https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page1/6
FO converters-PSI-MOS-DNET CAN/FO 660/EM-2708067
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
FO converter with integrated optical diagnosis, for DeviceNet™, CAN, CANopen® to 800 kbps, extension/
redundancy module, interfaces: 1x FO (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Data rates of up to 800 kbps, set via DIP switches
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Integrated optical diagnostics for continuous monitoring of fiber optic paths
High-quality electrical isolation between all interfaces (DeviceNet // fiber optic port // power supply // backplane)
Integrated bus termination resistor can be connected internally
Integrated backplane for routing through the supply voltage and data signals
Connections can be plugged in using a COMBICON screw terminal block
Floating switch contact in the basic module for leading alarm generation in relation to critical fiber optic paths
Key commercial data
Packing unit 1 pc
Weight per Piece (excluding packing) 162.8 GRM
Custom tariff number 85176200
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 22.5 mm
https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page2/6
FO converters-PSI-MOS-DNET CAN/FO 660/EM-2708067
Technical data
Dimensions
Height 99 mm
Depth 114.5 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 30 % ... 95 % (non-condensing)
Altitude 5000 m (For restrictions see manufacturer's declaration)
Degree of protection IP20
Noise immunity EN 61000-6-2:2005
Serial interface
Interface 1 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN,
CANopen
Connection method Pluggable screw connection
File format/coding Bit stuffing, NRZ
Transmission medium Copper
Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used)
Serial transmission speed ≤ 800 kbps
Optical interface FO
Transmit capacity, minimum -6.2 dBm (980/1000 µm)
-16.9 dBm (200/230 µm)
Minimum receiver sensitivity -30.2 dBm
Wavelength 660 nm
Transmission length incl. 3 dB system reserve 100 m (With F-P 980/1000 230 dB/km with quick mounting connector)
800 m (With F-K 200/230 10 dB/km with quick mounting connector)
Transmission medium Polymer fiber
HCS fiber
Connection method F-SMA
Digital outputs
Output name Relay output
Output description Alarm output
Number of outputs 1
Maximum switching voltage 60 V DC
42 V AC
Limiting continuous current 0.46 A
Power supply
https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page3/6
FO converters-PSI-MOS-DNET CAN/FO 660/EM-2708067
Technical data
Power supply
Supply voltage range 10 V DC ... 30 V DC
Max. current consumption 100 mA
Typical current consumption 100 mA (24 V DC)
Connection method Pluggable COMBICON screw terminal block through basic module
General
Bit distortion, input ± 35 % (permitted)
Bit distortion, output < 6.25 %
Electrical isolation VCC // CAN
Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 55011
Housing material PA 6.6-FR
Color green
MTBF 456 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5
days a week, 8 hours a day))
89 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle
(5 days a week, 12 hours a day))
Conformance CE-compliant
ATEX  II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions
in the documentation!)
 II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special
installation instructions in the documentation!)
UL, USA / Canada Class I, Zone 2, AEx nc IIC T5
Class I, Div. 2, Groups A, B, C, D
Classifications
eCl@ss
eCl@ss 4.0 27230207
eCl@ss 4.1 27230207
eCl@ss 5.0 27230207
eCl@ss 5.1 27230207
eCl@ss 6.0 27230207
eCl@ss 7.0 27230207
eCl@ss 8.0 27143136
ETIM
ETIM 2.0 EC001423
https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page4/6
FO converters-PSI-MOS-DNET CAN/FO 660/EM-2708067
Classifications
ETIM
ETIM 3.0 EC001423
ETIM 4.0 EC001423
ETIM 5.0 EC001423
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 43201553
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
ATEX / UL Listed
Approvals submitted
Approval details
UL Recognized
cUL Recognized
cULus Recognized
https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page5/6
FO converters-PSI-MOS-DNET CAN/FO 660/EM-2708067
Drawings
Application drawing
B
B
BE
BE
Branchline/redundantbranchline
FO
Application drawing
BEBB
Linearstructure
FOFO
...64x ...64x ...64x
Application drawing
BEEE
B B B B
...20
BE
BE
BE
BEBEBE...20
Starstructure/redundantstarstructure
FO
Application drawing
BEE
BEE
BEE
BEE
BBBBBB
Treestructure
FO
FO
Block diagram
*) Only in the basic module
https://www.phoenixcontact.com/us/products/2708067
09/05/2014Page6/6
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com