Document Number: 26061 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 30-Nov-10 147
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
MKP 1840
Vishay Roederstein
MAIN APPLICATIONS
Pulse operations, deflection circuits in TV-sets
(S-correction), SMPS and thyristor circuits, storage, filter,
timing, sample and hold circuits.
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized
COATING
Flame retardant plastic case (class UL 94 V0), epoxy resin
sealed.
CONSTRUCTION
Extended metallized film (refer to General Information)
LEADS
Tinned wire
IEC TEST CLASSIFICATION
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE
- 55 °C to + 100 °C
CAPACITANCE RANGE
4700 pF to 10 µF
FEATURES
• Compliant to RoHS Directive 2002/95/EC
CAPACITANCE TOLERANCES
± 20 % (M), ± 10 % (K), ± 5 % (J)
RATED VOLTAGES (UR)
100 VDC,160 VDC, 250 VDC, 400 VDC, 630 VDC
INSULATION RESISTANCE
Measured at 100 VDC after one minute
For C ≤ 0.33 µF:
25 000 MΩ (UR 100 VDC)
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60 Hz
63 VAC, 100 VAC, 160 VAC, 220 VAC, 250 VAC
TEST VOLTAGE (ELECTRODE/ELECTRODE)
1.6 x UR for 2 s
TIME CONSTANT
Measured at 100 VDC after one minute
For C > 0.33 µF:
30 000 s minimum value
TEMPERATURE COEFFICIENT
- 250 x 10-6/°C (typical value)
CAPACITANCE DRIFT
Up to + 40 °C, < 0.5 % for a period of two years
DIELECTRIC ABSORPTION
0.05 % (typical value) according to IEC 60068-2-21
DERATING FOR DC AND AC CATEGORY
VOLTAGE UC
At + 85 °C: UC = 1.0 UR
At + 100 °C: UC = 0.7 UR
SELF INDUCTANCE
~ 6 nH measured with 2 mm long leads
PULL TEST ON LEADS
≥ 30 N in direction of leads according to IEC 60068-2-21
For further details, please refer to the general information
available at www.vishay.com/doc?26033.
MAXIMUM PULSE RISE TIME
Note
• If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted.
LEAD DIAMETER
dt (mm)
W
(mm)
PITCH
(mm)
0.5 - 5
0.6 - 7.5/10
0.8 < 16 15 to 37.5
1.0 ≥ 16.5 15 to 37.5
l
max.
Ø 0.8
Pitch
± 0.4
0.6
w
max. Marking
h
max.
6-1
± 0 . 4
Dimensions in millimeters
PCM
(mm)
Maximum Pulse Rise Time dV/dt [V/µs]
100 VDC 160 VDC 250 VDC 400 VDC 630 VDC
5 390 - - - -
7.5 - 240 300 - -
10 - 175 20 - 510
15 - 100 125 200 280
22.5 - 60 75 120 160
27.5 - 45 60 95 120
37.5 - 30 40 65 85
MKP 1840
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26061
148 Revision: 30-Nov-10
DISSIPATION FACTOR TAN δ
Notes
• Further C-values upon request
(1) Not suitable for mains applications
Please refer to X-capacitors in our catalog “RFI Suppression Components”
RECOMMENDED PACKAGING
Notes
(1) S = Box size 55 mm x 210 mm x 340 mm (W x H x L)
(2) L = Box size 60 mm x 510 mm x 360 mm (W x H x L)
MEASURED AT C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF C > 1.0 µF
1 kHz 0.3 x 10-3 0.4 x 10-3 1 x 10-3
10 kHz 0.6 x 10-3 0.6 x 10-3 -
100 kHz 4 x 10-3 --
Maximum values
CAP. CAP.
CODE
VOLTAGE
CODE 01
100 VDC/63 VAC
VOLTAGE
CODE 16
160 VDC/100 VAC
VOLTAGE
CODE 25
250 VDC/160 VAC
VOLTAGE
CODE 40
400 VDC/220 VAC
VOLTAGE
CODE 63
630 VDC/250 VAC (1)
WH LPCMWH LPCMWH LPCMWH LPCMWH LPCM
4700 pF - 247 3.5 8.5 7.5 5 ----------------
6800 pF - 268 3.5 8.5 7.5 5 ----------------
0.01 µF- 3103.58.57.55----4.09.010.07.54.09.013.0104.59.513.010
0.015 µF - 315 3.5 8.5 7.5 5 ----4.09.010.07.54.59.013.0105.510.513.010
0.022 µF - 322 3.5 8.5 7.5 5 ----4.09.010.07.55.510.513.0106.511.513.010
0.033 µF - 333 4.5 9.5 7.5 5 4.0 9.0 10.0 7.5 4.0 9.0 13.0 10 6.5 11.5 13.0 10 5.5 10.5 18.0 15
0.047 µF - 375 4.5 9.5 7.5 5 4.0 9.5 10.0 7.5 4.5 9.5 13.0 10 5.5 10.5 18.0 15 6.5 12.5 18.0 15
0.068 µF - 368 5.0 10.0 7.5 5 4.5 9.5 13.0 10 5.5 10.5 13.0 10 6.5 12.5 18.0 15 7.5 13.5 18.0 15
0.1 µF - 410 5.5 11.5 7.5 5 5.5 10.5 13.0 10 6.5 11.5 13.0 10 7.5 13.5 18.0 15 8.5 17.5 18.0 15
0.15 µF- 415----6.511.513.0106.512.518.0158.517.518.0158.516.526.522.5
0.22 µF- 422----6.512.518.0157.513.518.01510.517.518.01510.518.526.522.5
0.33 µF- 433----6.512.518.0158.514.518.01510.518.526.522.511.021.026.522.5
0.47 µF- 447----7.513.518.0158.517.518.01511.021.026.522.513.523.531.527.5
0.68 µF- 468----8.517.518.0158.516.526.522.511.021.031.027.516.529.531.527.5
1.0 µF- 510----7.515.526.522.510.518.526.522.513.523.531.527.516.529.531.527.5
1.5 µF- 515----10.518.526.522.511.520.531.527.516.529.531.527.518.032.541.537.5
2.2 µF- 522----11.021.031.027.513.523.531.527.516.028.541.537.520.040.042.537.5
3.3 µF- 533----13.523.531.527.516.529.531.527.520.040.042.537.5----
4.7 µF- 547----12.522.541.537.516.028.541.537.520.040.042.537.5----
6.8 µF- 568----16.028.541.537.518.032.541.537.537.5-------
10.0 µF- 610----18.032.541.537.520.040.042.537.5--------
LETTER
CODE
TYPE OF
PAC KAG ING
HEIGHT (H)
(mm)
REEL
DIAMETER
(mm)
ORDERING CODE
EXAMPLES
PCM
7.5 to 10
PCM
15
PCM
22.5 to 27.5
PCM
37.5
D Ammo 16.5 S (1) MKP 1840-310-405-D X X - -
G Ammo 18.5 S (1) MKP 1840-310-405-G X X - -
F Reel 16.5 350 MKP 1840-310-405-F X X - -
W Reel 18.5 350 MKP 1840-310-405-W X X - -
V Reel 18.5 500 MKP 1840-522-255-V - X X -
G Ammo 18.5 L (2) MKP 1840-522-255-G - - X -
- Bulk - - MKP 1840-547-255 XXXX
Document Number: 26061 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 30-Nov-10 149
MKP 1840
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type Vishay Roederstein
4700
0.01
0.0330.047 0.1
100
7
5
3
2
10
7
5
3
2
1
10323 57 2
10435710523 57
106
VRMS
f [Hz]
Permissible AC Voltage versus Frequency
Capacitance in pF and µF
100 VDC
2.2
0.033
0.047
10
4.7
1.0
0.47
0.2
2
0.1
10323 57 2
10435710523 57
106
V
RMS
f [Hz]
Permissible AC Voltage versus Frequency
Capacitance in µF
160 VDC
5
3
2
100
7
5
3
2
10
7
5
3
2
1
2.2
10
4.7
1.0
0.22
0.1
0.01
0.022 0.047
0.47
10323 57 2
104357 10523 57
106
VRMS
f [Hz]
Permissible AC Voltage versus Frequency
Capacitance in µF
250 V
DC
5
3
2
100
7
5
3
2
10
7
5
3
2
1
0.01
0.022
0.047
0.1
0.22
0.47
1.0
2.2
3.3
10
3
23 57 2
10435710
5
23 57
10
6
VRMS
f [Hz]
Permissible AC Voltage versus Frequency
Capacitance in µF
400 VDC
5
3
2
100
7
5
3
2
10
7
5
3
2
1
VRMS
0.01
0.047
0.22
0.1
0.47
2.2
1.0
0.022
10
3
23 57 2
10
4
357 10
5
23 57
10
6
f [Hz]
Permissible AC Voltage versus Frequency
Capacitance in µF
630 V
DC
5
3
2
100
7
5
3
2
10
7
5
3
2
1
6.8μF
3
.3 μF
5
.1 μF
06
.8μF
.
03
3μF
60.0 8μF
0.015μF
30.0 3μF
0.15μF
Impedance versus Frequency Z = f (f)
(Lead length 2.0mm)
0.1
7
5
3
2
2
0.001
[MHz]
0.01 5
0.1 5 1.0
5 10 5
10
7
5
3
2
1.0
7
5
3
2
0.01
7
5
3
100
Z (Ω)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
