GL34A thru GL34J Vishay General Semiconductor Surface Mount Glass Passivated Junction Rectifier FEATURES * Superectifier structure for high reliability condition * Ideal for automated placement SUPERECTIFIER(R) * Low forward voltage drop * Low leakage current * Meets environmental standard MIL-S-19500 * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * AEC-Q101 qualified DO-213AA (GL34) * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 0.5 A VRRM 50 V to 600 V IFSM 10 A VF 1.2 V, 1.3 V IR 5.0 A TJ max. 175 C MECHANICAL DATA Case: DO-213AA, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER STANDARD RECOVERY DEVICE: 1ST BAND IS WHITE SYMBOL Polarity color bands (2nd band) GL34A GL34B GL34D GL34G GL34J Gray Red Orange Yellow Green UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 V Maximum average forward rectified current at TL = 75 C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A Max. full load reverse current, full cycle average at TA = 55 C IR(AV) 30 A TJ, TSTG - 65 to + 175 C Operating junction and storage temperature range Document Number: 88634 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GL34A thru GL34J Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 0.5 A SYMBOL GL34B VF TA = 25 C Maximum DC reverse current at rated DC blocking voltage GL34A GL34D GL34G 1.2 GL34J UNIT 1.3 V 5.0 IR TA = 125 C A 50 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 1.5 s Typical junction capacitance 4.0 V, 1 MHz CJ 4.0 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance GL34A GL34B GL34D RJA (1) 150 RJT (2) 70 GL34G GL34J UNIT C/W Notes (1) Thermal resistance from junction to ambient, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.036 98 2500 7" diameter plastic tape and reel GL34G-E3/98 GL34G-E3/83 0.036 83 9000 13" diameter plastic tape and reel GL34GHE3/98 (1) 0.036 98 2500 7" diameter plastic tape and reel GL34GHE3/83 (1) 0.036 83 9000 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 60 Hz Resistive or Inductive Load 0.4 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 0.5 0.3 0.2 0.1 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 8 6 4 2 0.375" (9.5 mm) Lead Length 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 88634 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GL34A thru GL34J Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle 0.1 0.01 0.4 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.6 0.8 1.0 1.2 1.4 1 1.6 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Instantaneous Reverse Current (A) 10 TJ = 100 C 1 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AA (GL34) Solderable Ends Mounting Pad Layout 1st BAND 2nd BAND 0.066 (1.676) 0.060 (1.524) 0.079 (2.0) MIN. D1 = D2 0.079 (2.0) MAX. 0.049 (1.25) MIN. 0.022 (0.559) 0.016 (0.406) D2 = D1 +0 - 0.008 (0.20) 0.177 (4.5) REF. 0.145 (3.683) 0.131 (3.327) 1st band denotes type and polarity 2nd band denotes voltage type Document Number: 88634 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000