Full Size Euro-Look Rocker Switches
ROCKER SWITCHES
1
DESCRIPTION
Eaton’s 8004 and 8005
Euro-Look Series features matte
finish European styling and
snap-in mounting. These durable
switches, field-tested in the most
demanding truck and marine
applications, are available with
a variety of standard actuator
options. Options include concave,
two-face, illuminated,
non-illuminated, and the recessed
feature which allows placement of
your label on the face of our
rocker. All switches in this rugged
lineup can be fitted with a silicone
rubber seal to provide moisture
and dust resistance.
Additionally, these switches can
be gang-mounted into a single
panel opening. P anel blanks are
also available.
SPECIFICATIONS
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 HP @ 250V ac.
(Hp rating does not apply
to lighted switches).
CUR marked.
Recommended up to
15A @ 28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break
contact mechanism.
Butt action contact mechanism
designed specifically for use on
and low voltage applications.
Start with this ...to get to your
Base Circuit Number ...add each appropriate Code Number or Letter... Complete Catalog Number
Base Circuit Mounting Bulb Lamp Rocker Rocker Lens Seal Complete
Catalog Number Frame Voltage Wiring Style Color Color Option Catalog Number
8005K20 N 3 1 4 V 3 2 8005K20N314V32
HOW TO ORDER — FULL SIZE
To determine your Complete Catalog Number, you must start with the appropriate Base Circuit Number and add the appropriate
Code Letters and/or Numbers as in the example below:
FULL SIZE SELECTION TABLE
Rating
10A
250V ac
15A
125V ac
15A
28V dc
Black
White
Red
Gray
N
M
T
G
N/A N/A N/A N/A
Two Face
Concave
Paddle
Recessed
1
7
6
0
White
Red
Black
Gray
M
T
V
G
N/A N/A Non-
Sealed
Sealed
1
2
Poles
and
Throw
Circuit with Rocker in
UP CENTER DOWN
Position Position Position
BASE CIRCUIT
Termination Type
.250″Solder Screw
Spade Lugs Terminal
Terminal
1 P.S.T. 2-3 NONE OFF 8004K23 8004K24 8004K25
2-3* 8004K35 8004K36 8004K37
2-3 OFF 2-1 8004K20 8004K21 8004K22
1 P.D.T. 2-3 NONE 2-1 8004K26 8004K27 8004K28
2-3* OFF 2-1 8004K29 8004K30 8004K31
2-3* OFF 2-1* 8004K32 8004K33 8004K34
2 P.S.T. 2-3, 5-6 NONE OFF 8004K43 8004K44 8004K45
2-3, 5-6* 8004K55 8004K56 8004K57
2-3, 5-6 OFF 2-1, 5-4 8004K40 8004K41 8004K42
2-3, 5-6 NONE 2-1, 5-4 8004K46 8004K47 8004K48
2 P.D.T. 2-3, 5-6* OFF 2-1, 5-4 8004K49 8004K50 8004K51
2-3, 5-6* OFF 2-1, 5-4* 8004K52 8004K53 8004K54
2 P.D.TQ2-3, 5-6 2-3 OFF 8004K58 8004K59 8004K60
2 P.D.TW5-6 5-3 5-1 8004K61 8004K62 8004K63
10A
250V ac
15A
125V ac
15A
28V dc
Black
White
Red
Gray
N
M
T
G
14V dc
18V dc
28V dc
125V R
Neon
250V R
Neon
3
7
4
1
2
Dependent
on Circuit
Independent
of Circuit
1
2
Two Face
w/1 Lens
Two Face
w/2
Lenses E
Concave
w/1 Lens
Concave w/2
Lenses E
Recessed
w/1 Lens
Recessed
w/2 Lenses
3
4
8
9
2
5
White
Red
Black
Gray
M
T
V
G
Red
Green
Amber
No
Lens
Blue
2
3
4
5
6
Non-
Sealed
Sealed
1
2
1 P.S.T. 2-3 NONE OFF 8005K23 8005K24 8005K25
2-3* OFF NONE 8005K35 8005K36 8005K37
2-3 OFF 2-1 8005K20 8005K21 8005K22
1 P.D.T. 2-3 NONE 2-1 8005K26 8005K27 8005K28
2-3* OFF 2-1 8005K29 8005K30 8005K31
2-3* OFF 2-1* 8005K32 8005K33 8005K34
2 P.S.T. 2-3, 5-6 NONE OFF 8005K43 8005K44 8005K45
2-3, 5-6* OFF NONE 8005K55 8005K56 8005K57
2-3, 5-6 OFF 2-1, 5-4 8005K40 8005K41 8005K42
2 P.D.T.E2-3, 5-6 NONE 2-1, 5-4 8005K46 8005K47 8005K48
2-3, 5-6* OFF 2-1, 5-4 8005K49 8005K50 8005K51
2-3, 5-6* OFF 2-1, 5-4* 8005K52 8005K53 8005K54
CODE LETTERS AND NUMBERS — ADD TO BASE CIRCUIT NUMBER
Mounting Bulb Lamp Rocker Rocker Lens Seal
Frame Voltage Wiring Style Color Color Option
Color Code Voltage Code Type Code Type Code Color Code Color Code Type Code
Type
NON-ILLUMINATED NON-ILLUMINATED
ILLUMINATED ILLUMINATED
*Momentary contact.
Q3A @ 250V ac, 6A @ 125V ac.
W1/4 Hp @ 125-250V ac.
ENot available with lamp wired independent of circuit and provided with (2) lamps and (2) lens only
(use only rocker styles 4 and 9). Note: All double throw circuits both 1 pole and 2 pole require
(2) lamps and (2) lens when lamp wired dependent on circuit. When lamp wired independent of circuit
for 1PDT switches: device is supplied with 1 lamp and (2) lens (lamp centered in open pole of base).
RAvailable on single pole versions only.
1.32
59-01 Rocker Section 1 part 2 1/26/99 3:56 PM Page 1.32
44.04 ± .13
(1.734)
Panel Opening
Reference Only
Thickness: .76 to 4.83
(.030 to .190)
Best Results Obtained Between:
2.03 to 3.30
(0.080 to .130)
22.02 ± .13
(.867)
1
2
3
R.125 ± .13 13.18 ± .13
(.519)
27.61 ± .13
(1.087)
Surface Length Along
Bottom Of Recess:
28.50 ± .31 (1.122)
50.04
± .25
(1.970)
36.58
± .25
(1.440)
26.01 ± .25
(1.024) 17.5 ± .25
(.689)
10.03 ± .76
(.395) 11.18 ± .25
(.440)
40.69 ± .76
(1.602)
17.45 ± .38
(.687)
8.33 ± .38
(.328)
R 3.96
(R .156)
Typ.
123
456
2.29 ± .13
(2.286)
2.03
(.080)
0.79
(.031)
R 1.52
(R .060)
6.35 ± .81
(.250)
.032 thick
NON-ILLUMINATED
R.125 ± .13
R 3.96
(R .156)
Typ. R 1.52
(R .060)
26.01 ± .25
(1.024) 17.5 ± .25
(.689) 10.03 ± .76
(.395) 11.18 ± .25
(.440)
44.04 ± .13
(1.734)
22.02 ± .13
(.867)
1
2
3
13.18 ± .13
(.519)
27.61 ± .13
(1.087)
Surface Length Along
Bottom Of Recess:
28.50 ± .012 (1.122)
50.04
± .25
(1.970)
36.58
± .25
(1.440)
40.69 ± .76
(1.602)
17.45 ± .38
(.687)
8.33 ± .38
(.328)
123
456
6.35 ± .81
(.250)
.032 thick
2.29 ± .13
(.090)
2.03
(.080)
0.79
(.031)
Panel Opening
Reference Only
Thickness: .76 to 4.83
(.030 to .190)
Best Results Obtained Between:
2.03 to 3.30
(0.080 to .130)
ILLUMINATED
8004K23N6V2
Full Size
8005K21N319V22
Full Size
8005K25N315V32
Full Size
8005K21N319V62
Full Size
Contact Material:
Movable — Silver plated
copper with fine or coin silver
contact face button.
Stationary — Copper with fine
orcoin silver contact
facebutton.
Mechanical Life:
Momentary — 25,000
operations, minimum.
Maintained — 100,000
operations, minimum.
Electrical Life:
25,000 operations min.
atfullload.
Terminal Type:
Standard 6.35mm (.250″)
spade — Brass.
Screw — Brass (Cat.No.811-2
#6– 32 x 3/16 binding head
terminal screws are
providedunassembled).
Solder — Tintillate plated brass.
Tintillate spade terminals.
Rocker Material:
Custom styled, multicolored
thermoplastic rocker actuators.
The rocker and bezel are
supplied with a matte finish.
Lamps:
Five lamp voltages, 14V dc,
18V dc, 28V dc, 125V ac neon,
and 250V ac neon, are offered
as standard. For additional
lamp voltages, please
contactyour local Eaton
SalesRepresentative.
Base Material:
Thermoset molding material.
Dielectric:
1,000V RMS, minimum.
Mounting Means:
Snap-in mounting with
plasticbezel.
Seal:
Available in sealed and
non-sealed versions. Sealed
devices are furnished with a
silicone rubber seal providing
moisture and dust resistance.
Lens Catalog Numbers
(iforderedseparately):
8005 Two-Face:
Green. . . . . . . . . . . . 28-3425
Amber. . . . . . . . . . 28-3425-2
Red. . . . . . . . . . . . 28-3425-3
Blue. . . . . . . . . . . . 28-3425-4
White. . . . . . . . . . . 28-3425-5
8005 Concave:
Red. . . . . . . . . . . . . . 28-5148
Green. . . . . . . . . . . 28-5148-2
Amber. . . . . . . . . . 28-5148-3
Blue. . . . . . . . . . . . 28-5148-4
Clear. . . . . . . . . . . 28-5148-5
Options:
•Additional colors of rockers and
mounting bezels are available.
•Special circuits.
•Special ratings.
•Dry circuit capabilities.
•Pad-printed legends on
rocker & bezel.
•Special lamp voltages.
•Foam dust seal.
•Reversing jumpers.
•Printed circuit terminals and
other terminal types.
•Dead back cover (two pole
base) with wire leads.
•Matching indicators.
•Industry standard connector:
28-3426, see page 4.26.
•Full size Euro-look gang
mounting systems,
seepage4.27.
•Full size Euro-look panel plugs:
17-19544-2, seepage4.27.
For information on optical
features,contact your Eaton
SalesRepresentative.
Approvals:
Underwriter recognized and
recognized component for
Canada (CUR marked):
FileE2702.
DIMENSIONSAPPROXIMATE IN MM (INCHES)
C1.33
1
59-01 Rocker Section 1 part 2 1/26/99 3:56 PM Page 1.33
