P.O. Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) FAIR RITE / (845) 895-2055 • FAX:(888) FERRITE / (845) 895-2629 • www.fair-rite.com • E-Mail: ferrites@fair-rite.com
(888) 324-7748 (888) 337-7483 Note: (914) Area Code has changed to (845).
Fair-Rite Pr oducts Corp.
14th Edition50
Chip Beads
Fair-Rite offers a broad selection of chip beads used to suppress EMI in a wide variety of devices
such as computers, cellular phones, digital communication equipment, televisions, pagers, and
VCRs.
Low current, medium current, and high current chip beads are available. Fair-Rite’s chip beads
are controlled 100% for impedance and DCR. They are suitable for both wave and reflow solder
processes.
Standard and high signal speed parts are available. Standard speed signal chip beads are de-
signed for general noise suppression over a wide frequency range. The high speed signal chip
beads offer low impedance at frequencies below 50 MHz and then the impedance increases
rapidly to its peak at >100 MHz.
•The 0603 and 0805 beads are supplied 4000 pieces per 7” reel or 10000 pieces per 13” reel. The 1206 beads are supplied
3000 pieces per 7” reel or 10000 pieces per 13” reel. The 1806 beads are supplied 2000 pieces per 7” reel or 10000 pieces
per 13” reel. The 1812 beads are supplied 1000 pieces per 7” reel or 5000 pieces per 13” reel.
•The tape width for the 0603, 0805, and 1206 beads is 8mm with a component pitch of 4mm. The tape width for the 1806 and
1812 beads is 12mm with a component pitch of 8mm.
•The contacts are tin/lead plated. Standard reflow soldering profile is shown below.
•Recommended storage and operating temperature is –55oC to +125oC.
•For impedance vs. frequency curves and DC bias curves for these parts, please see Figures 1-61.
•For any chip bead requirement not listed, please contact our customer service group for availability and pricing.
•The Chip Bead Kit (part number 0199000018)is available for prototype evaluation. See page 92.
Part Number System: Example 2512063017Y1
25 1206 301 7 Y 1
Chip Package Impedance Packaging Mat eri al Current Code
Bead Size Code Code Code 0 < 1.0A
Code Code 6= Bulk Packed Y = Standard Signal Speed 1 > 1.0A < 2.0A
7= Taped and Reeled 7” Reel Z= High Signal Speed 3 > 3.0A < 4.0A
8= Taped and Reeled 13” Reel 6 > 6.0A < 7.0A
D
B
C
A
183
o
C
60 sec. min. 60 sec. max.
Max. Temp.
230
o
C
(Melting area of solder)
Pre-Heating Soldering Cooling
300
250
200
150
100
50
0
Temperature (
o
C)
Standard Soldering Profile
Side View