30-01/A2C-AQSC - Everlight International Corp.

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 1 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Features

. High Flux Output.

. Designed for High Current Operation.

. Low Thermal Resistance.

. Low Profile.

. Packaged in Tubes for Use with Automatic

Insertion Equipment.

. The product itself will remain within RoHS compliant version.

Descriptions

This revolutionary package design allows the light designer to reduce the number of LEDs

required and provide a more uniform and unique illuminated appearance than with other LED

solutions. This is possible through the efficient optical package design and high-current capabilities.

The low profile package can be easily coupled with reflectors or lenses to efficiently distribute

light and provide the desired light appearance.

Applications

. Automotive Lighting

. Electronic Signs and Signals

. Special Lighting application

Device Selection Guide

Chip

PART NO. Material Emitted Color Lens Color

30-01/A2C-AQSC AlGaInP

Super Sunset

Orange Water Clear

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 2 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Package Dimensions

Notes: 1.All dimensions are in millimeters

2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads

3.Tolerances unless dimensions ±0.25mm

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Units

Continuous Forward Current IF 70 mA

Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 160 mA

Reverse Voltage VR 5 V

Operating Temperature Topr -40 ~ +100 ℃

Storage Temperature Tstg -40 ~ +100 ℃

Soldering Temperature(T=5 sec) Tsol 260 ± 5 ℃

LED Junction Temperature Tj 125 ℃

Power Dissipation Pd 220 mW

Electrostatic Discharge ESD 4000 V

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 3 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Condition Unit

Total Flux Φv 3600 5100 ---- IF=70mA mlm

Viewing Angle 2θ1/2 ---- 70 ---- IF=70mA deg

Peak Wavelength λp ---- 621 ---- IF=20mA nm

Dominant Wavelength λd ---- 615 ---- IF=20mA nm

Spectrum Radiation

Bandwidth △λ ---- 18 ---- IF=20mA nm

Forward Voltage VF ---- 2.6 3.1 IF=70mA V

Zener Reverse Voltage Vz 5.8 ---- ---- Iz=5mA V

Reverse Current IR ---- ---- 10 VR=5V uA

Rank

30-01/A2C-AQSC □ □ □

(1) (2) (3)

(1) VF(V) (2) λd(nm) (3)Φv(mlm)

Bin Min Max Bin Min Max Bin Min Max

3 2.10 2.30 6 610.0 613.5 Q 3600 4500

4 2.30 2.50 7 613.5 617.0 R 4500 5650

5 2.50 2.70 8 617.0 620.0 S 5650 7150

6 2.70 2.90

7 2.90 3.10

*Measurement Uncertainty of Forward Voltage：±0.1V

*Measurement Uncertainty of Luminous Intensity: ±15%

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 4 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Typical Electro-Optical Characteristics Curves

Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage

Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp.

Relative Intensity vs. Angle Dispacement Relative Intensity vs. Off Axis Angle

10 30 50 700 204060

FORWARD CURRENT (mA)

0.00

0.20

0.40

0.60

0.80

1.00

RELATIVE INTENSITY

1.40 1.80 2.20 2.60 3.001.60 2.00 2.40 2.80 3.20

FORWARD VOLTAGE (V)

0

20

40

60

80

FORWARD CURRENT (mA)

560 580 600 620 640 660

WAVELENGTH (nm)

0.00

0.50

1.00

RELATIVE INTE N SITY

0 2040608010012014

0

10

20

30

40

50

60

70

80

MAXMUM DC CURRENT(mA)

AMBIENT TEMPERATURE (C)

1.0 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0

80

60

40

20

0

-20

-40

-60

-80

RELATIVE INTENSITY

-90 -30 30 90-60 0 60

VIEWING ANGLE (DEGREE)

0.0

0.5

1.0

R E LA TIV E INT EN SIT Y

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 5 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Label Form Specification CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: Ranks of Flux and Forward Voltage

HUE: Ranks of Wavelength

REF: Reference

LOT No: Lot Number

MADE IN TAIWAN: Production Place

CPN:

P/N:

EVERLIGHT

30-01/A2C-AQSC

QTY：

MADE IN TAIWAN

CAT:

HUE:

REF:

LOT NO：

RoHS

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 6 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

Notes

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on

material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for

using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any

damage resulting from use of the product which does not comply with the absolute maximum

ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT

corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s

consent.

4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises

to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through

the zener branch to keep the voltage at exactly Vz.

5. When the LED is connected using serial circuit, if either piece of LED is no light up but current

can’t flow through causing others to light down. In new design, the LED is parallel with zener

diode. if either piece of LED is no light up but current can flow through causing others to light.

Technical Data Sheet

POWER LED

30-01/A2C-AQSC

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1 Page: 7 of 7

Device number: DLE-300-059 Established date: 11-16-2005 Established by: Max Chen

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm

from solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature

particularly when soldering.

Recommended soldering conditions:

Hand Soldering DIP Soldering

Temp. at tip of iron 400 Max.℃ (30W Max.) Preheat temp. 100 Max.℃ (60 sec Max.)

Soldering time 3 sec Max. Bath temp . 265 Max.

Distance 3mm Min.(From solder joint

to case) Bath time. 5 sec Max.

Distance 3mm Min.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189,

2267-6306