AWB7223 1.930 -1.995 GHz Small-Cell Power Amplifier Module Data Sheet FEATURES * InGaP HBT Technology * -51 dBc ACPR @ 5 MHz, +27 dBm * 30.5 dB Gain * High Efficiency * Low Transistor Junction Temperature * Matched for a 50 System * Low Profile Miniature Surface Mount Package; RoHS Compliant * Multi-Carrier Capability APPLICATIONS * WCDMA, HSDPA and LTE Air Interfaces M52 Package 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module * Picocell, Femtocell, Home Nodes * Customer Premises Equipment (CPE) * Data Cards and Terminals PRODUCT DESCRIPTION The AWB7223 is a fully matched, Multi-Chip-Module (MCM) designed for picocell, femtocell, and customer premises equipment (CPE) applications. Its high linearity and efficiency meet the extremely demanding needs of small cell infrastructure architectures. Designed for WCDMA, HSDPA, and LTE air interfaces operating in the 1.930 GHz to 1.995 GHz band, the AWB7223 delivers up to +27 dBm of WCDMA (64 DPCH) power with an ACPR better than -50 dBc. It Vcc 1 RF Input operates from a convenient +4.5 V supply and provides 30.5 dB of gain. The device is manufactured using an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. The self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates RF matching networks optimized for output power, efficiency, and linearity in a 50 system. Vcc 2 Matching Network Matching Network Bias Network Matching Network Matching Network Bias Network VREF RF Output Power Detector VDET Figure 1: Block Diagram 204238B * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * September 20, 2016 AWB7223 VREF 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND GND 6 9 GND VDET 7 8 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME 1 VREF Reference Voltage 2 GND Ground 3 GND Ground 4 VCC1 Supply Voltage 5 RFIN RF Input 6 GND Ground 7 VDET Detector Output 8 GND Ground 9 GND Ground 10 GND Ground 11 VCC2 Supply Voltage 12 RFOUT RF Output 13 GND Ground 14 GND Ground DESCRIPTION Data Sheet September 20, 2016 * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * 204238B AWB7223 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Reference Voltage (VREF) 0 +3.5 V RF Output Power (POUT) - +30 dBm, modulated RF Input Power (PIN) - +10 dBm, CW Class 1C Class IV - MSL Rating (3) 4 - Junction Temperature (TJ) - +150 C -40 +150 C ESD Rating Human Body Model (1) Charged Device Model (2) Storage Temperature (TSTG) Functional operation is not implied under these conditions. Exceeding any one or a combination of the Absolute Maximum Rating Conditions may cause permanent damage to the device. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: (1) JEDEC JS-001-2010. (2) JEDEC JESD22-C101D. (3) 260 C peak reflow. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1930 - 1995 MHz Supply Voltage (VCC) +3.6 +4.5 +4.65 V Reference Voltage (VREF) +2.80 0 +2.85 - +2.90 +0.5 V RF Output Power (POUT) (1) - +27 - dBm Case Temperature (TC) (2) -40 - +85 C COMMENTS PA "on" PA "shut down" The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) Typ RF Output Power is used during production test. (2) Case Temperature references the board temperature at the ground paddle on the backside of the package. Data Sheet 204238B * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * September 20, 2016 3 AWB7223 Table 4: Electrical Specifications (TC = +25 C, VCC = +4.5 V, VREF = +2.85 V, 50 system) PARAMETER MIN TYP MAX UNIT 27 30.5 34 dB - -51 -63 -47 -60 dBc 12 15.5 - % - 12 - C/W - 720 930 mA Quiescent Current (Icq) 196 227 290 mA Reference Current 10 13 18 mA through VREF pin Leakage Current - 3 10 A VCC = +5 V, VREF = 0 V Harmonics 2fO 3fO, 4fO - -50 -54 -45 -50 dBc Input Return Loss 15 20 - dB Output Return Loss 15 20 - dB - +35 - dBm CW tone Gain (2) ACPR (1), (2), (3) @ 5 MHz @ 10 MHz Power-Added Efficiency (1), (2), (3) Thermal Resistance (RJC) (4) Supply Current (1), (2), (3) P1dB Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure COMMENTS 1930 - 1995 MHz Junction to Case total through VCC pins - - -60 dBc POUT +27 dBm In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all voltage and temperature operating ranges 8:1 - - VSWR VCC = +4.5 V, POUT = +27 dBm Applies over full operating temperature range Notes: (1) ACPR and Efficiency measured at 1960 MHz. (2) POUT = +27 dBm. (3) TM1 WCDMA 64 DPCH. (4) Use only VCC2 (pin 11) current when calculating device junction temperature. 4 Data Sheet September 20, 2016 * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * 204238B AWB7223 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes. Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VREF voltage. VREF 0.1uF 1000pF VCC1 TVS Diode 100uF 10uF 0.1uF 1000pF RF Input DETOUT 0.1uF 100K 4.7K VREF 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND GND 6 9 GND VDET 7 8 GND AWB7223 RF Output VCC2 1000pF 0.1uF 10uF 100uF 100uF TVS Diode GND at slug Notes: 1. 10uF and 100uF capacitors are optional. 2. Applications that have large supply voltage transients may benefit from the use of TVS diodes. For such applications, recommended TVS diodes are SM05T1G or SMJ5.0A. Figure 3: Application Circuit Schematic Data Sheet 204238B * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * September 20, 2016 5 AWB7223 Figure 4: PCB Footprint 6 Data Sheet September 20, 2016 * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * 204238B AWB7223 PACKAGE OUTLINE Figure 5: M52 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module Pin 1 Identifier Part Number Date Code YY= Year WW= Work Week Marking Code B7223R Lot Number Country Code Figure 6: Branding Specification Data Sheet 204238B * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * September 20, 2016 7 AWB7223 COMPONENT PACKAGING PIN 1 Figure 7: Tape & Reel Packaging Table 5: Tape & Reel Dimensions 8 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 7 mm x 7 mm x 1.3 mm 16 mm 12 mm 2500 13" Data Sheet September 20, 2016 * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * 204238B AWB7223 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWB7223RM52P7 -40 C to +85 C RoHS-compliant 14 Pin 20 pin, 4 x 4 x 0.80 mm Surface Mount Module Bags AWB7223RM52P8 -40 C to +85 C RoHS-compliant 14 Pin 20 pin, 4 x 4 x 0.80 mm Surface Mount Module Tape and Reel, 2500 pieces per Reel AWB7223RM52P9 -40 C to +85 C RoHS-compliant 14 Pin 20 pin, 4 x 4 x 0.80 mm Surface Mount Module Partial Reel Data Sheet 204238B * Skyworks Proprietary and Confidential Information * Products and Product Information are Subject to Change Without Notice * September 20, 2016 9 AWB7223 Copyright (c) 2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice 10 Data Sheet 204238B * September 20, 2016