F-212 SUPPLEMENT ERCDA-025-03.75-1SS-TD-TU TM (0,80mm) .0315" ERCDA-013-03.75-1SE-TD-TU ERCDA SERIES TM EDGE RATE COAX CABLE ASSEMBLIES FEATURES Mates with: ERF8(-L) Edge wiping contacts for reduced broadside coupling * Direct Termination, no PCB * Edge RateTM contact * Latching * 34 AWG micro coax for higher performance * Hot swappable SPECIFICATIONSi Hot swappable 34 AWG micro coax APPLICATION Signal lead For complete specifications and recommended PCB layouts see www.samtec.com?ERCDA Cable: 34 AWG micro coax Signal Routing: 50 Single-Ended Plating: Au over 50" (1,27m) Ni Operating Temp Range: -40C to +105C RoHS Compliant: Yes Conductor Dielectric Shield Insulator Ground Patent Pending (0,80mm) .0315" pitch WIRE LENGTH NO. OF POSITIONS PER ROW ERCDA * Edge RateTM contacts Rugged friction lock WIRE OPTION * Friction locks END NO. 1 END NO. 2 APPLICATION -013, -025 -"XX.XX" (See chart for number of I/Os) = Wire Length in Inches (43,7mm) 01.72" minimum POSITIONS WIRE PER ROW OPTION 1SE 1SS 1SE 1SS -013 -025 I/Os 12 26 24 50 -1SE -TD -TU = GSGSG = Terminal, Pin 1 Down = Terminal, Pin 1 Up -1SS = SSSSS ASSEMBLY LENGTH = WIRE LENGTH XX.XX + (14,58) .574 ALSO AVAILABLE Additional cable designs in development. Call Samtec. B A Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. Note: Verify part number and correct wiring scheme with Samtec's Interactive Cable Builder at www.samtec.com/cable_ builder/pitch.aspx Note: Some lengths, styles and options are non-standard, non-returnable. 02 01 01 02 (17,76) .699 POSITIONS PER ROW A (4,56) .180 B -013 (14,60) (22,70) .894 .575 -025 (24,20) (32,30) 1.272 .953 (6,60) .260 -1SE SHOWN WWW.SAMTEC.COM -1SS SHOWN