Document Number: 88634 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Surface Mount Glass Passivated Junction Rectifier
GL34A thru GL34J
Vishay General Semiconductor
FEATURES
Superectifier structure for high reliability condition
Ideal for automated placement
Low forward voltage drop
Low leakage current
Meets environmental standard MIL-S-19500
Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
AEC-Q101 qualified
Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for consumer,
automotive and telecommunication.
MECHANICAL DATA
Case: DO-213AA, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
PRIMARY CHARACTERISTICS
IF(AV) 0.5 A
VRRM 50 V to 600 V
IFSM 10 A
VF1.2 V, 1.3 V
IR5.0 μA
TJ max. 175 °C
DO-213AA (GL34)
SUPERECTIFIER
®
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL GL34A GL34B GL34D GL34G GL34J UNIT
STANDARD RECOVERY DEVICE: 1ST BAND IS WHITE
Polarity color bands (2nd band) Gray Red Orange Yellow Green
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V
Maximum RMS voltage VRMS 35 70 140 280 420 V
Maximum DC blocking voltage VDC 50 100 200 400 600 V
Maximum average forward rectified current at TL = 75 °C IF(AV) 0.5 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 10 A
Max. full load reverse current, full cycle average at TA = 55 °C IR(AV) 30 μA
Operating junction and storage temperature range TJ, TSTG - 65 to + 175 °C
www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88634
2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
GL34A thru GL34J
Vishay General Semiconductor
Notes
(1) Thermal resistance from junction to ambient, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL GL34A GL34B GL34D GL34G GL34J UNIT
Maximum instantaneous
forward voltage 0.5 A VF1.2 1.3 V
Maximum DC reverse current at
rated DC blocking voltage
TA = 25 °C
IR
5.0
μA
TA = 125 °C 50
Typical reverse recovery time IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A trr 1.5 μs
Typical junction capacitance 4.0 V, 1 MHz CJ4.0 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GL34A GL34B GL34D GL34G GL34J UNIT
Maximum thermal resistance RJA (1) 150
°C/W
RJT (2) 70
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
GL34G-E3/98 0.036 98 2500 7" diameter plastic tape and reel
GL34G-E3/83 0.036 83 9000 13" diameter plastic tape and reel
GL34GHE3/98 (1) 0.036 98 2500 7" diameter plastic tape and reel
GL34GHE3/83 (1) 0.036 83 9000 13" diameter plastic tape and reel
0
25 50 75 100 125 150 175
0.1
0.2
0.3
0.4
0.5
Average Forward Rectified Current (A)
Terminal Temperature (°C)
60 Hz
Resistive or
Inductive Load
0.375" (9.5 mm) Lead Length
101 100
0
10
2
4
6
8
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
T
J
= T
J
Max.
8.3 ms Single Half Sine-Wave
Document Number: 88634 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
GL34A thru GL34J
Vishay General Semiconductor
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Characteristics
Fig. 5 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
0.4 0.6 0.8 1.0 1.2 1.4 1.6
Instantaneous Forward Voltage (V)
0.01
0.1
1
10
Instantaneous Forward Current (A)
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0
0.01
0.1
1
10
60 80 10020 40
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
TJ = 100 °C
TJ = 25 °C
101 100
10
1
100
Reverse Voltage (V)
Junction Capacitance (pF)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Solderable Ends
1
st
BAND
2
nd
BAND
1
st
band denotes type and polarity
2
nd
band denotes voltage type
D2
0.079 (2.0)
MAX.
0.049 (1.25)
MIN.
0.177 (4.5) REF.
Mounting Pad Layout
+ 0
- 0.008 (0.20)
D2 = D1
0.022 (0.559)
0.016 (0.406)
0.145 (3.683)
0.131 (3.327)
0.066 (1.676)
0.060 (1.524)
D1 =
0.079 (2.0)
MIN.
DO-213AA (GL34)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.