INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT238 3-to-8 line decoder/demultiplexer Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 provide 8 mutually exclusive active HIGH outputs (Y0 to Y7). The "238" features three enable inputs: two active LOW (E1 and E2) and one active HIGH (E3). Every output will be LOW unless E1 and E2 are LOW and E3 is HIGH. FEATURES * Demultiplexing capability * Multiple input enable for easy expansion * Ideal for memory chip select decoding * Active HIGH mutually exclusive outputs This multiple enable function allows easy parallel expansion of the "238" to a 1-of-32 (5 lines to 32 lines) decoder with just four "238" ICs and one inverter. * Output capability: standard * ICC category: MSI The "238" can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Unused enable inputs must be permanently tied to their appropriate active HIGH or LOW state. GENERAL DESCRIPTION The 74HC/HCT238 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The "238" is identical to the "138" but has non-inverting outputs. The 74HC/HCT238 decoders accept three binary weighted address inputs (A0, A1, A2) and when enabled, QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL tPHL/ tPLH PARAMETER CONDITIONS HCT An to Yn 14 18 ns E3 to Yn 16 20 ns En to Yn 17 21 ns 3.5 3.5 pF 72 76 pF propagation delay CI input capacitance CPD power dissipation capacitance per package CL = 15 pF; VCC = 5 V notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC - 1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". December 1990 UNIT HC 2 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 2, 3 A0 to A2 address inputs 4, 5 E1, E2 enable inputs (active LOW) 6 E3 enable input (active HIGH) 8 GND ground (0 V) 15, 14, 13, 12, 11, 10, 9, 7 Y0 to Y7 outputs (active HIGH) 16 VCC positive supply voltage Fig.1 Pin configuration. Fig.2 Logic symbol. (a) (b) Fig.3 IEC logic symbol. December 1990 3 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 Fig.4 Functional diagram. Fig.5 Logic diagram. FUNCTION TABLE INPUTS E1 E2 E3 OUTPUTS A0 A1 A2 Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 H X X X H X X X L X X X X X X X X X L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H H H H L H L H L L H H L L L L H L L L L H L L L L H L L L L H L L L L L L L L L L L L L L L L L L L L L L L L H H H H L H L H L L H H H H H H L L L L L L L L L L L L L L L L H L L L L H L L L L H L L L L H Note 1. H = HIGH voltage level L = LOW voltage level X = don't care December 1990 4 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 DC CHARACTERISTICS FOR 74HC For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 min. typ. -40 to +85 max. min. max. -40 to +125 min. UNIT V WAVEFORMS CC (V) max. tPHL/ tPLH propagation delay An to Yn 47 17 14 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.6 tPHL/ tPLH propagation delay E3 to Yn 52 19 15 160 32 27 200 40 34 240 48 41 ns 2.0 4.5 6.0 Fig.6 tPHL/ tPLH propagation delay En to Yn 50 18 14 155 31 26 195 39 33 235 47 40 ns 2.0 4.5 6.0 Fig.7 tTHL/ tTLH output transition time 19 7 6 75 15 13 95 19 16 110 22 19 ns 2.0 4.5 6.0 Figs 6 and 7 December 1990 5 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT An En E3 0.70 0.40 1.45 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 min. typ. -40 to +85 max. min. max. -40 to +125 min. UNIT V WAVEFORMS CC (V) max. tPHL propagation delay An to Yn 21 35 44 53 ns 4.5 Fig.6 tPLH propagation delay An to Yn 17 35 44 53 ns 4.5 Fig.6 tPHL propagation delay E3 to Yn 22 37 46 56 ns 4.5 Fig.6 tPLH propagation delay E3 to Yn 18 37 46 56 ns 4.5 Fig.6 tPHL propagation delay En to Yn 21 35 44 53 ns 4.5 Fig.7 tPLH propagation delay En to Yn 18 35 44 53 ns 4.5 Fig.7 tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Figs 6 and 7 December 1990 6 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer 74HC/HCT238 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.6 Waveforms showing the address input (An) and enable input (E3) to output (Yn) propagation delays and the output transition times. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.7 Waveforms showing the enable input (En) to output (Yn) propagation delays and the output transition times. PACKAGE OUTLINES See "74HC/HCT/HCU/HCMOS Logic Package Outlines". December 1990 7