Technical Data Sheet POWER LED 30-01/A2C-AQSC Features . High Flux Output. . Designed for High Current Operation. . Low Thermal Resistance. . Low Profile. . Packaged in Tubes for Use with Automatic Insertion Equipment. . The product itself will remain within RoHS compliant version. Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 30-01/A2C-AQSC Material AlGaInP Chip Emitted Color Super Sunset Orange Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Rev 1 Lens Color Water Clear Page: 1 of 7 Established by: Max Chen Technical Data Sheet POWER LED 30-01/A2C-AQSC Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions 0.25mm Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Units Continuous Forward Current Peak Forward Current(Duty 1/10 @ 1KHZ) IF 70 mA IFP 160 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +100 Storage Temperature Tstg -40 ~ +100 Soldering Temperature(T=5 sec) Tsol 260 5 LED Junction Temperature Tj 125 Power Dissipation Pd 220 mW ESD 4000 V Electrostatic Discharge Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Rev 1 Page: 2 of 7 Established by: Max Chen Technical Data Sheet POWER LED 30-01/A2C-AQSC Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Condition Unit Total Flux v 3600 5100 ---- IF=70mA mlm Viewing Angle 21/2 ---- 70 ---- IF=70mA deg Peak Wavelength p ---- 621 ---- IF=20mA nm Dominant Wavelength d ---- 615 ---- IF=20mA nm Spectrum Radiation Bandwidth ---- 18 ---- IF=20mA nm Forward Voltage VF ---- 2.6 3.1 IF=70mA V Zener Reverse Voltage Vz 5.8 ---- ---- Iz=5mA V Reverse Current IR ---- ---- 10 VR=5V uA Rank 30-01/A2C-AQSC (1) (2) (3) (1) VF(V) Bin 3 4 5 6 7 Min 2.10 2.30 2.50 2.70 2.90 (2) d(nm) Max 2.30 2.50 2.70 2.90 3.10 Bin 6 7 8 Min 610.0 613.5 617.0 (3)v(mlm) Max 613.5 617.0 620.0 Bin Q R S Min 3600 4500 5650 *Measurement Uncertainty of Forward Voltage0.1V *Measurement Uncertainty of Luminous Intensity: 15% Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Rev 1 Page: 3 of 7 Established by: Max Chen Max 4500 5650 7150 Technical Data Sheet POWER LED 30-01/A2C-AQSC Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 80 FORWARD CURRENT (mA) RELATIVE INTENSITY 1.00 0.50 0.00 560 580 600 620 640 WAVELENGTH (nm) 60 40 20 0 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20 FORWARD VOLTAGE (V) 660 Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp. 80 1.00 MAXMUM DC CURRENT(mA) 70 RELATIVE INTENSITY 0.80 0.60 0.40 0.20 0.00 0 10 20 30 40 50 60 FORWARD CURRENT (mA) 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE (C) 70 Relative Intensity vs. Off Axis Angle Relative Intensity vs. Angle Dispacement 1.0 RELATIVE INTENSITY 0 20 -40 RELATIVE INTENSITY -20 40 60 -60 -80 0.5 80 1.0 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 0.0 -90 -60 -30 0 30 60 VIEWING ANGLE (DEGREE) Rev 1 Page: 4 of 7 Established by: Max Chen 90 Technical Data Sheet POWER LED 30-01/A2C-AQSC Label Form Specification EVERLIGHT CPN: P/N: RoHS 30-01/A2C-AQSC QTY LOT NO CAT: HUE: REF: CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Flux and Forward Voltage HUE: Ranks of Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Rev 1 Page: 5 of 7 Established by: Max Chen Technical Data Sheet POWER LED 30-01/A2C-AQSC Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode "breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can't flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light. Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Rev 1 Page: 6 of 7 Established by: Max Chen Technical Data Sheet POWER LED 30-01/A2C-AQSC 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance DIP Soldering 400 Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. 100 Max. (60 sec Max.) 265 Max. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, 2267-6306 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-059 Established date: 11-16-2005 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, Rev 1 Page: 7 of 7 Established by: Max Chen