LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-
LL-LL-
LL-1003
10031003
1003GD3A-002
GD3A-002GD3A-002
GD3A-002 Spec No.
Spec No.Spec No.
Spec No. S/N-01051407
S/N-01051407S/N-01051407
S/N-01051407D
DD
DPage
PagePage
Page 2
of
ofof
of
4
Features
♦ High intensity
♦ 10mm diameter package
♦ Wide viewing angle
♦ General purpose leads
♦ Reliable and rugg ed
Package Dimension:
Part NO. Lens C olor Source C olor
LL-1003GD3A-002 Green Diffused Green
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2 5(. 01 0”)m m unless otherwi se no te d.
3. Protru ded resi n under flan ge is 1.0mm( .04”) max
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice
LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-
LL-LL-
LL-1003
10031003
1003GD3A-002
GD3A-002GD3A-002
GD3A-002 Spec No.
Spec No.Spec No.
Spec No. S/N-01051407
S/N-01051407S/N-01051407
S/N-01051407D
DD
DPage
PagePage
Page 3
of
ofof
of
4
Absolute Maximum Ratings at Ta=25℃
℃℃
℃
Parameter MAX. Unit
Power Dissipation 100 mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA
Continuous Forward Current 50 mA
Derating Linear From 50℃0.4 mA/℃
Reverse Voltage 5 V
Operating Temperature Range -40℃ to +80℃
Storage Temperature Range -40℃ to +80℃
Lead Soldering Temperature
[4mm(.157”) From Body] 260℃ for 5 Seconds
Electrical Optical Charact erist ics at Ta=25℃
℃℃
℃
Parameter Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity Iv --- 29 --- mcd IF=20mA (Note 1)
Viewing Angle 2θ1/2 --- 50 --- Deg (Note 2)
Peak Emission Wavelength λp--- 564 --- nm IF=20mA
Dominant Wavelength λd565 570 575 nm IF=20mA (Note 3)
Spectral Line Half-Width △λ --- 28 --- nm IF=20mA
Forward Voltage VF1.8 2.2 2.6 V IF=20mA
Reverse Current IR--- --- 100 µAV
R=5V
Note:
Note:Note:
Note:
1. Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial
luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-
LL-LL-
LL-1003
10031003
1003GD3A-002
GD3A-002GD3A-002
GD3A-002 Spec No.
Spec No.Spec No.
Spec No. S/N-01051407
S/N-01051407S/N-01051407
S/N-01051407D
DD
DPage
PagePage
Page 4
of
ofof
of
4
Spectral Radiance (Peak @ 564n m )
0.0
0.2
0.4
0.6
0.8
1.0
420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720
Wave Length(nm)
Normalized
Response
ypical Electrical / Optical Characteristics Curves
ypical Electrical / Optical Characteristics Curvesypical Electrical / Optical Characteristics Curves
ypical Electrical / Optical Characteristics Curves
(25
(25(25
(25℃
℃℃
℃ Ambient Temperature Unless Otherwise Noted)
Ambient Temperature Unless Otherwise Noted) Ambient Temperature Unless Otherwise Noted)
Ambient Temperature Unless Otherwise Noted)
Forward Current
vs Forw ard Voltage
0
10
20
30
40
50
1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9
Forward Voltage VF(V)
Forward Current
IF(mA)
Relative Luminous Intensity
vs Forward Current
0
0.5
1
1.5
2
2.5
3
0 1020304050
Forward C u rre nt IF(m A)
Relative Intensity
(LOP@20mA=1)
Relative Intensity (LOP @ MAX=1)
0.81.0 0.6 0.4 0.20.2 0.60.4 1.00.8
