PRODUCT: RHEF900 PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com DOCUMENT: SCD 25585 PCN: A54309 REV LETTER: C REV DATE: AUGUST 14, 2007 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: RELEASED Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper Part Marking: TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -16.5 -25.7 -(0.65) -(1.01) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD RATED CURRENT CURRENT RATINGS AMPS AT 25C HOLD 9.0 AMPS AT 25C HOLD TRIP 9.0 16.5 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: ONE-HOUR POST-TRIP RESISTANCE STANDARD TRIP SECONDS AT OHMS OHMS 25C,45A AT 25C AT 25C MAX MIN MAX MAX 10.0 0.0074 0.0120 0.017 TIME TO TRIP INITIAL RESISTANCE VALUES UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant NOMINAL TRIPPED POWER DISSIPATION WATTS AT 25C 16V TYP 5.0 ELV Compliant (c) 2004, 2007 Tyco Electronics Corporation. All rights reserved. Pb-Free