AEL20US05 - XP POWER - Datasheet.Live

ACDC

Specification

1580 Watts

•Energy Efficiency Level V

•CEC 2008 and EISA 2007 Compliant

•Limited Power Source Approval

•China Compulsory Certification (CCC) Qualified

•+60 °C Operating Temperature

•Compact Dimensions

•3 Year Warranty

AEL Series

Input

Input Voltage • 90-264 VAC

Input Frequency • 47-63 Hz

Input Current • AEL15/20: 0.4 A max at 115 VAC

AEL40: 1.0 A max at 115 VAC

AEL60: 1.6 A max at 115 VAC

AEL80: 1.1 A max at 115 VAC

Inrush Current • AEL15/20: 15/30 A max for 115/230 VAC,

AEL40: 25/50 A max for 115/230 VAC,

AEL60: 35/70 A max for 115/230 VAC,

AEL80: 45/92 A max for 115/230 VAC,

cold start at 25 °C

Earth Leakage Current • 0.75 mA at 240 VAC

Power Factor • EN61000-3-2, Class A

Input Protection • Internal fuse in line,

AEL15/20: T1 A, 250 V

AEL40: T2 A, 250 V

AEL60/80: T3.15 A, 250 V

No Load Input Power • 0.5 W maximum, model dependent

Output

Output Voltage • See tables

Minimum Load • No minimum load required

Hold Up Time • AEL15: 5 ms min, AEL20/40: 12 ms min,

AEL60/80: 16 ms min, at full load

110 VAC

Start Up Delay • AEL20/40: 0.5 s, AEL15/60/80: 2.0 s

max at full load 100 VAC

Transient Response • 2% max deviation, recovery to within 1%

of nominal in 500 µs for 50% load change

Line Regulation • See tables

Load Regulation • See tables

Ripple & Noise • 1% pk-pk, 20 MHz bandwidth

Overvoltage Protection • 112-132% (AEL40/60/80 only)

Overload Protection • 110-150% (AEL20/40/60/80 only)

Short Circuit Protection • Trip & restart (hiccup mode),

auto recovery

Temperature • ±0.04%/°C

Coefficient

xppower.com

General

Efficiency • See tables

Energy Efficiency • Model dependent, see tables

Isolation • 3000 VAC Input to Output

1500 VAC Input to Ground*

500 VDC Output to Ground*

*Not C8 version

All class I models available with output

negative connected to ground. See notes.

Switching Frequency • 63 kHz typical

MTBF • >100 kHrs to MIL-HDBK-217F

at 25 °C, GB

Environmental

Operating Temperature • -20 °C to +60 °C, derate linearly from

100% power at +40 °C to 50% power at

+60 °C

Storage Temperature • -40 °C to +85 °C

Cooling • Convection cooled

Operating Humidity • 5-95% RH, non-condensing

Operating Altitude • 2000 m

Shock • 10 g, 10 ms on 3 axes

EMC & Safety

Emissions • EN55022 level B conducted & radiated

Harmonic Current • EN61000-3-2 class A

Voltage Flicker • EN61000-3-3

ESD Immunity • EN61000-4-2 Level 2 (contact) Perf Criteria A

EN61000-4-2 Level 3 (air) Perf Criteria A

Radiated Immunity • EN61000-4-3, 3 V/m, Perf criteria A

EFT/Burst • EN61000-4-4, level 2, Perf criteria A

Surge • EN61000-4-5, installation class 3,

Perf criteria A

Conducted Immunity • EN61000-4-6, level 2, Perf criteria A

Magnetic Field • EN61000-4-8, 1 A/m, Perf criteria A

Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms,

100% 5000 ms Perf Criteria A, B, B

Safety Approvals • EN60950-1: UL/cUL60950-1,

Approved as Limited Power Source

(AEL15-60 only), China Compulsory

Certification (CCC) qualified.

ACDC

AEL15

Models and Ratings

Notes

1. Standard input connector is IEC320-C14 Inlet. For optional IEC320-C6 Inlet, add suffix “C6” to model number e.g. AEL15US12C6.

2. Total regulation includes line regulation and load regulation.

3. Other output voltages available, contact sales for details.

4. Energy Efficiency Level IV.

5. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.

6. For output negative connected to ground add suffix G.

Output Power Output Voltage (3) Output Current Total Regulation(2) Efficiency(5) Model Number(1,6)

8W3.3 VDC 2.50 A 7%68% AEL15US03(4)

12 W 5.0 VDC 2.40 A 7% 78% AEL15US05

15 W

8.0 VDC 1.87 A 5%79% AEL15US08

9.0 VDC 1.66 A 5% 79% AEL15US09

12.0 VDC 1.25 A 5%80% AEL15US12

15.0 VDC 1.00 A 5% 81% AEL15US15

18.0 VDC 0.83 A 5%82% AEL15US18

24.0 VDC 0.62 A 5%78% AEL15US24(4)

30.0 VDC 0.50 A 5%77% AEL15US30(4)

36.0 VDC 0.42 A 3%75% AEL15US36(4)

48.0 VDC 0.31 A 3%81% AEL15US48

1. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.

2. Output connector: is 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).

3. Output cable length is 48” (1220mm) approx.

4. Weight: 0.36 lbs (165 g)

5. For European mains lead order part: EU-MAINS-IEC or EU-MAINS-5 for C6 version.

6. For UK mains lead order part: UK-MAINS-IEC or UK-MAINS-5 for C6 version.

7. For US mains lead order part: US-MAINS-IEC or US-MAINS-5 for C6 version.

8. Mains lead length is 78“ (2000 mm) approx

Notes

1.50 (38.0)

3.58 (91.0)

AC INPUT

IEC-320-C14 INLET

AC INPUT

IEC-320-C6 INLET

1.42 (36.0)

Mechanical Details

ACDC

AEL20

Models and Ratings

Notes

1. For optional class II version on AEL20 models only, add suffix ‘C2’ to model number e.g. AEL20US12C2.

2. Total regulation includes line regulation and load regulation.

3. Other output voltages available, contact sales for details.

4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.

5. For output negative connected to ground add suffix -G.

Output Power Output Voltage(3) Output Current Total Regulation(2) Efficiency(4) Model Number(1,5)

15 W 5VDC 3.00 A 5%79% AEL20US05

20 W

12 VDC 1.67 A 4%86% AEL20US12

15 VDC 1.33 A 4%85% AEL20US15

24 VDC 0.83 A 3%87% AEL20US24

30 VDC 0.67 A 3%86% AEL20US30

48 VDC 0.42 A 3%87% AEL20US48

1. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.

2. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).

3. Output cable length is 48” (1220mm) approx.

4. Weight: 0.37 lbs (170 g)

5. For European mains lead order part: EU-MAINS-C5 for AEL20, EU-MAINS-8 for AEL20 Class II.

6. For UK mains lead order part: UK-MAINS-5 for AEL20, UK-MAINS-8 for AEL20 Class II.

7. For US mains lead order part: US-MAINS-5 for AEL20, US-MAINS-8 for AEL20 Class II.

8. Mains lead length is 78“ (2000 mm) approx

Notes

1.22 (31.0)

0.04 (1.0)

AC INPUT

IEC-320-C6 INLET

AC INPUT

IEC-320-C8 INLET

3.90 (99.0) 0.02 (0.5)

1.65 (42.0)

(Optional C2 Version)

Mechanical Details

ACDC

AEL40

Models and Ratings

Output Power Output Voltage(2) Output Current Total Regulation(1) Efficiency(4) Model Number(5)

25 W 5VDC 5.00 A 7%79% AEL40US05(3)

35 W 8VDC 4.37 A 5%82% AEL40US08(3)

9VDC 3.88 A 5%83% AEL40US09(3)

40 W

12 VDC 3.33 A 5%87% AEL40US12

15 VDC 2.67 A 5%87% AEL40US15

18 VDC 2.22 A 5%86% AEL40US18

24 VDC 1.67 A 3%86% AEL40US24

36 VDC 1.11 A 3%89% AEL40US36

48 VDC 0.83 A 3% 91% AEL40US48

Notes

1. Total regulation includes line regulation and load regulation.

2. Other output voltages available, contact sales for details.

3. Energy Efficiency Level IV

4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.

5. For output negative connected to ground add suffix -G.

1. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.

2. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).

3. Output cable length is 48” (1220mm) approx.

4. Weight: 0.64 lbs (275 g).

5. For European mains lead order part: EU-MAINS-IEC.

6. For UK mains lead order part: UK-MAINS-IEC.

7. For US mains lead order part: US-MAINS-IEC.

8. Mains lead length is 78“ (2000 mm) approx

Notes

4.65 (118.0)

1.36 (34.5)

2.05 (52.0)

0.02 (0.5)

AC INPUT

IEC-320-C14 INLET

0.04 (1.0)

Mechanical Details

AEL60

Notes

1. Total regulation includes line regulation and load regulation.

2. Other output voltages available, contact sales for details.

3. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.

4. For output negative connected to ground add suffix -G.

1. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.

2. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).

3. Output cable length is 48” (1220mm) approx.

4. Weight: 0.79 lbs (340 g).

5. For European mains lead order part: EU-MAINS-IEC.

6. For UK mains lead order part: UK-MAINS-IEC.

7. For US mains lead order part: US-MAINS-IEC.

8. Mains lead length is 78“ (2000 mm) approx

Notes

4.65 (118.0)

1.36 (34.5)

2.05 (52.0)

0.02 (0.5)

AC INPUT

IEC-320-C14 INLET

0.04 (1.0)

Models and Ratings

Max Output Power Output Voltage(2) Output Current Total Regulation(1) Efficiency(3) Model Number(4)

57 W 12 VDC 4.75 A 5%87% AEL60US12

63 W

15 VDC 4.20 A 5%88% AEL60US15

18 VDC 3.50 A 5%88% AEL60US18

24 VDC 2.63 A 5%88% AEL60US24

30 VDC 2.15 A 5%90% AEL60US30

36 VDC 1.75 A 3%90% AEL60US36

48 VDC 1.31 A 3%90% AEL60US48

Mechanical Details

ACDC

28-Aug-14

AEL80

Models and Ratings

Notes

1. Total regulation includes line regulation and load regulation.

2. Other output voltages available, contact sales for details.

3. Energy Efficiency Level IV.

4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.

5. For output negative connected to ground add suffix -G.

Max Output Power Output Voltage(2) Output Current Total Regulation(1) Efficiency(4) Model Number(5)

80 W

12 VDC 6.66 A 5%85% AEL80US12(3)

15 VDC 5.38 A 5%87% AEL80US15(3)

18 VDC 4.44 A 5%88% AEL80US18

24 VDC 3.33 A 5%87% AEL80US24

30 VDC 2.66 A 5%87% AEL80US30

36 VDC 2.22 A 5%88% AEL80US36

48 VDC 1.66 A 5%88% AEL80US48

Pin Connections

Pin Function

1 RTN

2 RTN

3 +VE

4 RTN

5+VE

SHELL GND

1. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.

2. Output connector: 5 pin 180° DIN

3. Output cable length: 48” (1220mm) approx.

4. Weight: 1.5 lbs (700 g)

5. For European mains lead order part: EU-MAINS-IEC.

6. For UK mains lead order part: UK-MAINS-IEC.

7. For US mains lead order part: US-MAINS-IEC.

8. Mains lead length is 78“ (2000 mm) approx

Notes

1.69 (43.0)

1.41 (36.0)

2.99 (76.0)

0.02 (0.5)

AC INPUT

IEC-320-C14 INLET

5.75 (146.0) 0.04 (1.0)

0.04 (1.0)

DC Output 5 Pin Plug

Mechanical Details

ACDC