VS-MBRS190TRPbF, VS-MBRS1100TRPbF Vishay Semiconductors Schottky Rectifier, 1.0 A FEATURES * Small foot print, surface mountable * Low forward voltage drop * High frequency operation Cathode Anode SMB * Guard ring for enhanced ruggedness and long term reliability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Compliant to RoHS directive 2002/95/EC * Designed and qualified for industrial level PRODUCT SUMMARY Package DO-214AA (SMB) IF(AV) 1A VR 90 V, 100 V VF at IF 0.78 V IRM 1 mA at 125 C TJ max. 175 C Diode variation Single die EAS 1.0 mJ DESCRIPTION The VS-MBRS190TRPbF, VS-MBRS1100TRPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS Rectangular waveform VRRM 1.0 A 90/100 V IFSM tp = 5 s sine 870 A VF 1.0 Apk, TJ = 125 C 0.63 V TJ Range - 55 to 175 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-MBRS190TRPbF VS-MBRS1100TRPbF UNITS 90 100 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) TEST CONDITIONS 50 % duty cycle at TL = 147 C, rectangular waveform 5 s sine or 3 s rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 1.0 870 A Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 0.5 A, L = 8 mH 1.0 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 0.5 A Document Number: 94315 Revision: 05-Jul-10 10 ms sine or 6 ms rect. pulse For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 50 www.vishay.com 1 VS-MBRS190TRPbF, VS-MBRS1100TRPbF Schottky Rectifier, 1.0 A Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop See fig. 1 VFM (1) Maximum reverse leakage current See fig. 2 IRM (1) Typical junction capacitance Typical series inductance Maximum voltage rate of change TEST CONDITIONS 1A TJ = 25 C 0.78 TJ = 125 C 0.62 TJ = 125 C VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C LS Measured lead to lead 5 mm from package body UNITS V 0.5 VR = Rated VR CT dV/dt VALUES TJ = 25 C mA 1.0 42 pF 2.0 nH 10 000 V/s VALUES UNITS - 55 to 175 C Rated VR Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg TEST CONDITIONS Maximum thermal resistance, junction to lead RthJL (2) DC operation See fig. 4 36 Maximum thermal resistance, junction to ambient RthJA DC operation 80 Approximate weight Marking device Case style SMB (similar to DO-214AA) C/W 0.10 g 0.003 oz. V19/V10 Notes (1) (2) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94315 Revision: 05-Jul-10 VS-MBRS190TRPbF, VS-MBRS1100TRPbF Schottky Rectifier, 1.0 A 10 Vishay Semiconductors 10 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) TJ = 175 C TJ = 175 C TJ = 125 C TJ = 25 C 1 1 TJ = 150 C TJ = 125 C 0.1 TJ = 100 C 0.01 TJ = 75 C TJ = 50 C 0.001 0.0001 TJ = 25 C 0.00001 0.1 0.2 0.4 0.6 0.8 0 1.0 20 40 60 80 100 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 TJ = 25 C 10 0 20 40 60 80 100 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 100 10 PDM t1 1 Single pulse (thermal resistance) 0.1 0.00001 0.0001 0.001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC . 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94315 Revision: 05-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VS-MBRS190TRPbF, VS-MBRS1100TRPbF Schottky Rectifier, 1.0 A 1.0 180 170 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 160 Average Power Loss (W) Allowable Case Temperature (C) Vishay Semiconductors 150 140 Square wave (D = 0.50) Rated VR applied 130 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0.8 0.6 RMS limit 0.4 DC 0.2 See note (1) 0 110 0 0.4 0.8 1.2 0 1.6 0.3 0.6 0.9 1.2 1.5 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Average Forward Current vs. Allowable Lead Temperature Fig. 6 - Maximum Average Forward Dissipation vs. Average Forward Current IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94315 Revision: 05-Jul-10 VS-MBRS190TRPbF, VS-MBRS1100TRPbF Schottky Rectifier, 1.0 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MBR 1 2 S 1 100 TR PbF 3 4 5 6 7 1 - Vishay Semiconductors product suffix 2 - Schottky MBR series 3 - S = SMB 4 - Current rating (1 = 1 A) 5 - Voltage rating 90 = 90 V 100 = 100 V 6 - TR = Tape and reel (3000 pieces) 7 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95017 Part marking information www.vishay.com/doc?95029 Packaging information www.vishay.com/doc?95034 Document Number: 94315 Revision: 05-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products SMB DIMENSIONS in millimeters (inches) 2.15 (0.085) 1.80 (0.071) 3.80 (0.150) 3.30 (0.130) 1 2 1 Polarity 4.70 (0.185) 4.10 (0.161) 2.5 TYP. (0.098 TYP.) 2 Part Number Soldering pad 2.40 (0.094) 1.90 (0.075) 1.30 (0.051) 0.76 (0.030) 5.60 (0.220) 5.00 (0.197) 0.30 (0.012) 0.15 (0.006) 2.0 TYP. (0.079 TYP.) 4.2 (0.165) 4.0 (0.157) Document Number: 95017 Revision: 25-Jun-07 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000