October 19, 2009 100321 Low Power 9-Bit Inverter General Description Features The 100321 is a monolithic 9-bit inverter. The device contains nine inverting buffer gates with single input and output. All inputs have 50 k pull-down resistors. Logic Symbol Connection Diagrams 30% power reduction of the 100121 2000V ESD protection Pin/function compatible with 100121 Voltage compensated operating range = -4.2V to -5.7V Available to MIL-STD-883 24-Pin DIP 10030902 24-Pin Quad Cerpak 10030901 Pin Names Description D1-D9 Data Inputs O1-O9 Data Outputs 10030903 (c) 2009 National Semiconductor Corporation 100309 100309 Version 2 Revision 4 www.national.com Print Date/Time: 2009/10/19 22:13:17 100321 Low Power 9-Bit Inverter OBSOLETE 100321 Recommended Operating Conditions Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Case Temperature (TC) Military Supply Voltage (VEE) Above which the useful life may be impaired Storage Temperature (TSTG) -65C to +150C Maximum Junction Temperature (TJ) Ceramic +175C Plastic +150C VEE Pin Potential to Ground Pin -7.0V to +0.5V Input Voltage (DC) VEE to +0.5V Output Current (DC Output HIGH) -50 mA ESD (Note 2) 2000V -55C to +125C -5.7V to -4.2V Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functonal operation under these conditions is not implied. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Military Version DC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = -55C to +125C Symbol VOH Parameter Output HIGH Voltage Min Max Units TC -1025 -870 mV OC to Conditions Notes +125C VOL Output LOW Voltage -1085 -870 mV -55C VIN = VIH (Max) Loading with -1830 -1620 mV 0C to or VIL (Min) 50 to -2.0V (Note 3, Note 4, Note 5) +125C -1830 VOHC Output HIGH Voltage -1555 -1035 mV -55C 0C to mV +125C mV -55C VIN = VIH (Min) Loading with -1610 mV 0C to or VIL (Max) 50 to -2.0V -1555 mV -55C -870 mV -55C to Guaranteed HIGH Signal +125C for All Inputs -55C to Guaranteed LOW Signal +125C for All Inputs -55C to VEE = -4.2V +125C VIN = VIL (Min) -1085 VOLC Output LOW Voltage (Note 3, Note 4, Note 5) +125C VIH VIL IIL Input HIGH Voltage Input LOW Voltage Input LOW Current IIH IEE -1165 -1830 240 -70 mV A 0.50 Input HIGH Current Power Supply Current -1475 A (Note 3, Note 4, Note 5, Note 6) (Note 3, Note 4, Note 5, Note 6) (Note 3, Note 4, Note 5) 0C to +125C VEE = -5.7V VIN = VIH (Max) 340 A -55C -25 mA -55C to Inputs Open +125C (Note 3, Note 4, Note 5) (Note 3, Note 4, Note 5) Note 3: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals -55C), then testing immediately without allowing for the junction temperature to stabilize due to heat dissipation after power-up. This provides "cold start" specs which can be considered a worst case condition at cold temperatures. Note 4: Screen tested 100% on each device at -55C, +25C, and +125C, Subgroups 1, 2, 3, 7, and 8. Note 5: Sample tested (Method 5005, Table I) on each manufactured lot at -55C, +25C and +125C, Subgroups A1, 2, 3, 7, and 8. Note 6: Guaranteed by applying specified input condition and testing VOH/VOL. www.national.com 2 100309 Version 2 Revision 4 Print Date/Time: 2009/10/19 22:13:17 100321 AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol TC = -55C TC = +25C TC = +125C Min Max Min Max Min Max 0.30 1.80 0.40 1.60 0.40 1.80 ns 0.30 1.20 0.30 1.20 0.30 1.20 ns Parameter tPLH Propagation Delay tPHL Data to Output tTLH Transition Time tTHL 20% to 80%, 80% to 20% Units Conditions Notes (Note 7, Note 8, Note 9, Note 11) Figures 1, 2 (Note 10) Note 7: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals -55C), then testing immediately after power-up. This provides "cold start" specs which can be considered a worst case condition at cold temperatures. Note 8: Screen tested 100% on each device at +25C temperature only, Subgroup A9. Note 9: Sample tested (Method 5005, Table I) on each mfg. lot at +25C, Subgroup A9, and at +125C and -55C temperatures, Subgroups A10 and A11. Note 10: Not tested at +25C, +125C, and -55C temperature (design characterization data). Note 11: The propagation delay specified is for single output switching. Delays may vary up to 200 ps with multiple outputs switching. Test Circuitry 10030905 Notes: VCC, VCCA = +2V, VEE = -2.5V L1 and L2 = equal length 50 impedance lines RT = 50 terminator internal to scope Decoupling 0.1 F from GND to VCC and VEE All unused outputs are loaded with 50 to GND CL = Fixture and stray capacitance 3 pF FIGURE 1. AC Test Circuit 3 100309 Version 2 Revision 4 Print Date/Time: 2009/10/19 22:13:17 www.national.com 100321 Switching Waveforms 10030906 FIGURE 2. Propagation Delay and Transition Times www.national.com 4 100309 Version 2 Revision 4 Print Date/Time: 2009/10/19 22:13:17 100321 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Ceramic Dual-In-Line Package (D) NS Package Number J24E 24-Lead Quad Cerpak (F) NS Package Number W24B 5 100309 Version 2 Revision 4 Print Date/Time: 2009/10/19 22:13:17 www.national.com 100321 Low Power 9-Bit Inverter Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH(R) Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage Reference www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Solutions www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise(R) Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagicTM www.national.com/solarmagic Wireless (PLL/VCO) www.national.com/wireless www.national.com/training PowerWise(R) Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION ("NATIONAL") PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL'S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright(c) 2009 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com www.national.com Tel: 1-800-272-9959 National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com 100309 Version 2 Revision 4 National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com Print Date/Time: 2009/10/19 22:13:18 National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com