Amperite Time Delay Relays and Flashers Delay on Release TDRs Flashers (Low Cost 10 Amp Flasher) CR Series TDR DF10 Series The CR Series has solid state analog circuitry with SPDT relay output. Triggered delay on release timing mode. Compact size. Timing Selection: Knob adjustable potentiometer or fixed. UL file #E96739(M). CSA File #LR62586. Contact Rating: 1/2 amp @ 110-120 VAC, 1 amp @ 32 VDC. Operating Temperature Range: 25C to +60C. Mounting: Single screw or optional 2-screw panel mount. Stock No. Mfr.Os Type Delay in Seconds Input Voltage Mode of Operation* EACH 892-0063 892-0066 892-0067 892-0069 892-0071 115ASPDTR1-120C 12DNOR1-120C 12DSPDTR1-120C 24ASPDTR1-120C 24DSPDTR1-120C 1-120 1-120 1-120 1-120 1-120 115 VAC 12 VDC 12 VDC 24 VAC 24 VDC SPDT N.O. SPDT SPDT SPDT 31.89 28.97 31.89 31.89 32.71 *N.C. = Normally closed contacts, N.O. = Normally open contacts, SPDT = Single pole double throw contacts. CR10 Series (Low Cost 10 Amp TDR) The CR10 Series has solid state analog circuitry with DPDT relay output. Triggered delay on release timing mode. Timing Selection: Knob adjustable potentiometer or fixed. UL file #E96739(M). CSA File #LR62586-3. Contact Rating: 10 amps @ 240 VAC res. Operating Temperature Range: 45C to +70C. Mounting: 11-pin octal style plug. Spade terminal style available. Mfr.Os Type Delay in Seconds Input Voltage EACH 892-0077 892-0080 892-0081 892-0084 892-0085 120APR1-120C 12DPR120-240C 12DPR1-120C 24DPR120-240C 24DPR1-120C 1-120 120-240 1-120 120-240 1-120 120 VAC 12 VDC 12 VDC 24 VDC 24 VDC 49.71 49.71 46.73 46.73 46.73 Note: New Amperite products are continuously available. Call Allied for availability and for information on custom termination, voltages and timing, as well as accessories. DCR10 Series Delay On Release TDR The DCR10 has CMOS digital circuitry with DPDT relay output. Delay on Release timing mode. Timing Selection: Knob adjustable potentiometer or fixed. UL File #E96739(M). CSA File #LR62586. Contact Rating: 10 A at 240 V AC res. Operating Temperature Range: 45C-+70C. Mounting: 11-pin octal style plug. Spade terminal style available. Stock No. Mfr.Os Type Delay Time Voltage EACH 892-1201 892-1002 892-1003 892-1005 120AP.1-10SDCR10 120AP1-60HDCR10 12DP.1-10SDCR10 24DP.1-10SDCR10 .1-10 sec. 1-60 hrs. .1-10 sec. .1-10 sec. 120 AC 120 AC 12 DC 24 DC 62.53 59.39 59.39 59.39 Triggered Delay-On-Release Time Delay Relays The STB Series triggered delay-on-release time delay relay has CMOS digital timing circuitry. Units are 100% solid state with no moving parts to wear out. The relay is packaged in the popular hockey puck enclosure, epoxy sealed. Timing can be factory fixed or adjustable by use of a user supplied resistor or potentiometer. Contact Rating: 2 amp continuous load. Mounting: Single center hole mount. Timing Tolerance: Fixed units 10%. Repeatability: 2%. Timing Cycle Interrupt Transfer: None. UL and CSA approval pending. Delay in Seconds 892-2000 892-2001 892-2002 892-2003 892-2004 892-2005 120A.1-10SSTB 120A1-100SSTB 12D.1-10SSTB 12D1-100SSTB 24D.1-10SSTB 24D1-100SSTB .1-10 1-100 .1-10 1-100 .1-10 1-100 The DF10 Series has solid state analog circuitry with DPDT relay output. Recycle timer/flasher timing mode. Timing Selection: fixed flash rates. Duty Cycle: 50% UL File #E96739(M).CSA File #LR62586. Contact Rating: 10 amps @ 240 VAC res. Operating Temperature Range: 45C to +70C. Mounting: 8-pin octal style plug. Spade terminal style available. Stock No. Mfr.Os Type Flash Rate F.P.M. 892-0117 892-0118 892-0121 892-0123 892-0125 120AF60DF10 120AF90DF10 12DF60DF10 24AF60DF10 24DF60DF10 60 90 60 60 60 Input Voltage Mode of EACH Operation 120 VAC 120 VAC 12 VDC 24 VAC 24 VDC Flasher Flasher Flasher Flasher Flasher The D Series are solid state analog flashing devices. No moving parts to wear out. 2 amp rating. Output: AC units N Triac; DC units N transistor. Low costcompact size. 3 terminal configuration. No current leakage to load. Fixed flash rates. Duty Cycle: 50%. UL File #E96739(M). CSA File #LR62586. Operating Temperature Range: 23C to +60C. Mounting: Single screw or optional 2 screw panel mount. 892-0133 892-0134 892-0137 892-0138 892-0142 115AF60D 115AF90D 12DF30D 12DF60D 24DF60D 60 90 30 60 60 115 VAC 115 VAC 12 VDC 12 VDC 24 VDC Flasher Flasher Flasher Flasher Flasher 20.01 20.01 20.01 20.01 20.01 DF Series 892-0144 892-0145 892-0146 892-0147 Mfr.Os Type Flash Rate F.P.M. Input Voltage EACH 892-1016 892-1017 892-1018 120AF10-120DFV 24DF10-120DFV 12DF10-120DFV 10-120 10-120 10-120 120 AC 24 DC 12 DC 42.70 42.70 42.70 Adjustable Recycle Time Delay Relays (Flashers) HDFA Series Adjustable Recycle Timers The HDFA Series low cost adjustable recycling timers are packaged in the familiar hockey-puck enclosure and may be used to alternately switch power to two independent loads. Both OFF and ON times are independently adjustable by means of built-in potentiometers. Load power is controlled by an isolated SPDT relay contact. Timing ranges are adjustable of a 100:1 span and cover 0.25 seconds to 100 minutes. Contact Rating: 10 amperes maximum @ 250 VAC or 30 VDC. Operating Temperature Range: 40C to 65C. Mounting: Single center hole mount. Timing Cycle Interrupt Transfer: None. UL and CSA approval pending. 24-120F30DF 24-120F45DF 24-120F60DF 24-120F90DF Input Mode of Voltage Operation* EACH 120 AC 120 AC 12 DC 12 DC 24 DC 24 DC 24.94 24.94 24.94 24.94 24.94 24.94 *N.O. = Normally open contacts. Relay Accessories For use with C10, CI, DC10, DF10, DFA, DFV, DOD, G, SWDC and SWPDC series. 892-9998. 8-PIN-SM. 8 pin surface mount socket...........................EACH 6.22 For use with CR10, CIR, DCR10 and SWUDC series. 892-9999. 11-PIN-SM. 11 pin surface mound socket .....................EACH 10.72 For use with B, BF, D, DF and Fixed C and CR series. 892-1000. PANEL MOUNT. Non-adjustable 2-screw bracket ..........EACH 1.24 For use with adjustable C and CR series. 892-1140. PMCR BRACK..................................................................EACH 1.24 Stock No. Mfr.Os Type 892-2012 892-2013 892-2014 892-2015 892-2016 892-2017 892-2018 892-2019 892-2020 120AA/AHDFA 120AC/CHDFA 120AF/FHDFA 12DA/AHDFA 12DC/CHDFA 12DF/FHDFA 24DA/AHDFA 24DC/CHDFA 24DF/FHDFA Recycle Delay Input Voltage .25-10 sec. 120 VAC .6-60 sec. 120 VAC 1-100 min. 120 VAC .25-10 sec. 12 VDC .6-60 sec. 12 VDC 1-100 min. 12 VDC .25-10 sec. 24 VDC .6-60 sec. 24 VDC 1-100 min. 24 VDC Mode of Operation* EACH SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT 40.49 40.49 40.49 40.49 40.49 40.49 40.49 40.49 40.49 *SPDT = Single pole double throw contacts. DFA Series Adjustable Recycle Timer 30 45 60 90 24-120 VAC/DC 24-120 VAC/DC 24-120 VAC/DC 24-120 VAC/DC Flasher Flasher Flasher Flasher 18.93 18.93 18.93 18.93 DFS Series N.O. N.O. N.O. N.O. N.O. N.O. Stock No. 44.82 44.82 44.82 44.82 44.82 The DF Series are totally encapsulated solid state analog flashing devices. Universal Input: 24 V to 120 V AC or DC operation in one device. No moving parts to wear out. 2 amp rating. Low cost N compact size. 2 terminal configuration N easy connection to load. Fixed flash rates. Duty Cycle: 50% UL File #D96739(M). CSA File #LR62586. Operating Temperature Range: 23C to +60C. Mounting: Single screw or optional 2 screw panel mount. STB Series Delay-On-Release TDRs Mfr.Os Type The DFV has solid state analog circuitry with DPDT relay output. Adjustable Flasher Circuitry. Flash Rate Timing Selection: Knob adjustable potentiometer. UL File No. E96739 (M). CSA File No. LR62586. Contact Rating: 10 A at 240 V AC res. Operating Temperature Range: 45C to +70C. Mounting: 8-pin octal style plug. Spade terminal style available. D Series Stock No. Stock No. DFV Series Adjustable Flasher The DFA has CMOS digital circuitry with DPDT relay output. Adjustable Recycle timing mode. Timing Selection: Two knob adjustable potentiometers or fixed. UL File No. E96739 (M). CSA File No. LR62586. Contact Rating: 10 A at 240 V AC res. Operating Temperature Range: 45C to +70C. Mounting: 8-pin octal style plug. Spade terminal style available. Stock No. Mfr.Os Type Delay Time Voltage EACH 892-1009 892-1010 892-1011 892-1012 120AA/ADFA 120AF/FDFA 24DA/ADFA 12DF/FDFA .1-10 sec. 1-100 min. .1-10 sec. 1-100 min. 120 AC 120 AC 24 DC 12 DC 60.83 60.83 60.83 60.83 Stop-Alert Lamp Pulsator The DFS series are CMOS digital three terminal flashers that are packaged in the familiar 2 2 3/4" hockey puck enclosure, epoxy sealed. Load Current Ratings: 3 A and 12 A available. Flash Rate: Fixed and can be customer specified over a range of 1 to 1,000 flashes per minute with a 50% duty cycle. UL File #E96739(M). CSA File #LR62586. Operating Temperature: 23C to +60C. Mounting: Center hole. 892-1127 892-1128 892-1129 892-1130 892-1131 892-1132 892-1133 892-1134 892-1135 892-1136 892-1137 892-1138 DFS152-60* DFS152-90* DFS154-60 DFS154-90 DFS219-60* DFS219-90* DFS220-60 DFS220-90 DFS224-60* DFS224-90* DFS225-60 DFS225-90 60 90 60 90 60 90 60 90 60 90 60 90 120 VAC 120 VAC 120 VAC 120 VAC 12 VDC 12 VDC 12 VDC 12 VDC 24 VDC 24 VDC 24 VDC 24 VDC *3 A. 12 A. For Fast, Dependable Service, Make Just One Call N 1-800-433-5700 Flasher Flasher Flasher Flasher Flasher Flasher Flasher Flasher Flasher Flasher Flasher Flasher 34.13 34.13 42.68 42.68 34.13 34.13 42.68 42.68 34.13 34.13 42.68 42.68 Two terminal solid state vehicular lamp enhancement device. Timing Mode: 5 pulses per second @ 85% duty cycle. Power Rating: 60 W continuous, 120 W intermittent. Operating Temperature: 40C to +60C. Mounting: Single screw or 2 hole panel mount adapter available. Stock No. Mfr.Os Type Flash Rate F.P.M. Input Voltage Power Rating EACH 892-1139 STOP-ALERT 300 12 VDC 60 W 18.93 ALLIED c 105 4