5 11.5 3 64.6 60.6 55.4 56+0.5 0 60.60.1 12.7+0.5 0 12.4 FC 5 5 O2.449 0.0005 Simplified plug for 0.9mm fiber Split sleeve Copper alloy Zirconia None (Hole diameter) OA+0.001 0 CL No. 704-0318-2-51 704-0403-0-01 704-0318-2-03 SC Part Number HSC2-8SR-2(51) HSC2-8SR-D2(01) HSC2-8SR-2(03) 4.5 10.3 Part Number HSC2-FK-A125(31) 23.8 CL No. A dimension 704-0267-3-31 0.125 704-0268-6-31 0.126 HSC2-FK-A1255(31) 704-0269-9-31 0.1255 Black Harsh Environment HSC2-FK-A126(31) Boot color Split sleeve Zirconia 11.4 Copper alloy CL No. Split sleeve 704-0275-1-51 Copper alloy 704-0264-5 Zirconia HSC-D Attenuators Part Number HSC-SLIT-SLEEVE(51) Extraction tool for Simplified plug Terminators 7 5 6 6 20 30 20 Part Number CL No. Part Number CL No. HSC-T10 704-0350-5 HSC-T12 704-0448-8 45 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. 46