1520 data 3 delay devices, inc. 10-TAP DIP/SMD DELAY LINE TD/TR = 5 (SERIES 1520) FEATURES * * * * * PACKAGES GND T1 10 taps of equal delay increment Delays to 1000ns Low profile Epoxy encapsulated Meets or exceeds MIL-D-23859C T3 T5 T6 T8 T10 1 14 2 3 13 12 4 5 11 10 6 7 9 8 IN N/C T7 T9 The 1520-series device is a fixed, single-input, tenoutput, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T10) in equal increments. The delay from IN to T10 (TD) and the characteristic impedance of the line (Z) are determined by the dash number. The rise time (TR) of the line is 20% of TD, and the 3dB bandwidth is given by 1.75 / TD. The device is available in a 14-pin DIP (1520) or a 14-pin SMD (1520S), and a wide range of pinouts may be specified. 1520(S)m - xxx - zzz p MOUNTING HEIGHT CODE See Table DELAY TIME Expressed in nanoseconds (ns) First two digits are significant figures Last digit specifies # of zeros to follow IMPEDANCE Expressed in nanoseconds (ns) First two digits are significant figures Last digit specifies # of zeros to follow Part numbers are constructed according to the scheme shown at right. For example, 1520C-101-500B is a 290 mil DIP, 100ns, 50 delay line with pinout code B. Similarly, 1520SB-201-251 is a 240 mil SMD, 200ns, 250 delay line with standard pinout. 50 Vdc 10% max. -55C to +125C -55C to +125C 100 PPM/C PINOUT CODES CODE STD A B C D E F G H I J K L N T U V W IN 14 1 2 7 1 2 1 2 2 1 1 1 13 1 1 2 2 1 T1 2 2 3 9 13 3 13 13 3 13 2 2 12 2 2 3 3 13 T2 12 13 4 6 2 4 2 3 4 2 13 3 11 3 3 4 4 2 Doc #97028 2/7/97 T3 3 3 5 10 12 5 12 12 12 12 3 4 10 4 4 5 5 12 T4 11 12 6 5 3 6 3 4 6 3 12 5 9 5 5 6 6 3 T5 4 4 7 11 11 7,8 11 11 7 11 4 6 7,8 6 6 8 8 11 T6 5 10 9 12 4 9 4 5 9 5 10 12 6 10 9 9 9 4 T7 10 5 10 3 10 10 10 10 10 10 5 11 5 11 10 10 10 10 T8 6 9 11 13 5 11 5 6 11 6 9 10 4 12 11 11 11 5 PINOUT CODE See Table Omit for STD pinout DELAY SPECIFICATIONS SERIES SPECIFICATIONS Dielectric breakdown: Distortion @ output: Operating temperature: Storage temperature: Temperature coefficient: Note: Standard pinout shown Other pinouts available GND PART NUMBER CONSTRUCTION FUNCTIONAL DESCRIPTION * * * * * IN Signal Input T1-T10 Tap Outputs GND Ground T2 T4 T9 9 6 12 2 9 12 9 9 12 9 6 9 3 13 12 12 12 9 T10 7 7 13 14 6 13 6 7 13 7 7 8 2 14 13 13 13 6 GND 1,8 14 1,14 1,8 7,8,14 1,14 7 8,14 1 8,14 8,14 7 1,14 7 7,14 1,7 1 7,14 TD (ns) 10 20 30 40 50 60 75 100 120 150 180 200 220 250 300 375 500 600 750 1000 TI (ns) 1.0 2.0 3.0 4.0 5.0 6.0 7.5 10.0 12.0 15.0 18.0 20.0 22.0 25.0 30.0 37.5 50.0 60.0 75.0 100.0 TR (ns) 3.0 5.5 6.5 8.0 10.0 12.0 15.0 20.0 24.0 30.0 36.0 40.0 44.0 50.0 60.0 75.0 100.0 120.0 150.0 200.0 Z=50 N/A 3 3 3 3 3 3 3 3 3 4 4 4 4 N/A N/A N/A N/A N/A N/A ATTENUATION (%) TYPICAL Z=100 Z=200 Z=300 Z=500 5 N/A N/A N/A 5 5 N/A N/A 5 5 N/A N/A 5 5 5 N/A 5 5 5 7 5 5 5 7 5 5 5 7 5 5 7 7 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 8 10 10 7 8 10 10 8 10 12 12 N/A N/A 15 15 N/A N/A 15 20 N/A N/A N/A 20 Notes: TI represents nominal tap-to-tap delay increment Tolerance on TD = 5% or 2ns, whichever is greater Tolerance on TI = 5% or 1ns, whichever is greater "N/A" indicates that delay is not available at this Z DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 1997 Data Delay Devices 1 1520 FUNCTIONAL DIAGRAM MOUNTING HEIGHT CODES T1 T2 T3 T4 T5 T6 T7 T8 T9 IN T10 GND GND CODE A B C Note: HEIGHT (MAX) 0.187 0.240 0.290 DIP Yes Yes Yes SMD No Yes Yes Codes A and B are not available for all values of TD Contact technical staff for details PACKAGE DIMENSIONS 14 13 12 11 10 9 8 Lead Material: Nickel-Iron alloy 42 TIN PLATE 1 2 3 4 5 6 7 .280 MAX. .780 MAX. See Table .015 TYP. .010.002 .018 TYP. .070 MAX. .350 MAX. .600.010 6 Equal spaces each .100.010 Non-Accumulative 1520-xx (DIP) .020 TYP. .040 TYP. 14 13 12 11 10 9 .010 TYP. 8 .270 TYP. 1 2 3 .090 4 5 6 .430 TYP. 7 .100 .600 .790 MAX. See Table .050 TYP. 1520S-xx (Gull-Wing) Doc #97028 2/7/97 DATA DELAY DEVICES, INC. Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com 2 1520 PASSIVE DELAY LINE TEST SPECIFICATIONS TEST CONDITIONS INPUT: Ambient Temperature: Input Pulse: OUTPUT: Rload: Cload: Threshold: 25oC 3oC High = 3.0V typical Low = 0.0V typical Source Impedance: 50 Max. Rise/Fall Time: 3.0 ns Max. (measured at 10% and 90% levels) Pulse Width (TD <= 75ns): PWIN = 100ns Period (TD <= 75ns): PERIN = 1000ns Pulse Width (TD > 75ns): PWIN = 2 x TD Period (TD > 75ns): PERIN = 10 x TD 10M 10pf 50% (Rising & Falling) NOTE: The above conditions are for test only and do not in any way restrict the operation of the device. PERIN PWIN TRISE INPUT SIGNAL TFALL VIH 90% 50% 10% 90% 50% 10% TRISE VIL TFALL TRISE OUTPUT SIGNAL 90% 50% 10% TFALL VOH 90% 50% 10% VOL Timing Diagram For Testing OUT PULSE GENERATOR RIN IN TRIG 50 DEVICE UNDER TEST (DUT) IN T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 TRIG OSCILLOSCOPE ROUT RIN = ROUT = ZLINE Test Setup Doc #97028 2/7/97 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 3