SPECIFICATION CONTROL DRAWING Product Revision Product Name D-100-31 K L max 17.25 (0.680) Product Dimensions oA oB min min 2.7 3.15 (0.105) (0.125) Cable Dimensions oE oG min max 1.4 2.7 (0.055) (0.105) oD max 3.15 (0.125) J0.5 (J0.02) 7 (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue. 4. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray. APPLICATION 1. This part is designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed, having nickel plated copper shields. 2. Install using Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70. 3. Assemblies will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747. 2. Temperature range: -55C to +150C. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE* SHIELD TERMINATOR DOCUMENT NO.: D-100-31 DCR NUMBER: REPLACES: D990170 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 03/22/99 SEE TABLE 2 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: None D961398 SIZE: A SHEET: 1 of 1