MKP 1840 Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Dimensions in millimeters w max. l max. * Compliant to RoHS Directive 2002/95/EC Marking CAPACITANCE TOLERANCES h max. 20 % (M), 10 % (K), 5 % (J) RATED VOLTAGES (UR) 100 VDC,160 VDC, 250 VDC, 400 VDC, 630 VDC 0.6 6-1 0.4 Pitch 0.4 LEAD DIAMETER dt (mm) 0.5 0.6 0.8 1.0 Measured at 100 VDC after one minute For C 0.33 F: 25 000 M (UR 100 VDC) O 0.8 W (mm) < 16 16.5 INSULATION RESISTANCE PITCH (mm) 5 7.5/10 15 to 37.5 15 to 37.5 PERMISSIBLE AC VOLTAGES (RMS) UP TO 60 Hz 63 VAC, 100 VAC, 160 VAC, 220 VAC, 250 VAC TEST VOLTAGE (ELECTRODE/ELECTRODE) 1.6 x UR for 2 s TIME CONSTANT MAIN APPLICATIONS Pulse operations, deflection circuits in TV-sets (S-correction), SMPS and thyristor circuits, storage, filter, timing, sample and hold circuits. Measured at 100 VDC after one minute For C > 0.33 F: 30 000 s minimum value TEMPERATURE COEFFICIENT DIELECTRIC Polypropylene film - 250 x 10-6/C (typical value) ELECTRODES CAPACITANCE DRIFT Metallized Up to + 40 C, < 0.5 % for a period of two years COATING DIELECTRIC ABSORPTION Flame retardant plastic case (class UL 94 V0), epoxy resin sealed. 0.05 % (typical value) according to IEC 60068-2-21 CONSTRUCTION DERATING FOR DC AND AC CATEGORY VOLTAGE UC LEADS At + 85 C: UC = 1.0 UR At + 100 C: UC = 0.7 UR Extended metallized film (refer to General Information) Tinned wire SELF INDUCTANCE IEC TEST CLASSIFICATION ~ 6 nH measured with 2 mm long leads 55/100/56, according to IEC 60068 PULL TEST ON LEADS OPERATING TEMPERATURE RANGE 30 N in direction of leads according to IEC 60068-2-21 - 55 C to + 100 C CAPACITANCE RANGE For further details, please refer to the general information available at www.vishay.com/doc?26033. 4700 pF to 10 F MAXIMUM PULSE RISE TIME PCM (mm) 5 7.5 10 15 22.5 27.5 37.5 100 VDC 390 - Maximum Pulse Rise Time dV/dt [V/s] 160 VDC 250 VDC 400 VDC 240 300 175 20 100 125 200 60 75 120 45 60 95 30 40 65 630 VDC 510 280 160 120 85 Note * If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted. Document Number: 26061 Revision: 30-Nov-10 For technical questions, contact: dc-film@vishay.com www.vishay.com 147 MKP 1840 Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type DISSIPATION FACTOR TAN MEASURED AT 1 kHz C 0.1 F 0.3 x 10-3 0.1 F < C 1.0 F 0.4 x 10-3 C > 1.0 F 1 x 10-3 10 kHz 0.6 x 10-3 0.6 x 10-3 - 100 kHz 4 x 10-3 - - Maximum values CAP. VOLTAGE CODE 01 100 VDC/63 VAC CAP. CODE VOLTAGE CODE 16 160 VDC/100 VAC VOLTAGE CODE 25 250 VDC/160 VAC VOLTAGE CODE 63 630 VDC/250 VAC (1) VOLTAGE CODE 40 400 VDC/220 VAC W H L PCM W H L PCM W H L PCM W H L PCM W H L PCM 4700 pF - 247 3.5 8.5 7.5 5 - - - - - - - - - - - - - - - - 6800 pF - 268 3.5 8.5 7.5 5 - - - - - - - - - - - - - - - - 0.01 F - 310 3.5 8.5 7.5 5 - - - - 4.0 9.0 10.0 7.5 4.0 9.0 13.0 10 4.5 9.5 13.0 10 0.015 F - 315 3.5 8.5 7.5 5 - - - - 4.0 9.0 10.0 7.5 4.5 9.0 13.0 10 5.5 10.5 13.0 10 0.022 F - 322 3.5 8.5 7.5 5 - - - - 4.0 9.0 10.0 7.5 5.5 10.5 13.0 10 6.5 11.5 13.0 10 0.033 F - 333 4.5 9.5 7.5 5 4.0 9.0 10.0 7.5 4.0 9.0 13.0 10 6.5 11.5 13.0 10 5.5 10.5 18.0 15 0.047 F - 375 4.5 9.5 7.5 5 4.0 9.5 10.0 7.5 4.5 9.5 13.0 10 5.5 10.5 18.0 15 6.5 12.5 18.0 15 0.068 F - 368 5.0 10.0 7.5 5 4.5 9.5 13.0 10 5.5 10.5 13.0 10 6.5 12.5 18.0 15 7.5 13.5 18.0 15 0.1 F - 410 5.5 11.5 7.5 5 5.5 10.5 13.0 10 6.5 11.5 13.0 10 7.5 13.5 18.0 15 8.5 17.5 18.0 15 0.15 F - 415 - - - - 6.5 11.5 13.0 10 6.5 12.5 18.0 15 8.5 17.5 18.0 15 8.5 16.5 26.5 22.5 0.22 F - 422 - - - - 6.5 12.5 18.0 15 7.5 13.5 18.0 15 10.5 17.5 18.0 15 10.5 18.5 26.5 22.5 0.33 F - 433 - - - - 6.5 12.5 18.0 15 8.5 14.5 18.0 15 10.5 18.5 26.5 22.5 11.0 21.0 26.5 22.5 0.47 F - 447 - - - - 7.5 13.5 18.0 15 8.5 17.5 18.0 15 11.0 21.0 26.5 22.5 13.5 23.5 31.5 27.5 0.68 F - 468 - - - - 8.5 17.5 18.0 15 8.5 16.5 26.5 22.5 11.0 21.0 31.0 27.5 16.5 29.5 31.5 27.5 1.0 F - 510 - - - - 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 13.5 23.5 31.5 27.5 16.5 29.5 31.5 27.5 1.5 F - 515 - - - - 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 16.5 29.5 31.5 27.5 18.0 32.5 41.5 37.5 2.2 F - 522 - - - - 11.0 21.0 31.0 27.5 13.5 23.5 31.5 27.5 16.0 28.5 41.5 37.5 20.0 40.0 42.5 37.5 3.3 F - 533 - - - - 13.5 23.5 31.5 27.5 16.5 29.5 31.5 27.5 20.0 40.0 42.5 37.5 - - - - 4.7 F - 547 - - - - 12.5 22.5 41.5 37.5 16.0 28.5 41.5 37.5 20.0 40.0 42.5 37.5 - - - - 6.8 F - 568 - - - - 16.0 28.5 41.5 37.5 18.0 32.5 41.5 37.5 37.5 - - - - - - - 10.0 F - 610 - - - - 18.0 32.5 41.5 37.5 20.0 40.0 42.5 37.5 - - - - - - - - Notes * Further C-values upon request (1) Not suitable for mains applications Please refer to X-capacitors in our catalog "RFI Suppression Components" RECOMMENDED PACKAGING TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) D Ammo 16.5 S (1) MKP 1840-310-405-D X X - - G Ammo 18.5 S (1) MKP 1840-310-405-G X X - - F Reel 16.5 350 MKP 1840-310-405-F X X - - W Reel 18.5 350 MKP 1840-310-405-W X X - - V Reel 18.5 500 MKP 1840-522-255-V - X X - G Ammo 18.5 L (2) MKP 1840-522-255-G - - X - - Bulk - - MKP 1840-547-255 X X X X LETTER CODE ORDERING CODE EXAMPLES PCM 7.5 to 10 PCM 15 PCM 22.5 to 27.5 PCM 37.5 Notes (1) (2) S = Box size 55 mm x 210 mm x 340 mm (W x H x L) L = Box size 60 mm x 510 mm x 360 mm (W x H x L) www.vishay.com 148 For technical questions, contact: dc-film@vishay.com Document Number: 26061 Revision: 30-Nov-10 MKP 1840 100 7 5 5 3 2 VRMS 47 00 0.0 3 2 0.0 33 0.0 47 0.1 2 5 7 105 3 2 6 5 7 10 f [Hz] 3 5 3 2 Capacitance in F 0.0 100 7 5 3 2 1 1 47 0.1 2 3 5 7 10 4 2 4.7 3 2.2 1.0 0.4 7 0.2 2 5 7 10 5 2 3 VRMS 0.0 1 0.0 0.0 47 2.2 1.0 0.1 0.4 0 7 .22 630 VDC 10 3 2 3 5 7 10 4 2 3 Permissible AC Voltage versus Frequency Document Number: 26061 Revision: 30-Nov-10 2 3 5 7 10 6 f [Hz] Capacitance in F 1 0.0 2 2 0.0 47 3.3 2.2 1.0 0.1 0.2 2 0.4 7 400 VDC 10 3 2 5 7 10 4 3 3 2 5 7 10 5 2 3 5 7 10 f [Hz] 6 5 5 7 10 2 3 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 22 10 7 5 3 2 1 2 Permissible AC Voltage versus Frequency Capacitance in F 100 7 5 3 2 1 5 7 10 6 f [Hz] Permissible AC Voltage versus Frequency 5 3 2 5 7 10 4 3 0.0 10 7 5 3 2 250 VDC 10 3 2 100 7 5 3 2 0.0 10 10 3 5 3 2 0.0 22 10 7 5 3 2 5 7 10 5 160 VDC Permissible AC Voltage versus Frequency Z () VRMS Permissible AC Voltage versus Frequency 3 0.4 7 1.0 5 7 10 6 f [Hz] 0.01 5 0.1 5 1.0 Impedance versus Frequency Z = f (f) (Lead length 2.0mm) For technical questions, contact: dc-film@vishay.com 5 10 0.015F 2 4.7 0.068F 0.033F 5 7 104 1 2.2 10 0.15F 3 0.1 0.2 2 0.33F 2 Capacitance in pF and F VRMS 103 47 1.5F 0.68F 100 VDC 0.0 10 7 5 3 2 3 1 0.0 33 100 7 5 3 2 1 10 7 5 Capacitance in F 6.8F 3.3F VRMS AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type 5 100 [MHz] www.vishay.com 149 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000