EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LEDs with Inner Lens 11-21VGC/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Descriptions The 11-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Material Emitted Color GaP Green Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : Lens Color Water Clear http://www.everlight.com Rev. 2.1 Page: 1 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Package Outline Dimensions - + Notes: Tolerances Unless Dimension 0.1mm , Angle 0.5 ,Unit = mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Electrostatic Discharge ESD 2000 V Power Dissipation Pd 100 mW IF 160 mA Peak Forward Current (Duty 1/10 @1KHz) Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : 260 (for 5 second) http://www.everlight.com Rev. 2.1 Page: 2 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv deg IF=20mA Peak Wavelength p ------------- IF=20mA 21/2 18 60 570 mcd Viewing Angle 11 --------- nm IF=20mA d ----- 571 ----- nm IF=20mA Spectrum Radiation Bandwidth ----- 30 ----- nm IF=20mA Forward Voltage VF 1.7 2.1 2.4 V IF=20mA Reverse Current IR ----- ----- 10 A VR=5V Dominant Wavelength Reel & Carrier Tape Dimensions Loaded quantity per reel 2000 PCS/reel Notes: Tolerances Unless Dimension 0.1mm , Angle 0.5 ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : http://www.everlight.com Rev. 2.1 Page: 3 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : http://www.everlight.com Rev. 2.1 Page: 4 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Hours/Cycles Size Temp. : 240 5 6 min. 1 Reflow 22 Pcs. Min. 5 sec. H : +85 30min. 50 Cycles 22 Pcs. 2 Temperature Cycle 5 min. L : -55 30min. 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Ac/Rc 0/1 0/1 H : +100 5min. 10 sec. L : -10 5min. 50 Cycles 22 Pcs. 0/1 Temp. : 100 1000 Hrs. 22 Pcs. 0/1 Temp. : -55 1000 Hrs. 22 Pcs. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85/R.H85% 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : http://www.everlight.com Rev. 2.1 Page: 5 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of Temperature and RH are : 5~35, RH60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5~35, RH 60%, they should be treated at 60 5for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (Normal = blue) , you should treat them in the same conditions as 2.3. Soldering heat Reflow Temp / Time Soldering Iron Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10 -1sec). Power dissipation of Iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 . Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : http://www.everlight.com Rev. 2.1 Page: 6 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VGC/TR8 Rework 1. Customer must finish rework within 5 sec under 245. 2. The head of iron can not touch copper foil. 3. Twin-head type is preferred. x EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-111-024 ECN : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Rev. 2.1 Page: 7 of 7